Premium Information is available for this item - Upgrade for $1 a day
5305-01-057-0341
Close Tolerance Screw
5305010570341 010570341 BACB30LP5P3
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
May 2023
6
Marketplace 5305-01-057-0341
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-057-0341 1+ Documents (More...)
BUY NE FedMall Updated Every Day 5305-01-057-0341 RQST NE Updated Every Day 5305-01-057-0341 RQST
Updated Every Day 5305-01-057-0341 RQST NE Related Documents 5305-01-057-0341 1+ Documents ( More...
Restrictions 5305-01-057-0341
5305-01-057-0341 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-057-0341
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-057-0341
- US Air Force (FXGI)
- Effective Date:
- 1 Jan 2007
Approved Sources 5305-01-057-0341
- Part Number
- Manufacturer
- Status
- BACB30LP5P3
- Manufacturer
- 81205 - The Boeing Company (Active)
- Primary Buy
- Primary Buy
- BACB30LP5P3
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- BACB30LP5P3
- 17446 - Huck International, Inc (Active)
- Secondary Buy
- Secondary Buy
- BACB30LP5P3
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-057-0341
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Fastener Length [AASB]
- 0.632 Inches Minimum And 0.682 Inches Maximum
- Grip Diameter [AAUR]
- 0.3110 Inches Minimum And 0.3120 Inches Maximum
- Grip Length [ANEE]
- 0.178 Inches Minimum And 0.198 Inches Maximum
- Head Diameter [AASL]
- 0.574 Inches Minimum And 0.637 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Iron Alloy 660 Overall
- Nominal Thread Diameter [AHYM]
- 0.312 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Locking Feature [AAUM]
- Patch Threads
- Surface Finish [CSYM]
- 32.0 Microinches Bearing Surface Of Head
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.434 Inches Minimum And 0.504 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unjf
DLA Procurement Analysis 5305-01-057-0341
Management Data 5305-01-057-0341
Similar Supply Items to 5305-01-057-0341
Freight Information 5305-01-057-0341
5305-01-057-0341 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-057-0341 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-057-0341 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-057-0341 is not classified as a special type of cargo when transported by water. 5305-01-057-0341 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-057-0341 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- K
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: