Premium Information is available for this item - Upgrade for $1 a day
5305-01-317-5403
Machine Screw
5305013175403 013175403 MS51959-13 FF-S-92
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD. View more Machine Screw
November 2023
11
Marketplace 5305-01-317-5403
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5305-01-317-5403 5+ Documents (More...)
/fsg-53/fsc-5305/us 5305-00-404-1380 Machine Screw 5305004041380 004041380 MS51959-13 SCREW,MACHINE
/fsg-53/fsc-5305/us 5305-01-317-5403 Machine Screw 5305013175403 013175403 MS51959-13 SCREW,MACHINE
MS51959-13 SCREW,MACHINE 860 EA NS Request Quotation Subscribe to View Vendor Details...
MS51959-13 SCREW,MACHINE 40 EA NS Request Quotation Subscribe to View Vendor Details...
MS51959-13 SCREW,MACHINE 860 EA NS Request Quotation Subscribe to View Vendor Details...
MS51959-13 SCREW,MACHINE 40 EA NS Request Quotation Subscribe to View Vendor Details...
MS51959-13B SCREW,MACHINE 100 EA NS Request Quotation FF-S-92 SCREW,MACHINE 400 EA NS Request Quotation
FF-S-92 SCREW,MACHINE 3512 EA NS Request Quotation FFS92 SCREW,MACHINE 230 EA NS Request Quotation Subscribe
MS51959-13 SCREW,MACHINE 860 EA NS Request Quotation Subscribe to View Vendor Details...
MS51959-13 SCREW,MACHINE 40 EA NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5305-01-317-5403
5305-01-317-5403 is a Machine Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-317-5403
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-317-5403
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKEHD
- Brazil (YA01)
- Effective Date:
- 1 Jul 2001
- Australia (ZA01)
- Effective Date:
- 1 Mar 2013
- Republic of Korea (ZH01)
- Effective Date:
- 1 Nov 2002
- Italy (ZR01)
- Effective Date:
- 1 Dec 2007
Approved Sources 5305-01-317-5403
- Part Number
- Manufacturer
- Status
- MS51959-13
- Manufacturer
- 96906 - Military Standards (Active)
- Related Standard
- Related Standard
- FF-S-92
- 81348 - Federal Specifications (Active)
- Incomplete Standard
- Incomplete Standard
Datasheet 5305-01-317-5403
- Characteristic
- Specifications
- FIIG
- Specifications
- A500D0
- Countersink Angle [CRSQ]
- 80.0 Degrees Minimum And 82.0 Degrees Maximum
- Departure From Cited Document [ZZZW]
- Asdifferentiated By Head Style
- Fastener Length [AASB]
- 0.219 Inches Minimum And 0.250 Inches Maximum
- Head Height [AASU]
- 0.048 Inches Minimum And 0.059 Inches Maximum
- Head Diameter [AASL]
- 0.244 Inches Minimum And 0.279 Inches Maximum
- Head Style [AASK]
- Flat Countersunk Undercut
- Minimum Tensile Strength [CQBC]
- 80000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.112 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 3 Type And 2C Style
- Internal Drive Style [ABQZ]
- Cross Recess Type 1
- Screw Material [CYAU]
- Steel Comp 301 Or Steel Comp 302 Or Steel Comp 302B Or Steel Comp 303 Or Steel Comp 303Se Or Steel Comp 304 Or Steel Comp 304L Or Steel Comp 305 Or Steel Comp 308 Or Steel Comp 309 Or Steel Comp 309S Or Steel Comp 310 Or Steel Comp 310S Or Steel Comp 314 Or Steel Comp 316 Or Steel Comp 316L Or Steel Comp 317 Or Steel Comp 321 Or Steel Comp 347 Or Steel Comp 348 Or Steel Comp 384 Or Steel Comp 385
- Screw Surface Treatment [CYBA]
- Passivate
- Screw Surface Treatment Document And Classification [CYBE]
- Qq-P-35 Fed Spec Single Treatment Response
- Thread Quantity Per Inch [CMLP]
- 40
- Thread Series Designator [THSD]
- Unc
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.110 Inches Minimum And 0.202 Inches Maximum
- Thread Class [AAJD]
- 2A
Weapon Systems (WSDC) 5305-01-317-5403
DLA Procurement Analysis 5305-01-317-5403
- Last Stock Position:
- 1967 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-317-5403
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-317-5403
Freight Information 5305-01-317-5403
5305-01-317-5403 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-317-5403 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-317-5403 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-317-5403 is not classified as a special type of cargo when transported by water. 5305-01-317-5403 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-317-5403
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- --
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 100
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-317-5403 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: