5136-21-842-7113

5310-32-081-3033 5310320813033 320813033 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

PAOZZ5305014195181 11083 8T4172 SCREW,CAP,HEXAGON H................. 1 3 PAOZZ5310013522753 11083 8T4121

www.nsnlookup.com /fsg-53/fsc-5340/us 5340-01-360-1750 Mounting Plate 5340013601750 013601750,4R9234 -2753 11083 8T4121
3 6 2510 https//www.nsnlookup.com /equipment-intelligence/land/fmtv/technical-manual -2753 11083 8T4121
land/fmtv/technical-manual TM-9-2320-365-24P LMTV Parts Manual M1078 Series Page 1132 -2753 11083 8T4121

PAOZZ5315007227625 07482 612A241P2 PIN,COTTER.......................... 1 9 PAOZZ5310013522753 11083 8T4121

PAFZZ2510013982006 11083 9Y8950 BRACKET,ENGINE MOUN................. 1 12 PAFZZ5310013522753 11083 8T4121