Premium Information is available for this item - Upgrade for $1 a day
5305-01-092-0202
Machine Screw
5305010920202 010920202 NAS1101-3-68
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD. View more Machine Screw
May 2023
21
Marketplace 5305-01-092-0202
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-092-0202 5+ Documents (More...)
Restrictions 5305-01-092-0202
5305-01-092-0202 is a Machine Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5305-01-092-0202
- US Air Force (FXGI)
- Effective Date:
- 1 Mar 2006
- Former MOE Rule:
- FXKZ
- Belgium (ZB01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-092-0202
- Part Number
- Manufacturer
- Status
- NAS1101-3-68
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1101-3-68
- 53606 - Plastic And Metal Products (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 58998 - Fastener Innovation Technology, Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 06725 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 07851 - Nor-Cal Supply Co.Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 27624 - Sps Technologies Llc (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 30485 - Qualified Air Components Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 30889 - Eriks Southwest Inc (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- NAS1101-3-68
- 08547 - Wallace R G Co Div Of Ducommun Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1101-3-68
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1101-3-68
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-092-0202
- Characteristic
- Specifications
- FIIG
- Specifications
- A500D0
- Fastener Length [AASB]
- 4.156 Inches Minimum And 4.250 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum And 40.0 Rockwell C Maximum
- Head Height [AASU]
- 0.103 Inches Minimum And 0.118 Inches Maximum
- Head Diameter [AASL]
- 0.306 Inches Minimum And 0.313 Inches Maximum
- Head Hole Configuration Style [CYBG]
- Round
- Head Style [AASK]
- Flat Chamfer
- Hole Diameter [AAUB]
- 0.034 Inches Minimum And 0.042 Inches Maximum
- Hole Quantity [ASXK]
- 1
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.190 Inches
- Internal Drive Style [ABQZ]
- Torque Set
- Screw Material [CYAU]
- Steel Comp E4340 Or Steel Comp 4140 Or Steel Comp 8740 Or Steel Comp 8735 Or Steel Comp 6150
- Screw Surface Treatment Document And Classification [CYBE]
- Qq-P-416 Ty 2 Class 2 Fed Spec Single Treatment Response
- Screw Surface Treatment [CYBA]
- Cadmium And Chromate
- Specification/Standard Data [ZZZK]
- 80205-Nas1101 Professional/Industrial Association Standard
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 2.406 Inches Minimum And 4.250 Inches Maximum
- Thread Series Designator [THSD]
- Unjf
- Thread Quantity Per Inch [CMLP]
- 32
DLA Procurement Analysis 5305-01-092-0202
Management Data 5305-01-092-0202
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-092-0202
Freight Information 5305-01-092-0202
5305-01-092-0202 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-092-0202 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-092-0202 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-092-0202 is not classified as a special type of cargo when transported by water. 5305-01-092-0202 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-092-0202
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- 10
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-092-0202 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: