Premium Information is available for this item - Upgrade for $1 a day
5210-01-146-7715
* Taper Reaming Gage
5210011467715 011467715 23006756
One or more blades (leaves) of tempered steel ground to and marked with their respective taper. It is used for measuring the inside diameters of tubing, nuts drilled for tapping, and the width of slots. View more Taper Gage
May 2023
7
Marketplace 5210-01-146-7715
Request a Quotation from participating marketplace vendors
Related Documents 5210-01-146-7715 1+ Documents (More...)
United States (US) 4. 5210-01-146-7715 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 5210-01-146-7715 RQST NE Updated Every Day 5210-01-146-7715 RQST
Restrictions 5210-01-146-7715
5210-01-146-7715 is a * Taper Reaming Gage that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5210-01-146-7715
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5210-01-146-7715
- US Navy (N1R5)
- Effective Date:
- 17 Feb 2013
- Supplementary Receivers:
- GG
- US Navy (N9BZ)
- Effective Date:
- 1 May 2014
- Supplementary Collaborators:
- GGKE
Approved Sources 5210-01-146-7715
- Part Number
- Manufacturer
- Status
- 23006756
- Manufacturer
- 73342 - Allison Transmission Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 5210-01-146-7715
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- End Item Identification [AGAV]
- Tf41 Engine
- Special Features [FEAT]
- Jgage,Taper Reaming,Depth Setting;Consists Of 1 Pin,Matl Stl,Length 4.150 In.,1 End 0.375 In. High,Other End 0.010 Radius Max. Champhered 0.030 In. By 45 Degrees,0.250 In. Press Fit For Gage;1 Gage 0.800 In. Long,1.500 In. High,Matl Sae 02 Hdn,Rc 57-65,Taper 1 In 48 On Dia.-Included Angle 1 Degree 11 Minutes 37 Seconds Rate Of Reduction In Dia. Per Inch Of Length 0.0208-0.0209 In.;Taper Reamer 0.025 In. Oversize,11Th Stage Compressor Wheel,0.2896-0.2895 In. Dia.
DLA Procurement Analysis 5210-01-146-7715
Management Data 5210-01-146-7715
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
- Special Material ID:
- QN
- Jet Engines (TF41)
Similar Supply Items to 5210-01-146-7715
Freight Information 5210-01-146-7715
5210-01-146-7715 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 121570. A Sub NMFC of X. It has a NMFC Description of GAGES AIR LIQUID LEVEL PRESSURE. 5210-01-146-7715 is rated as class 100 when transported by Less-Than Truckload (LTL) freight. 5210-01-146-7715 is rated as class 100 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 61770 which rates the freight between FCL and LCL. 5210-01-146-7715 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 72B for ocean manifesting and military sealift. 5210-01-146-7715 is not classified as a special type of cargo when transported by water. 5210-01-146-7715 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 5210-01-146-7715
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- Packaging Data does not meet current MIL-STD-2073-1E
- Storage Environment
- Unheated General Purpose
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- 6.0" H x 2.0" W x 2.0" L
- --
- --
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 9.0" H x 4.0" W x 4.0" L
- --
- --
- --
- Any Suitable Process
- 9.0" H x 4.0" W x 4.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- Vendor's Protective Grease or Oil Coating
- MIL-PRF-121, Greaseproof, Waterproof Barrier
- A-A-1898, Grade II, Water Resistant Cellulosic Cushioning
- 1/2 inch thick
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- --
- MIL-PRF-121, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Domestic, Corrugated Fiberboard Box
Contracting Technical Data File (CTDF) 5210-01-146-7715 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: