5305-20-007-3019

Documents 5935-01-176-3253 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5305/ca 5305-20-007-3019
Socket Head Cap Screw 5305200073019,370-101 Documents 5305-20-007-3019 1+ Documents (More... )

5355-01-390-2467 5355013902467 013902467 is an item designed to transmit manual, rotary or linear motion to other devices. may include detachable or nondetachable stud (shaft), pointer, or skirt. it may have reference markings in the form of dots, arrows, hairlines, and/or symbols which may be used in conjunction with a calibrated panel, vernier indicator, and the like to indicate the position or motion of items. for items having spokes or simulated spokes radiating from near the center to near the outside rim of the item and relatively thin round disk-shaped items 3 inches (76.2 mm) in diameter or over, see handwheel. for items calibrated in units or series of divisions to denote relative positioning of devices see dial, control. excludes doorknob; and handle (as modified).

5962-01-270-6904 5962012706904 012706904 is a circuit designed to store information and/or coded instructions. item has pins or other connections to install in a computer or computing device. does not include magnetic drums, tapes, punched cards or the like. for items that have portable type connections see memory, portable, solid state.

1560-01-539-8400 1560015398400 015398400 is a rigid item of various shapes permanently attached to a structure of an aircraft, designed to provide access for inspection, service, replacement of components and/or adjustments. it is designed to be attached by means of hinges or similar device. it may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. it may include an observation window. excludes cover, access&#59; cover access, aircraft&#59; door, access&#59; door, aircraft and all doors not specifically designed to provide access for the purposes listed above.

5365-01-015-9810 5365010159810 010159810 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.