Premium Information is available for this item - Upgrade for $1 a day
5305-01-327-9692
Close Tolerance Screw
5305013279692 013279692 12743-4-20A 03A174-4-20A PBP1417-4-20A PBF1417-4-20A SLB146-4-20A 123743-4-20A AIC1652-4-20A SC3102-4-20A HR240-4-20A T009-4-20A
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
14
Marketplace 5305-01-327-9692
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-327-9692 1+ Documents (More...)
4-20A HR240-4-20A T009-4-20A A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is
BUY NE FedMall Updated Every Day 5305-01-327-9692 RQST NE Updated Every Day 5305-01-327-9692 RQST
Restrictions 5305-01-327-9692
5305-01-327-9692 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-327-9692
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-327-9692
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-327-9692
- Part Number
- Manufacturer
- Status
- 03A174-4-20A
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Original Design
- Original Design
- PBP1417-4-20A
- 27624 - Sps Technologies Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 03A174-4-20A
- 1W025 - Northrop Grumman Systems Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- PBF1417-4-20A
- 27624 - Sps Technologies Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SLB146-4-20A
- 16258 - Space-Lok, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 123743-4-20A
- 80539 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AIC1652-4-20A
- 06725 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SC3102-4-20A
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HR240-4-20A
- 73197 - Hi-Shear Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- SC3102-4-20A
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- T009-4-20A
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 12743-4-20A
- 80539 - Sps Technologies, Llc (Active)
- Advisory Reference
- Advisory Reference
- 03A174-4-20A
- 0JRC1 - Northrop Grumman Technical Services, (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-327-9692
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.660 Inches Minimum And 1.690 Inches Maximum
- Grip Diameter [AAUR]
- 0.2485 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 1.240 Inches Minimum And 1.260 Inches Maximum
- Head Diameter [AASL]
- 0.449 Inches Minimum And 0.507 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Titanium Alloy Uns R56400 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams4928 Assn Std Single Material Response Overall Or Ams4967 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Nas4006 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Aluminum Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.425 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 28
DLA Procurement Analysis 5305-01-327-9692
Management Data 5305-01-327-9692
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5305-01-327-9692
Freight Information 5305-01-327-9692
5305-01-327-9692 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-327-9692 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-327-9692 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-327-9692 is not classified as a special type of cargo when transported by water. 5305-01-327-9692 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-327-9692 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- J
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: