5130-00-798-0828

Special AT598A24-8RNCC: 5 | RNVC: 9 | DAC: XAT596-24-8RNCC: 5 | RNVC: 9 | DAC: 5 1 Jan 1962 5130-00-798-0828

Upgrade for $1 a day Upgrade your Account Upgrade 5930-99-804-8863Solenoid Switch5930998048863 998048863 170-4
4660853 2510-01-435-9694 167 1 6W728 4660854 2510-01-435-9691 167A 1 6W728 4660861 2540-01-434-5149 170 4
6W728 4660862 2540-01-434-6620 170 4 6W728 4660863 2540-01-434-5150 170 4 6W728 4660864 2540-01-434

5365-12-190-9445 5365121909445 121909445 is a circular-shaped item designed to maintain predetermined distance between assembled parts and/or for distributing pressure or preventing endwise movement between member parts. it has a solid cross-section and two flat parallel bearing surfaces. the distance between the bearing surfaces perpendicular to the axis of the centrally located hole shall not exceed 25 percent of the outside diameter. the diameter of the centrally located hole must exceed 75 percent of the outside diameter. excludes laminated items. for items manufactured from impregnated graphite or lubricated nonmetallic materials, excluding felt or plastics, see gasket. for items manufactured from lubricated plastics, see bearing, washer, thrust. for items manufactured from lubricated felt, see felt, mechanical, preformed. excludes disk, valve; insulator washer; and shim. see also spacer, plate and spacer, sleeve.

5310-99-956-5505 5310999565505 999565505 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

5915-01-351-4747 5915013514747 013514747 is an item designed to suppress undesired (interfering) frequencies and have a minimal effect on the desired frequencies when inserted in an electrical power circuit. excludes items which consist of a single capacitor, inductor, resistor, or devices consisting of only two or more circuit elements of the same basic name. excludes filter, low pass and suppressor, ignition interference. for items designed to be inserted in a line which is primarily intended to carry high frequency waves modulated with signals, such as antenna lead-in, see filter, band suppression and filter, band pass. see also limiter, electrical noise.