Premium Information is available for this item - Upgrade for $1 a day
5305-01-004-4999
Hexagon Head Cap Screw
5305010044999 010044999 MS90725-186 FF-S-85 E103972 FIND NO 58 E108609 FIND 250
An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. Excludes BOLT,MACHINE; BOLT,EXTERNALLY RELIEVED BODY; BOLT,INTERNAL WRENCHING; and SCREW,CAP,SOCKET HEAD. View more Hexagon Head Cap Screw
August 2023
17
Marketplace 5305-01-004-4999
Request a Quotation from participating marketplace vendors
Updated Every Day Updated Every Day 
Updated Every Day Related Documents 5305-01-004-4999 5+ Documents (More...)
MS90725-186 SCREW,CAP,HEXAGON HEAD 250 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 79 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 258 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 79 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 258 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 79 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 258 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 79 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 258 EA NS Request Quotation Subscribe to View Vendor Details...
MS90725-186 SCREW,CAP,HEXAGON HEAD 79 EA NS Request Quotation Subscribe to View Vendor Details...
Restrictions 5305-01-004-4999
5305-01-004-4999 is a Hexagon Head Cap Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-01-004-4999
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-01-004-4999
- US Air Force (FXGI)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Jun 2005
- Former MOE Rule:
- N9ZD
- Supplementary Collaborators:
- GTHXHD
- Singapore (YJ01)
- Effective Date:
- 1 Nov 1999
- Australia (ZA01)
- Effective Date:
- 1 Apr 1991
- Canada (ZC01)
- Effective Date:
- 1 Apr 1991
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
- Germany (ZG01)
- Effective Date:
- 1 Feb 2005
- United Kingdom (ZK01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-01-004-4999
- Part Number
- Manufacturer
- Status
- MS90725-186
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Incomplete Reference
- Incomplete Reference
- FF-S-85
- 81348 - Federal Specifications Promulgated (Active)
- Incomplete Standard
- Incomplete Standard
- MS90725-186
- 96906 - Military Standards (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- E103972 FIND NO 58
- 3X894 - Control Flow, Inc. (Active)
- Advisory Reference
- Advisory Reference
- E108609 FIND 250
- 3X894 - Control Flow, Inc. (Active)
- Advisory Reference
- Advisory Reference
Datasheet 5305-01-004-4999
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Departure From Cited Designator [ZZZX]
- As Mod By Material Which Must Conform To Ships Parts Control Center Special Quality Control Provisions
- Fastener Length [AASB]
- 1.688 Inches Minimum And 1.750 Inches Maximum
- Hardness Rating [CQFM]
- 25.0 Rockwell C Minimum Overall And 34.0 Rockwell C Maximum Overall
- Head Height [AASU]
- 0.455 Inches Minimum And 0.483 Inches Maximum
- Head Style [AASK]
- Hexagon
- Material Document And Classification [MDCL]
- Sae Gr 5 Assn Std Single Material Response Overall
- Material [MATT]
- Steel Overall
- Minimum Tensile Strength [CQBC]
- 120000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.750 Inches
- Nondefinitive Spec/Std Data [ZZZT]
- 2 Type And 10P Style And 5 Grade
- Width Between Flats [AATB]
- 1.100 Inches Minimum And 1.125 Inches Maximum
- Special Test Features [SPCL]
- Special Quality Control Testing
- Surface Finish [CSYM]
- 63.0 Microinches Threads
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Ty 2 Cl 2 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall And Chromate Overall
- Test Data Document [TEST]
- 81349-Mil-P-23199 Specification (Includes Engineering Type Bulletins, Brochures,Etc., That Reflect Specification Type Data In Specification Format; Excludes Commercial Catalogs, Industry Directories, And Similar Trade Publications, Reflecting General Type Data On Certain Environmental And Performance Requirements And Test Conditions That Are Shown As "Typical", "Average", "Nominal", Etc.).
- Thread Class [AAJD]
- 2A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 1.438 Inches Minimum And 1.750 Inches Maximum
- Thread Series Designator [THSD]
- Unc
- Thread Quantity Per Inch [CMLP]
- 10
Weapon Systems (WSDC) 5305-01-004-4999
DLA Procurement Analysis 5305-01-004-4999
- Last Stock Position:
- 12 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-01-004-4999
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-01-004-4999
Freight Information 5305-01-004-4999
5305-01-004-4999 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-01-004-4999 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-01-004-4999 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-01-004-4999 is not classified as a special type of cargo when transported by water. 5305-01-004-4999 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-01-004-4999
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- Any bag or sack used by the vendor
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Contracting Technical Data File (CTDF) 5305-01-004-4999 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- S
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: