Premium Information is available for this item - Upgrade for $1 a day
5305-00-283-0440
Close Tolerance Screw
5305002830440 002830440 NAS336-30
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. View more Close Tolerance Screw
November 2023
6
Marketplace 5305-00-283-0440
Request a Quotation from participating marketplace vendors
Related Documents 5305-00-283-0440 1+ Documents (More...)
Restrictions 5305-00-283-0440
5305-00-283-0440 is a Close Tolerance Screw that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
End Users 5305-00-283-0440
- Singapore (YJ01)
- Effective Date:
- 1 Apr 1991
Approved Sources 5305-00-283-0440
- Part Number
- Manufacturer
- Status
- NAS336-30
- Manufacturer
- 80205 - National Aerospace Standards (Active)
- Primary Buy
- Primary Buy
Datasheet 5305-00-283-0440
- Characteristic
- Specifications
- Distance From Head Largest Bearing Surface To Shank Hole Center [CRZS]
- Specifications
- 2.866 Inches Minimum First Hole And 2.886 Inches Maximum First Hole
- Countersink Angle [CRSQ]
- 99.0 Degrees Minimum And 101.0 Degrees Maximum
- Fastener Length [AASB]
- 3.063 Inches Minimum And 3.110 Inches Maximum
- Grip Diameter [AAUR]
- 0.3737 Inches Minimum And 0.3742 Inches Maximum
- Grip Length [ANEE]
- 2.428 Inches Minimum And 2.448 Inches Maximum
- Hardness Rating [CQFM]
- 36.0 Rockwell C Minimum Overall And 40.0 Rockwell C Maximum Overall
- Head Diameter [AASL]
- 0.752 Inches Minimum And 0.762 Inches Maximum
- Head Style [AASK]
- Flat Countersunk
- Material Document And Classification [MDCL]
- Mil-S-5626 Mil Spec 1St Material Response Overall Or Mil-S-5000 Mil Spec 2Nd Material Response Overall Or Mil-S-8503 Mil Spec 3Rd Material Response Overall Or Mil-S-6098 Mil Spec 4Th Material Response Overall Or Mil-S-6049 Mil Spec 5Th Material Response Overall
- Material [MATT]
- Steel Comp 4140 Overall Or Steel Comp E4340 Overall Or Steel Comp 6150 Overall Or Steel Comp 8735 Overall Or Steel Comp 8740 Overall
- Minimum Tensile Strength [CQBC]
- 160000 Pounds Per Square Inch
- Nominal Thread Diameter [AHYM]
- 0.375 Inches
- Internal Drive Style [ABQZ]
- Hexagon
- Shank Unthreaded Hole Diameter [AAWB]
- 0.106 Inches Nominal First Hole
- Width Across Flats [ASDB]
- 0.220 Inches Minimum And 0.222 Inches Maximum
- Specification/Standard Data [ZZZK]
- 80205-Nas336 Professional/Industrial Association Standard
- Surface Finish [CSYM]
- 32.0 Microinches Grip
- Thread Direction [AAJF]
- Right-Hand
- Thread Class [AAJD]
- 3A
- Thread Length [AASA]
- 0.615 Inches Minimum And 0.682 Inches Maximum
- Thread Quantity Per Inch [CMLP]
- 24
- Thread Series Designator [THSD]
- Unf
NATO Stock Numbers Related to 5305-00-283-0440
Freight Information 5305-00-283-0440
5305-00-283-0440 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 093486. A Sub NMFC of Z. It has a NMFC Description of BOLTS,NUTS OR SCREWS, NOI (SUB 3). 5305-00-283-0440 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. 5305-00-283-0440 is rated as class 50 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 48950 which rates the freight between FCL and LCL. 5305-00-283-0440 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 713 for ocean manifesting and military sealift. 5305-00-283-0440 is not classified as a special type of cargo when transported by water. 5305-00-283-0440 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.