Premium Information is available for this item - Upgrade for $1 a day
5305-01-019-0840
Close Tolerance Screw
5305010190840 010190840 ST3M680-6D35 HT4036-6D35
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
January 2023
16
Marketplace 5305-01-019-0840
Request a Quotation from participating marketplace vendors
Related Documents 5305-01-019-0840 4+ Documents (More...)
Close Tolerance Screw 5305010190840 010190840 5305-01-019-0840 5305010190840 010190840 is a screw
Close Tolerance Screw 5305010190840 010190840 5305-01-019-0840 5305010190840 010190840 is a screw
Close Tolerance Screw 5305010190840 010190840 5305-01-019-0840 5305010190840 010190840 is a screw
Close Tolerance Screw 5305010190840 010190840 5305-01-019-0840 5305010190840 010190840 is a screw
Restrictions 5305-01-019-0840
5305-01-019-0840 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-019-0840
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-019-0840
- Germany (ZG01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-019-0840
- Part Number
- Manufacturer
- Status
- ST3M680-6D35
- Manufacturer
- 76301 - The Boeing Company (Active)
- Source Control
- Source Control
- HT4036-6D35
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- HT4036-6D35
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- HT4036-6D35
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- HT4036-6D35
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- HT4036-6D35
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HT4036-6D35
- C4293 - Fairchild Fasteners Europe - Vsd (Active)
- Secondary Buy
- Secondary Buy
- HT4036-6D35
- R1120 - Satair A/S (Active)
- Secondary Buy
- Secondary Buy
- HT4036-6D35
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4036-6D35
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-01-019-0840
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- 2.574 Inches Minimum First Hole And 2.594 Inches Maximum First Hole
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Fastener Length [AASB]
- 2.689 Inches Minimum And 2.719 Inches Maximum
- Grip Diameter [AAUR]
- 0.3740 Inches Minimum And 0.3745 Inches Maximum
- Grip Length [ANEE]
- 2.178 Inches Minimum And 2.198 Inches Maximum
- Head Diameter [AASL]
- 0.752 Inches Minimum And 0.762 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material [MATT]
- Steel Corrosion Resisting Overall
- Nominal Thread Diameter [AHYM]
- 0.375 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Shank Unthreaded Hole Diameter [AAWB]
- 0.106 Inches Minimum First Hole And 0.111 Inches Maximum First Hole
- Surface Treatment [SFTT]
- Passivate Overall
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.516 Inches Nominal
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unjf
NATO Stock Numbers Related to 5305-01-019-0840
Freight Information 5305-01-019-0840
5305-01-019-0840 has freight characteristics managed by Germany.. 5305-01-019-0840 has a variance between NMFC and UFC when transported by rail and the description should be consulted.