5305-99-765-4382

W/581/00/2 PART 19 W/581/00/2/19 001144307 SSN.07/W/581/00/2 SSN.07/W/581/00/2/19 SSN.07/W/581/00
/2 PART 19 001144307 ITEM 19 001144307/19 A metallic item, usually square or rectangular in cross section
Ministry Of Defence (Navy) Ships (Active) Incomplete Secondary Reference RNCC 5 RNVC 1 DAC 2 SSN.07/W/581/00/2

Here are instructions how to enable JavaScript in your web browser . 3130-00-114-43073130001144307 001144307
755-7431 Machine Key 5315997557431 997557431 . 5315-99-755-7431Machine Key5315997557431 997557431 W/581/00/2
W/581/00/2 PART 19 W/581/00/2/19 001144307 SSN.07/W/581/00/2 SSN.07/W/581/00/2/19 SSN.07/W/581/00

109 001206496 PART 109 QCA/13/Y/581/0000/0203/109 Y/581/0000 PART 112 001206496 PART 112 QCA/SSN.07/W/581/00/2
/1 Y/581/0000/0203/000 PART 112 001206496 PART 112 QCA/SSN.07/W/581/00/2/1 13/Y/581/0000/0203
/1 JavaScript in your web browser . 2040-99-755-5583Liner2040997555583 997555583 SSN.07/W/581/00/2

4730-99-554-1914 4730995541914 995541914 is an item having internal and/or external machine thread(s) (threads other than pipe or hose series), specifically designed to retain, by means or groove(s), shoulder(s), and the like, packing and/or a packing gland within a stuffing box. see also bushing, machine thread; inverted nut, tube coupling; and nut, tube coupling. excludes packing nut, stuffing tube; and use with electrical cable, and locknut, pipe.

3120-99-530-6529 3120995306529 995306529 is an item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.