Premium Information is available for this item - Upgrade for $1 a day
5305-01-140-7285
Close Tolerance Screw
5305011407285 011407285 ST3M430V3-14D HT271-3-14 110179-3-14 110179-3-12 HT8137-3-14 BM33024V3-14 10115414
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
21
Marketplace 5305-01-140-7285
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-140-7285 4+ Documents (More...)
(Identification) 1/2 NSN 5305-01-140-7285 (Identification) 2/2 - - 1.
ST3M430V3-14D SCREW,CLOSE TOLERANCE 1 EA NS Request Quotation Updated Every Day 5305-01-140-7285 RQST
Close Tolerance Screw 5305011407285 011407285 Account Upgrade 5305-01-140-7285Close Tolerance Screw5305011407285
011407285 ST3M430V3-14D HT271-3-14 110179 -3-14 110179-3-12 HT8137-3-14 BM33024V3-14 10115414 A SCREW
//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-298-8192 Thermal Resistor 5905012988192012988192 10115414
//www.nsnlookup.com /fsg-59/fsc-5905/us 5905-01-399-2198 Thermal Resistor 5905013992198013992198 10115414
Restrictions 5305-01-140-7285
5305-01-140-7285 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-140-7285
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-140-7285
- US Air Force (FXGI)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Aug 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- KE
- Finland (WF01)
- Effective Date:
- 1 May 2009
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Australia (ZA01)
- Effective Date:
- 1 Jun 1996
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-140-7285
- Part Number
- Manufacturer
- Status
- ST3M430V3-14D
- Manufacturer
- 76301 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- HT271-3-14
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- HT271-3-14
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- 110179-3-14
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 110179-3-12
- K5673 - Sps Technologies Ltd, Tj Brooks (Active)
- Secondary Buy
- Secondary Buy
- HT8137-3-14
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M430V3-14D
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- BM33024V3-14
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- 10115414
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
- HT8137-3-14
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Advisory Reference
- Advisory Reference
- BM33024V3-14
- 17446 - Huck International, Inc (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-140-7285
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.265 Inches Minimum And 1.312 Inches Maximum
- Grip Diameter [AAUR]
- 0.1890 Inches Minimum And 0.1895 Inches Maximum
- Grip Length [ANEE]
- 0.865 Inches Minimum And 0.885 Inches Maximum
- Head Height [AASU]
- 0.044 Inches Minimum And 0.046 Inches Maximum
- Head Diameter [AASL]
- 0.350 Inches Minimum And 0.381 Inches Maximum
- Head Style [AASK]
- Flat Countersunk Undercut
- Material [MATT]
- Titanium Alloy Overall
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Material Document And Classification [MDCL]
- Ams 4967 Assn Std Single Material Response Overall
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.380 Inches Minimum And 0.447 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
Weapon Systems (WSDC) 5305-01-140-7285
DLA Procurement Analysis 5305-01-140-7285
- Last Stock Position:
- 10 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-140-7285
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-140-7285
Freight Information 5305-01-140-7285
5305-01-140-7285 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 136500. A Sub NMFC of Z. It has a NMFC Description of METAL NOI/METAL ALLOYS NOI. 5305-01-140-7285 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 68455 which rates the freight between FCL and LCL. 5305-01-140-7285 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-140-7285 is not classified as a special type of cargo when transported by water. 5305-01-140-7285 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-140-7285
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-140-7285 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: