Premium Information is available for this item - Upgrade for $1 a day
5305-01-129-6941
Close Tolerance Screw
5305011296941 011296941 3036AS190-5L12 HT4054-5-12A ST3M730-5L12 ST3M730-5-12 HT4054-5-12 10115209
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
22
Marketplace 5305-01-129-6941
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-129-6941 3+ Documents (More...)
ST3M730-5-12 SCREW,CLOSE TOLERANCE 3 EA NS Request Quotation Subscribe to View Vendor Details... 3036AS190
Every Day 5305-01-129-6941 RQST Updated Every Day 5305-01-129-6941 RQST NE Related Documents 5305-01
Close Tolerance Screw 5305011296941 011296941 Upgrade your Account Upgrade 5305-01-129-6941Close
Tolerance Screw5305011296941 011296941 3036AS190-5L12 HT4054-5-12A ST3M730-5L12 ST3M730-5-12 HT4054-
Agency (DS)IZDiscontinued-Use 5962-01-286-1600 https//www.nsnlookup.com /fsg-53/fsc-5305/us 5305-01-129-6941
Close Tolerance Screw 5305011296941 011296941 5L12HT4054-5-12AST3M730-5L12ST3M730-5-12HT4054- https
Restrictions 5305-01-129-6941
5305-01-129-6941 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-129-6941
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-129-6941
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Finland (WF01)
- Effective Date:
- 1 Apr 2009
- Spain (YB01)
- Effective Date:
- 1 Apr 1991
- Malaysia (YW01)
- Effective Date:
- 1 Aug 1997
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-129-6941
- Part Number
- Manufacturer
- Status
- 3036AS190-5L12
- Manufacturer
- 30003 - Naval Air Systems Command Managed (Active)
- Incomplete Reference
- Incomplete Reference
- HT4054-5-12A
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- ST3M730-5L12
- K5673 - Sps Technologies Ltd, Tj Brooks (Active)
- Secondary Buy
- Secondary Buy
- HT4054-5-12A
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HT4054-5-12A
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- ST3M730-5-12
- 76301 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12
- 80539 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12A
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12A
- 17446 - Huck International, Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M730-5L12
- 60516 - West Coast Aerospace, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M730-5L12
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12A
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12A
- L4528 - Lisi Aerospace Canada Corp (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4054-5-12
- 73197 - Hi-Shear Corporation (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M730-5L12
- 76301 - The Boeing Company (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 10115209
- A486G - Nimikkeistokeskus Ncb Finland (Active)
- NATO Reference
- NATO Reference
Datasheet 5305-01-129-6941
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 1.204 Inches Minimum And 1.234 Inches Maximum
- Grip Diameter [AAUR]
- 0.3110 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 0.740 Inches Minimum And 0.760 Inches Maximum
- Hardness Rating [CQFM]
- 39.0 Rockwell C Minimum Overall And 43.0 Rockwell C Maximum Overall
- Head Diameter [AASL]
- 0.578 Inches Minimum And 0.634 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material Document And Classification [MDCL]
- Mil-S-6049 Mil Spec Single Material Response Overall
- Material [MATT]
- Steel Comp 8740 Overall
- Minimum Tensile Strength [CQBC]
- 180000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Mil-C-83488 Type 2 Class 3 Mil Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Aluminum Overall And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.444 Inches Minimum And 0.494 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 24
Weapon Systems (WSDC) 5305-01-129-6941
DLA Procurement Analysis 5305-01-129-6941
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-129-6941
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 5305-01-129-6941
Freight Information 5305-01-129-6941
5305-01-129-6941 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-129-6941 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-129-6941 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-129-6941 is not classified as a special type of cargo when transported by water. 5305-01-129-6941 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-129-6941
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-129-6941 1 Records
Contracting Technical Data File (CTDF) 5305-01-129-6941 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: