Premium Information is available for this item - Upgrade for $1 a day
5305-01-240-1278
Close Tolerance Screw
5305012401278 012401278 H044-3-11 V044-3-11 VT1693-3-11 PBF1165-3-11 121557-3-A C7984-3-11 AIC984-3-11 C7984
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
15
Marketplace 5305-01-240-1278
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-240-1278 5+ Documents (More...)
TOLERANCE 40 EA NS Request Quotation C7984-5-11 SCREW,CLOSE TOLERANCE 136 EA C7984-5-13 SCREW,CLOSE
C7984-5-11 SCREW,CLOSE TOLERANCE 136 EA C7984-5-13 SCREW,CLOSE Request Quotation C7984-3-7 SCREW,CLOSE
C7984-4-4R BOLT,SHEAR 3884 EA NS Request Quotation Updated Every Day 5306-01-480-3257 RQST NE Updated
C7984-4-4R BOLT,SHEAR 3884 EA NS Request Quotation Updated Every Day 5306-01-480-3257 RQST NE Updated
C7984-3-7 SCREW,CLOSE TOLERANCE 1115 EA NS Request Quotation C7984-4-10 SCREW,CLOSE TOLERANCE 120 EA
C7984-4-10 SCREW,CLOSE TOLERANCE 10 EA NS Request Quotation C7984-4-10 SCREW,CLOSE TOLERANCE 10 EA NS
TOLERANCE 136 EA C7984-5-13 SCREW,CLOSE Request Quotation C7984-3-7 SCREW,CLOSE TOLERANCE 1115 https
-5-11 SCREW,CLOSE TOLERANCE 136 EA C7984 TOLERANCE 40 EA NS Request Quotation C7984-5-11 SCREW, CLOSE
-5-2 AIC984-5-2P C7984-5-2P A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of
-5-2 06725 - Sps Technologies, Llc (Active) Secondary Buy RNCC 5 RNVC 2 DAC 1 C7984-5-2 06950 - Howmet
Restrictions 5305-01-240-1278
5305-01-240-1278 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-240-1278
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-240-1278
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- Poland (WP01)
- Effective Date:
- 1 Jun 2007
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Jan 1997
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 May 2008
Approved Sources 5305-01-240-1278
- Part Number
- Manufacturer
- Status
- H044-3-11
- Manufacturer
- 17446 - Huck International, Inc (Active)
- Primary Buy
- Primary Buy
- V044-3-11
- 17446 - Huck International, Inc (Active)
- Primary Buy
- Primary Buy
- VT1693-3-11
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- PBF1165-3-11
- 27624 - Sps Technologies Llc (Active)
- Primary Buy
- Primary Buy
- 121557-3-A
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- 121557-3-A
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- C7984-3-11
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- V044-3-11
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- H044-3-11
- 97828 - Simonetta Bros (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- VT1693-3-11
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- AIC984-3-11
- 06725 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- C7984-3-11
- 81755 - Lockheed Martin Corporation (Active)
- Vendor Drawing
- Vendor Drawing
- C7984
- 81755 - Lockheed Martin Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 5305-01-240-1278
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 0.996 Inches Minimum And 1.026 Inches Maximum
- Grip Diameter [AAUR]
- 0.1885 Inches Minimum And 0.1895 Inches Maximum
- Grip Length [ANEE]
- 0.678 Inches Minimum And 0.698 Inches Maximum
- Hardness Rating [CQFM]
- 46.0 Rockwell C Minimum Overall And 49.0 Rockwell C Maximum Overall
- Head Diameter [AASL]
- 0.325 Inches Minimum And 0.385 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Comp H11 Overall
- Minimum Tensile Strength [CQBC]
- 220000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Offset Cruciform (Torque Set)
- Material Document And Classification [MDCL]
- Ams 6487 Assn Std Single Material Response Overall
- Thread Series Designator [THSD]
- Unf
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Nas 672 Assn Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.298 Inches Minimum And 0.348 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5305-01-240-1278
DLA Procurement Analysis 5305-01-240-1278
- Last Stock Position:
- 111 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-240-1278
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 5305-01-240-1278
Freight Information 5305-01-240-1278
5305-01-240-1278 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-240-1278 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-240-1278 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-240-1278 is not classified as a special type of cargo when transported by water. 5305-01-240-1278 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-240-1278
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- Bags made of material conforming to MIL-P-130, MIL-DTL-17667, MIL-PRF-121, or any material authorized by MIL-DTL-117. Closure may be by staples, tape, adhesive or heat seal
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-240-1278 10 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A522P8141
- 07 Jul 2022
- Subscribe
- 78
- Subscribe
- Subscribe
- Subscribe
- SPE4A522P0554
- 14 Oct 2021
- Subscribe
- 45
- Subscribe
- Subscribe
- Subscribe
- SPE4A521P7048
- 13 Jul 2021
- Subscribe
- 41
- Subscribe
- Subscribe
- Subscribe
- SPE4A621V033D
- 19 Feb 2021
- Subscribe
- 62
- Subscribe
- Subscribe
- Subscribe
- SPE5E218V013H
- 13 Aug 2018
- Subscribe
- 42
- Subscribe
- Subscribe
- Subscribe
- SPE5E218V2989
- 08 Jan 2018
- Subscribe
- 14
- Subscribe
- Subscribe
- Subscribe
- SPE5E218V2577
- 21 Dec 2017
- Subscribe
- 14
- Subscribe
- Subscribe
- Subscribe
- SPE5E218V1181
- 06 Nov 2017
- Subscribe
- 35
- Subscribe
- Subscribe
- Subscribe
- SPE5E217VB511
- 28 Sep 2017
- Subscribe
- 24
- Subscribe
- Subscribe
- Subscribe
- SPE5E216M0953
- 08 Mar 2016
- Subscribe
- 110
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-240-1278 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: