Premium Information is available for this item - Upgrade for $1 a day
5305-01-351-7817
Close Tolerance Screw
5305013517817 013517817 AIC4409-5D19 PBF1418-5D19 123740-5D19 HR241-5D19 SC5057-5D19 03A160-5D19 VCL0007-5D19 SLB218-5D19 DF33006-5D19 X167-5D19
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
13
Marketplace 5305-01-351-7817
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-351-7817 4+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-351-7817 RQST NE Updated Every Day 5305-01-351-7817 RQST Updated
Every Day 5305-01-351-7817 RQST NE Related Documents 5305-01-351-7817 4+ Documents ( More... ) https
HR241-5D19 SC5057-5D19 03A160-5D19 VCL0007-5D19 https//www.nsnlookup.com /fsg-62/fsc-6240/us 6240-01
Close Tolerance Screw 5305013517817 013517817 PBF1418-5D19 123740-5D19 HR241-5D19 SC5057-5D19 03A160
DF33006-5D19 X167 -5D19 A SCREW https//www.nsnlookup.com /fsg-62/fsc-6240/us 6240-01-472-5404 Control
Upgrade your Account Upgrade 6240-01-472-5404Control https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-351-7817
DF33006-5D19 X167 -5D19 A SCREW 122895-5D19 11823-5D19 WC744 123740-5D19 HR241-5D19 123740-5D19
HR241-5D19 SC5057-5D19 03A160-5D19 VCL0007- Close Tolerance Bolt 5306014622748014622748PBF1265-5D19122895
Restrictions 5305-01-351-7817
5305-01-351-7817 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-351-7817
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-351-7817
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-351-7817
- Part Number
- Manufacturer
- Status
- AIC4409-5D19
- Manufacturer
- 06725 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- PBF1418-5D19
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 123740-5D19
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HR241-5D19
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- SC5057-5D19
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 03A160-5D19
- 76823 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- VCL0007-5D19
- 06710 - Valley-Todeco, Inc. (Active)
- Secondary Buy
- Secondary Buy
- SLB218-5D19
- 16258 - Space-Lok, Inc. (Active)
- Secondary Buy
- Secondary Buy
- X167-5D19
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- DF33006-5D19
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- 03A160-5D19
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- HR241-5D19
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- X167-5D19
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- DF33006-5D19
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-351-7817
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 1.544 Inches Minimum First Hole And 1.594 Inches Maximum First Hole
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.674 Inches Minimum And 1.704 Inches Maximum
- Grip Diameter [AAUR]
- 0.311 Inches Minimum And 0.312 Inches Maximum
- Grip Length [ANEE]
- 1.178 Inches Minimum And 1.198 Inches Maximum
- Head Diameter [AASL]
- 0.428 Inches Minimum And 0.478 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Nickel Alloy 718 Overall
- Minimum Tensile Strength [CQBC]
- 125000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams 5662 Assn Std Single Material Response Overall
- Shank Unthreaded Hole Diameter [AAWB]
- 0.076 Inches Minimum First Hole And 0.086 Inches Maximum First Hole
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.476 Inches Minimum And 0.526 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
DLA Procurement Analysis 5305-01-351-7817
Management Data 5305-01-351-7817
Similar Supply Items to 5305-01-351-7817
Freight Information 5305-01-351-7817
5305-01-351-7817 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-351-7817 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-351-7817 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-351-7817 is not classified as a special type of cargo when transported by water. 5305-01-351-7817 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-351-7817
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Any Suitable Container
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-351-7817 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: