Premium Information is available for this item - Upgrade for $1 a day
5305-01-048-6583
Machine Screw
5305010486583 010486583 P342-1359-010
An externally threaded fastener whose threaded portion is of one nominal diameter, No 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 10 (0.190 in./5 mm). No. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD. View more Machine Screw
May 2023
16
Marketplace 5305-01-048-6583
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-048-6583 1+ Documents (More...)
Restrictions 5305-01-048-6583
5305-01-048-6583 is a Machine Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5305-01-048-6583
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-048-6583
- US Air Force (FGGI)
- Effective Date:
- 1 Aug 2008
Approved Sources 5305-01-048-6583
- Part Number
- Manufacturer
- Status
- P342-1359-010
- Manufacturer
- 77250 - Allied Products Corp Pheoll Mfg Co (Obsolete)
- Original Design
- Original Design
Datasheet 5305-01-048-6583
- Characteristic
- Specifications
- FIIG
- Specifications
- A500D0
- Countersink Angle [CRSQ]
- 82.0 Degrees Nominal
- Fastener Length [AASB]
- 0.531 Inches Minimum And 0.562 Inches Maximum
- Head Diameter [AASL]
- 0.147 Inches Minimum And 0.172 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Minimum Tensile Strength [CQBC]
- 80000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.086 Inches
- Internal Drive Style [ABQZ]
- Cross Recess Type 1
- Screw Material [CYAU]
- Steel Comp 301 Or Steel Comp 302 Or Steel Comp 303 Or Steel Comp 303Se Or Steel Comp 304 Or Steel Comp 304L Or Steel Comp 305 Or Steel Comp 308 Or Steel Comp 309 Or Steel Comp 310 Or Steel Comp 310S Or Steel Comp 314 Or Steel Comp 316 Or Steel Comp 316L Or Steel Comp 317 Or Steel Comp 321 Or Steel Comp 323 Or Steel Comp 324 Or Steel Comp 347 Or Steel Comp 348 Or Steel Comp 385
- Screw Surface Treatment [CYBA]
- Passivate
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.444 Inches Minimum And 0.511 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 56
- Thread Series Designator [THSD]
- Unc
Weapon Systems (WSDC) 5305-01-048-6583
DLA Procurement Analysis 5305-01-048-6583
Management Data 5305-01-048-6583
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 5305-01-048-6583
Freight Information 5305-01-048-6583
5305-01-048-6583 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 096640. A Sub NMFC of X. It has a NMFC Description of SCREWS, IRON OR STEEL. 5305-01-048-6583 is rated as class 70 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 50600 which rates the freight between FCL and LCL. 5305-01-048-6583 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-048-6583 is not classified as a special type of cargo when transported by water. 5305-01-048-6583 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 5305-01-048-6583 October 2020
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: