Premium Information is available for this item - Upgrade for $1 a day
5305-00-486-1154
Close Tolerance Screw
5305004861154 004861154 HT4028L7-8 11909V7L8-1 ST3M466V7L8-1
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
12
Marketplace 5305-00-486-1154
Request a Quotation from participating marketplace vendors
Related Documents 5305-00-486-1154 3+ Documents (More...)
Close Tolerance Screw 5305004861154 004861154 5305-00-486-1154 5305004861154 004861154 is a screw
Close Tolerance Screw 5305004861154 004861154 5305-00-486-1154 5305004861154 004861154 is a screw
Restrictions 5305-00-486-1154
5305-00-486-1154 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 5305-00-486-1154
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5305-00-486-1154
- US Air Force (FXGI)
- Effective Date:
- 1 Apr 2006
- Former MOE Rule:
- FXKZ
- US Navy (N9BZ)
- Effective Date:
- 1 Dec 2013
- Supplementary Collaborators:
- GG
Approved Sources 5305-00-486-1154
- Part Number
- Manufacturer
- Status
- ST3M466V7L8-1
- Manufacturer
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Primary Buy
- Primary Buy
- ST3M466V7L8-1
- 17446 - Huck International, Inc. (Active)
- Primary Buy
- Primary Buy
- ST3M466V7L8-1
- 56878 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- ST3M466V7L8-1
- 73197 - Hi-Shear Corporation (Active)
- Primary Buy
- Primary Buy
- ST3M466V7L8-1
- 80539 - Sps Technologies, Llc (Active)
- Primary Buy
- Primary Buy
- ST3M466V7L8-1
- L4528 - Lisi Aerospace Canada Corp (Active)
- Primary Buy
- Primary Buy
- ST3M466V7L8-1
- 007R1 - Twist Tite Mfg., Inc. (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- 06950 - Howmet Global Fastening Systems Inc (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- 17446 - Huck International, Inc. (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- 56878 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- 11909V7L8-1
- 59563 - Reid Products Inc. (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- K5673 - Sps Technologies Ltd, Tj Brooks (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- 80539 - Sps Technologies, Llc (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- 73197 - Hi-Shear Corporation (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- L4528 - Lisi Aerospace Canada Corp (Active)
- Secondary Buy
- Secondary Buy
- HT4028L7-8
- 92215 - Howmet Global Fastening Systems Inc (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- HT4028L7-8
- 97928 - Huck Intl Inc (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
- ST3M466V7L8-1
- 76301 - The Boeing Company (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 5305-00-486-1154
- Characteristic
- Specifications
- FIIG
- Specifications
- A003B0
- Countersink Angle [CRSQ]
- 100.0 Degrees Nominal
- Fastener Length [AASB]
- 1.141 Inches Minimum And 1.171 Inches Maximum
- Grip Diameter [AAUR]
- 0.4365 Inches Minimum And 0.4370 Inches Maximum
- Grip Length [ANEE]
- 0.490 Inches Minimum And 0.510 Inches Maximum
- Head Diameter [AASL]
- 0.662 Inches Minimum And 0.668 Inches Maximum
- Head Style [AASK]
- Oval Countersunk
- Material Document And Classification [MDCL]
- Nas621,Comp 6Al-4V Assn Std Single Material Response Overall Or Ams4928 Assn Std Single Material Response Overall Or Ams4967 Assn Std Single Material Response Overall
- Material [MATT]
- Titanium Alloy Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.438 Inches
- Internal Drive Style [ABQZ]
- High-Torque
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Surface Finish [CSYM]
- 32.0 Microinches Threads
- Thread Class [AAJD]
- 3A
- Thread Direction [AAJF]
- Right-Hand
- Thread Length [AASA]
- 0.631 Inches Minimum And 0.681 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 20
- Thread Series Designator [THSD]
- Unjf
Weapon Systems (WSDC) 5305-00-486-1154
DLA Procurement Analysis 5305-00-486-1154
- Last Stock Position:
- 2417 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 5305-00-486-1154
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- V
- The current standard price has been validated.
The item has been analyzed in conjunction with the Zero Overpricing Program and is in the accepted price range.
The item was procured under open competition and under the competitive arena the price is considered fair and reasonable.
ZOP or Standard price challenges are permissible but must be supported by adequate justification.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 5305-00-486-1154
Freight Information 5305-00-486-1154
5305-00-486-1154 has freight characteristics managed by the Southwestern Power Administration.It has a National Motor Freight Classification (NMFC) of 136500. A Sub NMFC of Z. It has a NMFC Description of METAL NOI/METAL ALLOYS NOI. 5305-00-486-1154 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 68455 which rates the freight between FCL and LCL. 5305-00-486-1154 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 576 for ocean manifesting and military sealift. 5305-00-486-1154 is not classified as a special type of cargo when transported by water. 5305-00-486-1154 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5305-00-486-1154
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Plated/Coated Item
- 2lb or less, one dimension 2" or less, other dimensions less than 24"
- Above 110G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- Special Requirements – see Specific Instructions or Drawings provided
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- Special Requirements – see Specific Instructions or Drawings provided
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
Procurement History 5305-00-486-1154 3 Records
Contracting Technical Data File (CTDF) 5305-00-486-1154 October 2020
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- L
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: