Premium Information is available for this item - Upgrade for $1 a day
5305-01-090-6340
Panel Screw Assembly
5305010906340 010906340 CA2104-2HS BACF34L4B-2HS 334634P01
A headed, threaded fastening device over which may be assembled; (1) a stand-off; (2) a flanged bushing with washer(s) and/or a shouldered bushing without a flange, or it may have an internally threaded sleeve that is an integral part of the screw; a washer and an externally thread self-locking bushing that is driven by an inserted driver. Attached to panel by threaded bushing or by flaring end of stand-off, or bushing. Used in conjunction with a speed nut, nut plate, or driven into a threaded hole in the item that the panel is fastened to. May be spring loaded. View more Panel Screw Assembly
July 2023
20
Marketplace 5305-01-090-6340
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-090-6340 1+ Documents (More...)
Restrictions 5305-01-090-6340
5305-01-090-6340 is a Panel Screw Assembly that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-090-6340
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-090-6340
- US Army (A919)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- A187
- Supplementary Receivers:
- BD
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Marine Corps (MC47)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- MC10
- US Navy (N9BZ)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTKE
- Singapore (YJ01)
- Effective Date:
- 1 Jul 2013
- Malaysia (YW01)
- Effective Date:
- 1 Apr 2007
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
- Italy (ZR01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-090-6340
- Part Number
- Manufacturer
- Status
- CA2104-2HS
- Manufacturer
- 29372 - Howmet Global Fastening Systems Inc. (Active)
- Primary Buy
- Primary Buy
- CA2104-2HS
- D0680 - Howmet Fastening Systems Kelkheim (Active)
- Secondary Buy
- Secondary Buy
- 334634P01
- 58163 - Meggitt (North Hollywood), Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 334634P01
- 33654 - Howden Fluid Systems (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- BACF34L4B-2HS
- 81205 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5305-01-090-6340
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 0.727 Inches Minimum And 0.747 Inches Maximum
- Head Diameter [AASL]
- 0.394 Inches Minimum And 0.404 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material Document And Classification [MDCL]
- Mil-S-5626 Mil Spec 1St Material Response Overall Or Mil-S-6049 Mil Spec 2Nd Material Response Overall
- Material [MATT]
- Steel Comp 4140 Overall Or Steel Comp 8740 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Special Features [FEAT]
- Three 0.040 In.Wide By 0.029 In. Deep Splines In Shank And 120 Degrees Apart,Thread To Be Double Lead
- Surface Treatment Document And Classification [STDC]
- Qq-P-416 Ty2 Cl2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.437 Inches Minimum And 0.597 Inches Maximum
- Thread Series Designator [THSD]
- Unf
- Thread Quantity Per Inch [CMLP]
- 28
Weapon Systems (WSDC) 5305-01-090-6340
DLA Procurement Analysis 5305-01-090-6340
- Last Stock Position:
- 494 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-090-6340
- Effective Date
- Organization
- Unit of Issue
- Unit Price
- Qty Unit Pack
- Unit of Issue
- Oct 2022
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 4
- EA
- Jan 2022
- Department of the Air Force (DF)
- EA
- Subscribe
- 4
- EA
- Oct 2021
- US Marine Corps (DM)
- EA
- Subscribe
- 4
- EA
- May 2021
- Defense Logistics Agency (DS)
- EA
- Subscribe
- 4
- EA
- Oct 2019
- Department of the Air Force (DF)
- EA
- Subscribe
- EA
Army
- Materiel Category and Inventory Manager:
- T
- Industrial Supplies (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Marine Corps
- Stores Account:
- 1
- Stock Fund Account Item
- Combat Essentiality:
- 5
- Critical Repair Part to a Combat Essential End Item
- Echelon Management:
- B2
- Operational Test:
- No Special Procedures
NATO Stock Numbers Related to 5305-01-090-6340
Freight Information 5305-01-090-6340
5305-01-090-6340 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-090-6340 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-090-6340 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-090-6340 is not classified as a special type of cargo when transported by water. 5305-01-090-6340 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-090-6340
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 4
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-01-090-6340 10 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE4A624FAC12
- 30 Oct 2023
- Subscribe
- 908
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FB3QC
- 10 Jul 2023
- Subscribe
- 3899
- Subscribe
- Subscribe
- Subscribe
- SPE4A623FB3QC
- 10 Jul 2023
- Subscribe
- 3899
- Subscribe
- Subscribe
- Subscribe
- SPE4A622PB743
- 07 Feb 2022
- Subscribe
- 2316
- Subscribe
- Subscribe
- Subscribe
- SPM5EY13D03580680
- 17 Jul 2017
- Subscribe
- 489
- Subscribe
- Subscribe
- Subscribe
- SPM5EY13D0358062101
- 26 Apr 2017
- Subscribe
- 364
- Subscribe
- Subscribe
- Subscribe
- SPM5EY13D03580548
- 04 Jan 2017
- Subscribe
- 877
- Subscribe
- Subscribe
- Subscribe
- SPM5EY13D03580510
- 16 Nov 2016
- Subscribe
- 753
- Subscribe
- Subscribe
- Subscribe
- SPM5E213M3695
- 20 May 2013
- Subscribe
- 2500
- Subscribe
- Subscribe
- Subscribe
- SPM5E213V2351
- 21 Mar 2013
- Subscribe
- 3800
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 5305-01-090-6340 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: