Premium Information is available for this item - Upgrade for $1 a day
5305-01-337-3292
Close Tolerance Screw
5305013373292 013373292 HT4075D5-16-78
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
May 2023
8
Marketplace 5305-01-337-3292
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-337-3292 5+ Documents (More...)
Close Tolerance Screw 5305013373292 013373292 5305-01-337-3292 5305013373292 013373292 is a screw
Close Tolerance Screw 5305013373292 013373292 5305-01-337-3292 5305013373292 013373292 is a screw
Close Tolerance Screw 5305013373292 013373292 5305-01-337-3292 5305013373292 013373292 is a screw
Close Tolerance Screw 5305013373292 013373292 5305-01-337-3292 5305013373292 013373292 is a screw
Close Tolerance Screw 5305013373292 013373292 5305-01-337-3292 5305013373292 013373292 is a screw
Restrictions 5305-01-337-3292
5305-01-337-3292 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-337-3292
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-337-3292
- National Security Agency (DGX1)
- Effective Date:
- 1 Apr 2007
Approved Sources 5305-01-337-3292
- Part Number
- Manufacturer
- Status
- HT4075D5-16-78
- Manufacturer
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- HT4075D5-16-78
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HT4075D5-16-78
- 17419 - Deutsch Co The (Active)
- Secondary Buy
- Secondary Buy
- HT4075D5-16-78
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HT4075D5-16-78
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4075D5-16-78
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4075D5-16-78
- 17446 - Huck International, Inc. (Active)
- Advisory Reference
- Advisory Reference
- HT4075D5-16-78
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-337-3292
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.516 Inches Minimum And 1.546 Inches Maximum
- Grip Diameter [AAUR]
- 0.3115 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 0.990 Inches Minimum And 1.010 Inches Maximum
- Head Diameter [AASL]
- 0.575 Inches Minimum And 0.635 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Comp Xm-13 Overall
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams 5629 Assn Std Single Material Response Overall
- Special Features [FEAT]
- Tapped Hole In Head 0.138-32 Unjc-3B Threads. Distance From Top Of Head To Injection Port 0.780 Nom. Inch. Injection Port 0.120 Nom. In. Lg; 0.060 Nom. In. Wide
- Thread Series Designator [THSD]
- Unjf
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head32.0 Microinches Grip32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.531 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 24
DLA Procurement Analysis 5305-01-337-3292
Management Data 5305-01-337-3292
NATO Stock Numbers Related to 5305-01-337-3292
Freight Information 5305-01-337-3292
5305-01-337-3292 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-337-3292 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-337-3292 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-337-3292 is not classified as a special type of cargo when transported by water. 5305-01-337-3292 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-337-3292 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: