5130-12-197-4259

Documents ( More... ) https//www.nsnlookup.com /cage Wacker Neuson Se (CAGE Code D9912) Apr 1991 5130-12-197-4259

5130-15-188-7598 Power Hammer Chisel (241)A42912608690000RNCC: 5 | RNVC: 2 | DAC: U 12 Nov 2009 5130-12-197-4259

2540-41-002-2764 2540410022764 410022764 is a hook with a latch on the front and/or rear of a vehicle, to which another vehicle may be attached.

5310-20-002-2764 5310200022764 200022764 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

1010-33-002-2764 1010330022764 330022764 TRINQUETE,PALANCA D