Premium Information is available for this item - Upgrade for $1 a day
5130-01-467-5868
Portable Power Drill Buffing And Sanding Attachment
5130014675868 014675868 4701A77
An attachment which converts a DRILL, PNEUMATIC, PORTABLE; or a DRILL, ELECTRIC, PORTABLE; to a portable power driven sander, buffer, or polisher. It consists of a flexible circular backing pad, usually rubber, furnished with DISK, ABRASIVE for sanding and wool bonnet(s) for buffing or polishing. It has a straight round 1/4 inch (6.35 millimeters) shank for inserting into the chuck of a drill. May have an angle drive of approximately 100 degrees or may have the drill shank mounted directly to the center of the backing pad. The angle drive type may provide for speed reduction or speed increases. View more Portable Power Drill Buffing And Sanding Attachment
January 2023
1
Marketplace 5130-01-467-5868
Request a Quotation from participating marketplace vendors
Related Documents 5130-01-467-5868 4+ Documents (More...)
Restrictions 5130-01-467-5868
5130-01-467-5868 is a Portable Power Drill Buffing And Sanding Attachment that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 5130-01-467-5868
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 5130-01-467-5868
- Italy (ZR01)
- Effective Date:
- 1 Sep 1999
Approved Sources 5130-01-467-5868
- Part Number
- Manufacturer
- Status
- 4701A77
- Manufacturer
- 39428 - Mcmaster-Carr Supply Co (Active)
- Primary Buy
- Primary Buy
Datasheet 5130-01-467-5868
- Characteristic
- Specifications
- FIIG
- Specifications
- A23900
- Overall Diameter [ADAV]
- 0.750 Inches Nominal
- Special Features [FEAT]
- Has 0.250 In. Shank Dia; Norton Speed-Lok Ts And Standard Abrasive Style Are Metal Twist-On Disc Fasteners; Rated For 40,000 Rpm Maximum
NATO Stock Numbers Related to 5130-01-467-5868
Freight Information 5130-01-467-5868
5130-01-467-5868 has freight characteristics managed by the Office of the Secretary of Housing and Urban Development.. 5130-01-467-5868 has a variance between NMFC and UFC when transported by rail and the description should be consulted.