5130-01-445-4454

1997 5130-01-445-4455 Portable Electric Disk Sander 6019-6RNCC: 3 | RNVC: 2 | DAC: 4 2 Jun 1997 5130-01-445-4454

5340-00-959-7207 5340009597207 009597207 is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. it may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. for items conducting electric current, see clip, electrical or clamp, electrical. for items which partially surround an item, see strap, retaining. for items which entirely surround an item and do not have inherent spring tension, see clamp, loop. see also clip, retaining. do not use if a more specific item name is available.

1560-01-370-3640 1560013703640 013703640 is a preformed item of various shapes, and contours, which may have a sandwich or honeycomb core bonded to a metallic or nonmetallic facing material. it is used to enclose integral portions of the fuselage or to form partitions or sections within a wing, empennage, fuselage, nacelle or crew compartment. it may have mounting provisions such as predrilled holes to facilitate installation, but will have no items attached to it except bracket (s) or other securing devices to accommodate its own mounting or support. it may be mounted by means of fasteners, bonding or welding. excludes panel, interior lining, aircraft; cover access; cover, access, aircraft; floor (1), aircraft; core material, cellular, structural.

5961-01-260-6612 5961012606612 012606612 is a two electrode semiconductor device having an asymmetrical voltage - current characteristic. may or may not include mounting hardware and/or heatsink. excludes light emitting diode and semiconductor device,photo. for items containing material such as selenium and copper oxide, see recifier, metallic.

4330-00-355-7752 4330003557752 003557752 is a replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. the removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. it may be designed to fit into a filter, fluid (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. the degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. excludes filter element, air conditioning. see also strainer element, sediment.