5130-12-338-5072

5310-01-477-6337 5310014776337 014776337 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)

9505-15-122-1535 9505151221535 151221535 is a ferrous or nonferrous wire having a solid cross section that is square or rectangular with sharp or rounded corners or edges, or is round, half-round, hexagonal, or octagonal and whose diameter, width, or greatest distance between parallel faces is less than 3/8 inch or 10.0mm. the rectangular shape is limited to a thickness less than 3/32 inch or 2.5mm and a width of 1 1/4 inch or 30.0mm or less. for dimensions greater than above, see bar, metal. excludes items having electrical resistivity or conductivity ratings.

5330-01-477-7813 5330014777813 014777813 is a circular or moderately noncircular shaped item with an aperture. it is constructed of spring-like metal strips, preformed into a vee shape, laminated with a soft filler. it is designed to seal between two nondeforming surfaces. it may have an inner and/or outer, solid or spiral wound compression ring(s).

a day Upgrade your Account Upgrade 1560-01-515-6975Horizontal Stabilizer1560015156975 015156975 2-32000-8
(ZW01) Effective Date:1 Dec 2003 Approved Sources 1560-01-515-6975 Part NumberManufacturerStatus2-32000-8
76823 - Northrop Grumman Systems Corporation (Active) Original Design RNCC 3 RNVC 9 MEDALS DAC 6 2-32000-8

5330-01-477-7814 5330014777814 014777814 is a circular or moderately noncircular shaped item with an aperture. it is constructed of spring-like metal strips, preformed into a vee shape, laminated with a soft filler. it is designed to seal between two nondeforming surfaces. it may have an inner and/or outer, solid or spiral wound compression ring(s).