Premium Information is available for this item - Upgrade for $1 a day
5305-01-332-1510
Panel Screw Assembly
5305013321510 013321510 FT1046-27A 841581-027 841581-27
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. View more Panel Screw Assembly
June 2023
8
Marketplace 5305-01-332-1510
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-332-1510 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-332-1510 RQST NE Updated Every Day 5305-01-332-1510 RQST
Updated Every Day 5305-01-332-1510 RQST NE Related Documents 5305-01-332-1510 1+ Documents ( More...
Restrictions 5305-01-332-1510
5305-01-332-1510 is a Panel Screw Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-332-1510
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-332-1510
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Aug 2005
Approved Sources 5305-01-332-1510
- Part Number
- Manufacturer
- Status
- FT1046-27A
- Manufacturer
- 58794 - Fastener Technology Corp (Active)
- Primary Buy
- Primary Buy
- 841581-027
- 06481 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- 841581-27
- 06481 - Northrop Grumman Systems Corporation (Active)
- Secondary Buy
- Secondary Buy
- 841581-27
- 13973 - Litton Systems Inc. Div Navigation (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 841581-027
- 13973 - Litton Systems Inc. Div Navigation (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-332-1510
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Fastener Length [AASB]
- 1.047 Inches Minimum And 1.077 Inches Maximum
- Head Height [AASU]
- 0.065 Inches Minimum And 0.095 Inches Maximum
- Head Diameter [AASL]
- 0.204 Inches Minimum And 0.234 Inches Maximum
- Head Style [AASK]
- Pan
- Material Document And Classification [MDCL]
- Mil-S-5059 Mil Spec Single Material Response Primary Washer
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Stand-Off
- Material [MATT]
- Steel Comp 301 Primary Washer
- Material [MATT]
- Steel Comp 302 Fastener
- Material [MATT]
- Steel Comp 302 Spring
- Material [MATT]
- Steel Comp 304 Stand-Off
- Nominal Thread Diameter [AHYM]
- 0.112 Inches
- Internal Drive Style [ABQZ]
- Cross Recess Type 1
- Material Accommodated Thickness [AGSM]
- 0.063 Inches Minimum And 0.125 Inches Maximum
- Material Document And Classification [MDCL]
- Ams 5688 Assn Std Single Material Response Spring
- Material Document And Classification [MDCL]
- Astm A493 Assn Std Single Material Response Fastener
- Thread Quantity Per Inch [CMLP]
- 40
- Thread Series Designator [THSD]
- Unc
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924 Mil Spec Single Treatment Response Primary Washer
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924 Mil Spec Single Treatment Response Fastener
- Surface Treatment Document And Classification [STDC]
- Mil-C-13924 Mil Spec Single Treatment Response Stand-Off
- Surface Treatment Document And Classification [STDC]
- Qq-P-35 Fed Spec Single Treatment Response Spring
- Surface Treatment [SFTT]
- Oxide Fastener
- Surface Treatment [SFTT]
- Oxide Primary Washer
- Surface Treatment [SFTT]
- Oxide Stand-Off
- Surface Treatment [SFTT]
- Passivate Spring
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.188 Inches Minimum And 0.233 Inches Maximum
- Thread Class [AAJD]
- 2A
DLA Procurement Analysis 5305-01-332-1510
Management Data 5305-01-332-1510
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
- Physical Category:
- 1
- Bin
Similar Supply Items to 5305-01-332-1510
Freight Information 5305-01-332-1510
5305-01-332-1510 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-332-1510 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-332-1510 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-332-1510 is not classified as a special type of cargo when transported by water. 5305-01-332-1510 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-332-1510 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: