Premium Information is available for this item - Upgrade for $1 a day
5305-00-680-5429
Close Tolerance Screw
5305006805429 006805429 NAS1204-52
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
15
Marketplace 5305-00-680-5429
Request a Quotation from participating marketplace vendors
Related Documents 5305-00-680-5429 5+ Documents (More...)
Restrictions 5305-00-680-5429
5305-00-680-5429 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-00-680-5429
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-00-680-5429
- New Zealand (ZE01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-00-680-5429
- Part Number
- Manufacturer
- Status
- NAS1204-52
- Manufacturer
- 30889 - Eriks Southwest Inc (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- 50568 - Apcom Inc (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- 07851 - Nor-Cal Supply Co.Inc. (Active)
- Primary Buy
- Primary Buy
- NAS1204-52
- 56878 - Sps Technologies, Llc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1204-52
- 04348 - Lawrence Engineering And Supply Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1204-52
- 08938 - Air Industries Co Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1204-52
- 30902 - F And C Sales Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1204-52
- 71563 - Collins Engineering Corp (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- NAS1204-52
- 82172 - Durham Aircraft Service Inc (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 5305-00-680-5429
- Characteristic
- Specifications
- Countersink Angle [CRSQ]
- Specifications
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 3.551 Inches Minimum And 3.581 Inches Maximum
- Grip Diameter [AAUR]
- 0.2485 Inches Minimum And 0.2495 Inches Maximum
- Grip Length [ANEE]
- 3.240 Inches Minimum And 3.260 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Overall And 40.0 Rockwell C Maximum Overall
- Head Diameter [AASL]
- 0.449 Inches Minimum And 0.507 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec 1St Material Response Overall Or Mil-S-5626 Mil Spec 2Nd Material Response Overall Or Mil-S-6049 Mil Spec 3Rd Material Response Overall Or Mil-S-6098 Mil Spec 4Th Material Response Overall
- Material [MATT]
- Steel Comp E4340 Overall Or Steel Comp 4140 Overall Or Steel Comp 8740 Overall Or Steel Comp 8735 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.250 Inches
- Internal Drive Style [ABQZ]
- Cross Recess Type 1
- Specification/Standard Data [ZZZK]
- 80205-Nas1204 Professional/Industrial Association Standard
- Surface Treatment Document And Classification [STDC]
- Qq-P-416,Type 2,Class 3 Fed Spec Single Treatment Response Overall
- Surface Treatment [SFTT]
- Cadmium Overall
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.316 Inches Minimum
- Thread Quantity Per Inch [CMLP]
- 28
- Thread Series Designator [THSD]
- Unf
NATO Stock Numbers Related to 5305-00-680-5429
Freight Information 5305-00-680-5429
5305-00-680-5429 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-00-680-5429 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5305-00-680-5429 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-00-680-5429 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-00-680-5429 is not classified as a special type of cargo when transported by water. 5305-00-680-5429 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.