5220-01-591-5970

4 9 Mar 2004 5220-01-645-5602 Crimping Tool Gage G1024RNCC: 3 | RNVC: 2 | DAC: D 22 Jun 2015 5220-01-591-5970

5310-99-938-1787 5310999381787 999381787 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

5950-00-648-2767 5950006482767 006482767 is a coil or coils usually constructed with cores having low magnetic reluctance, whose primary purpose is to furnish an inductive impedance in power or audio frequency circuit ranging from zero to 20 kilohertz (kilocycles). includes audio frequency and power filter chokes, audio reactors and swinging chokes. does not include transformers or coils used above audio frequency range. excludes saturable reactor. for reactors with air cores, see coil (as modified).

5940-15-053-6318 5940150536318 150536318 is an item consisting of insulating material, which is specifically designed to have fastened thereon, or on which are fastened terminal(s), such as screws, solder lugs, solder studs, solderless connectors, clips, and the like. it is usually used for junctions or terminations of wire or cable assemblies. it does not include items as defined above with parts, such as resistors and capacitors mounted thereon. do not use if a more specific name exists, such as fuseholder; holder, resistor; fanning strip; contact assembly, electrical; jack assembly, tip; chamber, cable terminal; panel (2) (as modified); connector (as modified). excludes terminal, stud; terminal, feedthru, insulated; post, binding, electrical; and chassis, electrical-electronic equipment. for items having printed electrical conductor paths, see printed wiring board.

1730-01-269-4134 1730012694134 012694134 is an adapter designed to support/position aircraft components during installation/removal. it is used in conjunction with lift trailers, hydraulic jacks and the like. excludes items having a more specific name.