Premium Information is available for this item - Upgrade for $1 a day
5305-01-338-3150
Panel Screw Assembly
5305013383150 013383150 DXH7900-10-F-6 CS3018-3-186 965368-186C
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. View more Panel Screw Assembly
May 2023
6
Marketplace 5305-01-338-3150
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-338-3150 2+ Documents (More...)
Restrictions 5305-01-338-3150
5305-01-338-3150 is a Panel Screw Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-338-3150
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-338-3150
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-338-3150
- Part Number
- Manufacturer
- Status
- DXH7900-10-F-6
- Manufacturer
- 17419 - Deutsch Co The (Active)
- Primary Buy
- Primary Buy
- CS3018-3-186
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 965368-186C
- 82577 - Raytheon Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-338-3150
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 1.030 Inches Minimum And 1.060 Inches Maximum
- Head Height [AASU]
- 0.115 Inches Minimum And 0.135 Inches Maximum
- Head Diameter [AASL]
- 0.346 Inches Minimum And 0.376 Inches Maximum
- Head Style [AASK]
- Pan No. 2
- Material [MATT]
- Iron Alloy 660 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Hexagon
- Material Accommodated Thickness [AGSM]
- 0.313 Inches Minimum And 0.375 Inches Maximum
- Special Features [FEAT]
- Sleeve Fits On Shank Portion Of Screw Up To Bearing Surface Of Head And Is Also Spring Loaded
- Thread Series Designator [THSD]
- Unf
- Width Across Flats [ASDB]
- 0.1406 Inches Minimum And 0.1426 Inches Maximum
- Surface Treatment Document And Classification [STDC]
- Qq-P-35,Ty1,2 Or 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.189 Inches Minimum And 0.199 Inches Maximum
- Thread Class [AAJD]
- 3A
- Thread Quantity Per Inch [CMLP]
- 32
DLA Procurement Analysis 5305-01-338-3150
Management Data 5305-01-338-3150
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-338-3150
Freight Information 5305-01-338-3150
5305-01-338-3150 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-338-3150 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-338-3150 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-338-3150 is not classified as a special type of cargo when transported by water. 5305-01-338-3150 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-338-3150 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: