5180-14-510-3300

4730-00-704-0769 4730007040769 007040769 is a fluid line fitting having a pipe, tube or hose connection or a through hole to accommodate a bolt, fluid passage on one end. the other end must have an external or internal thread for connecting a mating part to form a self-sealing coupling assembly. the fitting has either a self-sealing feature for the purpose of automatically shutting off the flow of fluid when disconnected from its mating half, or, if it has no self-sealing feature, is specifically designed to mate with a fitting with a self-sealing feature. for self-sealing fittings with a quick disconnect end, see coupling half, quick disconnect. for fluid line fittings without a self-sealing feature, see coupling (as modified).

$1 a day Upgrade your Account Upgrade 5945-01-348-9873Electromagnetic Relay5945013489873 013489873 2256-5
Day 5905-99-021-2256 RQST Updated Every Day 5905-99-021-2256 RQST NE Related Documents 5905-99-021-2256 5
Day 5905-99-663-2256 RQST Updated Every Day 5905-99-663-2256 RQST NE Related Documents 5905-99-663-2256 5

Upgrade your Account Upgrade 5975-01-301-3642Electrical Equipment Cabinet5975013013642 013013642 2256-5
$1 a day Upgrade your Account Upgrade 5945-01-348-9873Electromagnetic Relay5945013489873 013489873 2256-5
Day 5905-99-021-2256 RQST Updated Every Day 5905-99-021-2256 RQST NE Related Documents 5905-99-021-2256 5

5307-12-303-9214 5307123039214 123039214 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. the maximum diameter of the unthreaded portion must not be greater than the nominal thread diameter plus 0.020 inches (0.508 mm). the unthreaded portion must be without locking or wrenching provisions. it may be thread relieved. see also rod, threaded end and rod, continuous thread.

5305-12-124-3602 5305121243602 121243602 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.