Premium Information is available for this item - Upgrade for $1 a day
5305-01-245-4071
Close Tolerance Screw
5305012454071 012454071 NAS4503-14
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
January 2023
5
Marketplace 5305-01-245-4071
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-245-4071 1+ Documents (More...)
Close Tolerance Screw 5305012454071 012454071 5305-01-245-4071 5305012454071 012454071 is a screw
Restrictions 5305-01-245-4071
5305-01-245-4071 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-245-4071
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-245-4071
- France (ZF01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-245-4071
- Part Number
- Manufacturer
- Status
- NAS4503-14
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-01-245-4071
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.183 Inches Minimum And 1.213 Inches Maximum
- Grip Diameter [AAUR]
- 0.1891 Inches Minimum And 0.1897 Inches Maximum
- Grip Length [ANEE]
- 0.865 Inches Minimum And 0.885 Inches Maximum
- Head Diameter [AASL]
- 0.336 Inches Minimum And 0.381 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Corrosion Resisting Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Tri-Wing Recess
- Material Document And Classification [MDCL]
- Ams 5731 Assn Std Single Material Response Overall Or Ams 5737 Assn Std Single Material Response Overall
- Single Shear Strength [AAWU]
- 95000 Pounds Per Square Inch
- Thread Series Designator [THSD]
- Unjf
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type Ii,Class 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.0323 Inches Nominal
- Thread Class [AAJD]
- 3A
- Thread Quantity Per Inch [CMLP]
- 32
NATO Stock Numbers Related to 5305-01-245-4071
Freight Information 5305-01-245-4071
5305-01-245-4071 has freight characteristics managed by France.. 5305-01-245-4071 has a variance between NMFC and UFC when transported by rail and the description should be consulted.