5305-98-106-7378

145-5582 5340121455582 121455582 MOUNT,RESILIENT https//www.nsnlookup.com /fsg-53/fsc-5305/nz 5305-98-106-7378
Machine Screw 5305981067378 981067378,240/5 5305-98-106-7378 5305981067378 981067378 is an externally

1981 5305-98-107-7511 Tapping Thread Forming Screw 510/13RNCC: 3 | RNVC: 2 | DAC: 3 2 Mar 1984 5305-98-106-7378

2530-99-810-2386 2530998102386 998102386 WASHER,COPPER

5340-12-158-5001 5340121585001 121585001 is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. this item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. the item may have a center hole and/or bolt holes. excludes cup, hydraulic brake cylinder.

5365-01-147-3832 5365011473832 011473832 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.