Premium Information is available for this item - Upgrade for $1 a day
5305-01-327-9690
Close Tolerance Screw
5305013279690 013279690 12743-4-13A 03A174-4-13A HR240-4-13A SLB146-4-13A AIC1652-4-13A PBF1417-4-13A 123743-4-13A SC3102-4-13A PBP1417-4-13A T009-4-13A
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
18
Marketplace 5305-01-327-9690
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-327-9690 1+ Documents (More...)
13A PBP1417-4-13A T009-4-13A A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is
BUY NE FedMall Updated Every Day 5305-01-327-9690 RQST NE Updated Every Day 5305-01-327-9690 RQST
Restrictions 5305-01-327-9690
5305-01-327-9690 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-327-9690
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-327-9690
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
Approved Sources 5305-01-327-9690
- Part Number
- Manufacturer
- Status
- 03A174-4-13A
- Manufacturer
- 76823 - Northrop Grumman Systems Corporation (Active)
- Original Design
- Original Design
- 03A174-4-13A
- 1W025 - Northrop Grumman Systems Corp (Active)
- Secondary Buy
- Secondary Buy
- HR240-4-13A
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- SLB146-4-13A
- 16258 - Space-Lok, Inc. (Active)
- Secondary Buy
- Secondary Buy
- AIC1652-4-13A
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- PBF1417-4-13A
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- 123743-4-13A
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- SC3102-4-13A
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- HR240-4-13A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- SC3102-4-13A
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 03A174-4-13A
- 0PTK6 - Sps Technologies Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- PBP1417-4-13A
- 27624 - Sps Technologies Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- T009-4-13A
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 12743-4-13A
- 80539 - Sps Technologies, Llc (Active)
- Advisory Reference
- Advisory Reference
- 03A174-4-13A
- 0JRC1 - Northrop Grumman Technical Services, (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-327-9690
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.222 Inches Minimum And 1.252 Inches Maximum
- Grip Diameter [AAUR]
- 0.2485 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 0.802 Inches Minimum And 0.822 Inches Maximum
- Head Diameter [AASL]
- 0.449 Inches Minimum And 0.507 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Titanium Alloy Uns R56400 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams4928 Assn Std Single Material Response Overall Or Ams4967 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unjf
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Nas4006 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Aluminum Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.425 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5305-01-327-9690
DLA Procurement Analysis 5305-01-327-9690
- Last Stock Position:
- 1216 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-327-9690
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5305-01-327-9690
Freight Information 5305-01-327-9690
5305-01-327-9690 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-327-9690 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-327-9690 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 573 for ocean manifesting and military sealift. 5305-01-327-9690 is not classified as a special type of cargo when transported by water. 5305-01-327-9690 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-327-9690
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-327-9690 11 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A623V185T
- 28 Apr 2023
- Subscribe
- 497
- Subscribe
- Subscribe
- Subscribe
- SPE4A623V184E
- 26 Apr 2023
- Subscribe
- 2111
- Subscribe
- Subscribe
- Subscribe
- SPE4A622V7583
- 20 Dec 2021
- Subscribe
- 1050
- Subscribe
- Subscribe
- Subscribe
- SPE4A621V488D
- 06 Jul 2021
- Subscribe
- 1100
- Subscribe
- Subscribe
- Subscribe
- SPE4A621V336C
- 14 May 2021
- Subscribe
- 1264
- Subscribe
- Subscribe
- Subscribe
- SPE5E319V1342P00001
- 05 Nov 2018
- Subscribe
- 1035
- Subscribe
- Subscribe
- Subscribe
- SPE5E319V0385
- 10 Oct 2018
- Subscribe
- 196
- Subscribe
- Subscribe
- Subscribe
- SPE5E318V8775
- 11 Sep 2018
- Subscribe
- 1632
- Subscribe
- Subscribe
- Subscribe
- SPE5E317V0555
- 23 Feb 2017
- Subscribe
- 102
- Subscribe
- Subscribe
- Subscribe
- SPE5E217V3135
- 05 Jan 2017
- Subscribe
- 38
- Subscribe
- Subscribe
- Subscribe
- SPM5E213M3696
- 20 May 2013
- Subscribe
- 115
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-327-9690 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: