5130-00-248-5620

Sep 1968 5130-00-902-5580 Drill Motor Assembly 1221656RNCC: 3 | RNVC: 1 | DAC: 4 10 Feb 1967 5130-00-248-5620

3040-15-103-0954 3040151030954 151030954 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

1005-33-103-0954 1005331030954 331030954 is an item used as the supporting base for a gun mount or a machine gun mount. it excludes a cradle and/or pintle assembly.

5340-01-103-0954 5340011030954 011030954 is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. it is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. excludes guard, fan impeller.

6532-98-103-0954 6532981030954 981030954 BOOTS,OPERATING,SUR