5180-14-451-7968
Guided Missile Tool Kit
5180144517968 144517968 355075
Managed by France
NSN Created on 4 Dec 1991
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 5180-14-451-7968
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 5180-14-451-7968 5+ Documents (More...)
5330-12-152-6536 5330121526536 121526536 is a circular shaped item with an aperture manufactured to predetermined dimensions and designed for use as a seal in stuffing boxes, packing nuts, and the like. it may be (1) any nonmetallic molded or formed ring (except solid (without joint) rings having a square or rectangular cross section); or (2) any shredded metal or metal foil type metallic or semimetallic rings. excludes felt items but includes multimaterial items in which one of the materials is felt. for solid (without joints) nonmetallic items with a square or rectangular cross section, see washer (as modified) and gasket. for rubber items specifically designed for weather-proofing doors, windows, chests, and the like see seal, nonmetallic angle; seal, nonmetallic channel; and seal, nonmetallic, special shaped section. for circular (with aperature) nonmetallic items with a solid round cross-section see o-ring. excludes cup, compression; gasket; washer (as modified); and felt, mechanical, preformed.
5310-00-715-1720 5310007151720 007151720 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
1680-00-482-6673 1680004826673 004826673 COVER,REGULATOR,TOP
2910-15-164-4604 2910151644604 151644604 SCATOLA COMPLETA PO
6625-13-116-3302 6625131163302 131163302 is an instrument which is arranged to measure two or more different electrical quantities (such as volts, amps, and ohms) by means of associated circuits and switches. the value is usually expressed on a single calibrated dial or digital readout display. for items which are connected into a circuit and used chiefly to visually monitor an operation, see meter, multiple scale. see also counter, electronic, digital readout. excludes bridge (as modified).
Restrictions 5180-14-451-7968
End Users 5180-14-451-7968
- France (ZF)
Approved Sources 5180-14-451-7968
- Part Number
- Manufacturer
- Status
- 355075
- Manufacturer
- F0555 - Mbda France (Active)
- Primary Buy
- Primary Buy
- 355075
- F4992 - Eads (Replaced)
- Canceled/Obsolete
- Canceled/Obsolete
NATO Stock Numbers Related to 5180-14-451-7968
5180-14-405-5827 5180-14-523-7532 5180-14-474-8760 5180-14-517-7834 5180-14-478-4499 5180-14-390-7825 5180-14-474-8733 5180-14-433-6135 5180-14-550-5847 5180-14-372-3170 5180-14-291-3157 5180-14-523-0778 5180-14-449-7454 5180-14-373-6310 5180-12-331-5980 5180-14-444-1194 5180-14-437-4400 5180-14-475-0123