Premium Information is available for this item - Upgrade for $1 a day
5305-01-216-1340
Close Tolerance Screw
5305012161340 012161340 HT4075V4-8-20 3M0134V4-9-20 3M1034V4-8-20 3M1034V4-9-20 11839V4-8-20
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
May 2023
17
Marketplace 5305-01-216-1340
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-216-1340 4+ Documents (More...)
(Identification) 1/2 NSN 5305-01-216-1340 (Identification) 2/2 - - 1.
BUY NE FedMall Updated Every Day 5305-01-216-1340 RQST NE Updated Every Day 5305-01-216-1340 RQST Updated
a Quotation from participating marketplace vendors Request Subscribe to View Vendor Details... 3M1034V4-9-20
Updated Every Day 5305-01-249-5841 RQST Updated https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-216-1340
Close Tolerance Screw 5305012161340 012161340 NE FedMall Updated Every Day 5305-01-216-1340 RQST
NE Updated Every Day 5305-01-216-1340 RQST Updated Every Day 5305-01-216-1340 RQST NE Related Documents
Close Tolerance Screw 5305012161340 012161340 Restrictions Approved Sources Datasheet Management
Restrictions 5305-01-216-1340
5305-01-216-1340 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-216-1340
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-216-1340
- National Security Agency (DGX1)
- Effective Date:
- 1 Dec 2013
- US Navy (N9BZ)
- Effective Date:
- 1 Mar 2014
- Supplementary Collaborators:
- HDKEHX
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-216-1340
- Part Number
- Manufacturer
- Status
- 3M0134V4-9-20
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- 3M1034V4-8-20
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M1034V4-9-20
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- 3M1034V4-9-20
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 11839V4-8-20
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- 3M1034V4-9-20
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- 3M1034V4-9-20
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- HT4075V4-8-20
- 80539 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4075V4-8-20
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4075V4-8-20
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-216-1340
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 0.954 Inches Minimum And 0.984 Inches Maximum
- Grip Diameter [AAUR]
- 0.2490 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Head Diameter [AASL]
- 0.497 Inches Minimum And 0.507 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Titanium Alloy Uns R56400 Overall
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams4928 Assn Std Single Material Response Or Ams4967 Assn Std Single Material Response Overall
- Special Features [FEAT]
- Thd Hole In Top Of Head 0.138-32 Unjc-3B Thd,Hole 0.300 In. Min. 0.345 In. Max Dp,Counterbore 0.145 In. Min. 0.150 In. Max Dia; Injection Port 0.120 In. Lg,0.060 In. Wide In Unthd Shank; Distance From Top Of Head To Beginning Of Injection Port 0.200 In.
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.444 Inches Minimum And 0.494 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5305-01-216-1340
DLA Procurement Analysis 5305-01-216-1340
Management Data 5305-01-216-1340
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5305-01-216-1340
Freight Information 5305-01-216-1340
5305-01-216-1340 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 136500. A Sub NMFC of Z. It has a NMFC Description of METAL NOI/METAL ALLOYS NOI. 5305-01-216-1340 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 68455 which rates the freight between FCL and LCL. 5305-01-216-1340 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-216-1340 is not classified as a special type of cargo when transported by water. 5305-01-216-1340 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-216-1340
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-216-1340 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- G
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: