What is Federal Supply Class 5130?

FSC 5130 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5130) in the USA for supply items codified in the category of Hand Tools, Power Driven.

What is NATO Supply Classification Class 5130?

NSC 5130 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5130 in the USA) for supply items codified in the category of Hand Tools, Power Driven.

Which Federal Supply Group is FSC 5130 in?

FSC 5130 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5130 in?

NSC 5130 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is an Electric Flexible Shaft Machine?

An Electric Flexible Shaft Machine (FLEXIBLE SHAFT MACHINE,ELECTRIC) is a power driven unit designed to transmit a rotary motion through a flexible shaft to an attached tool. It may include grinding wheels, sanding disks, buffing pads, drill chucks and similar attachments.

What is a Portable Electric Grinder?

A Portable Electric Grinder (GRINDER,ELECTRIC,PORTABLE) is a hand-held electrically driven grinder having a straight round spindle drive which operates at a nominal free speed of 3200 rpm to 6200 rpm or a high speed of over 10,000 rpm. It is furnished with grinding wheel, electric cable and attachment plug, and may have provisions for aerial suspension. See also DRIVER, VALVE SEAT GRINDING, ELECTRIC and ROTARY TOOL KIT, ELECTRIC.

What is a Horizontal Pneumatic Grinder?

A Horizontal Pneumatic Grinder (GRINDER,PNEUMATIC,HORIZONTAL) is a portable abrasive tool used in foundries, construction etc. for grinding, blending, and smoothing. Primarily used with straight type, hard organic bond abrasive wheels, but is suitable for use with radial wire brushes or cone wheels. Horizontal grinders are equipped with a motor, housing, and choice of throttle handle.

What is a Portable Electric Hammer?

A Portable Electric Hammer (HAMMER,ELECTRIC,PORTABLE) is an electrically driven hammer designed for the impact driving of items such as inserted chisels, masonry drills and like items. It may include working tools, ejector pins, and the like. In operation the tool is not fixed and is controlled by hand.

What is a Portable Pneumatic Hammer?

A Portable Pneumatic Hammer (HAMMER,PNEUMATIC,PORTABLE) is a compressed air driven hammer designed for impact driving of items such as inserted chisels, masonry drills, rivet sets and the like. In operation the tool is not fixed and is controlled by hand. See also BREAKER, PAVING. Excludes body and fender straightening items.

What is a Powder Actuated Projectile Unit Driver?

A Powder Actuated Projectile Unit Driver (DRIVER,PROJECTILE UNIT,POWDER ACTUATED) is a tool which utilizes an explosive charge to drive a specially designed stud, pin, or like projectile into or through solid material, such as concrete or steel. In operation, the tool is not fixed and is controlled by hand. It may be suitable for use under water.

What is an Electric Nut Runner And Screwdriver?

An Electric Nut Runner And Screwdriver (NUT RUNNER AND SCREWDRIVER,ELECTRIC) is an electric-powered hand-held rotary tool, primarily designed for driving nuts and screws. The item may be furnished with screwdriver bit(s), socket(s), and/or chuck(s) and has either an adjustable, kickout or positive type clutch. See also WRENCH, IMPACT, ELECTRIC.

What is a Pneumatic Nut Runner And Screwdriver?

A Pneumatic Nut Runner And Screwdriver (NUT RUNNER AND SCREWDRIVER,PNEUMATIC) is a compressed-air-driven hand-held rotary tool, primarily designed for driving nuts and screws. The item may be furnished with screwdriver bit(s), socket(s), and/or chuck(s), and has either a direct drive or clutch drive. See also WRENCH, IMPACT, PNEUMATIC.

What is a Portable Electric Nibbler?

A Portable Electric Nibbler (NIBBLER,ELECTRIC,PORTABLE) is an electric-powered hand-held tool designed to impart a force to a punch operating in conjunction with a die in a stationary jaw. The cutting action is accomplished by the removal of slugs of material by the successive stroke of the punch.

What is a Pneumatic Metal Cutting Shears?

A Pneumatic Metal Cutting Shears (SHEARS,METAL CUTTING,PNEUMATIC) is compressed air-driven shears having one stationary blade and one cutting blade operated by a reciprocating motion. Designed for cutting thin sheets, plates, and/or strips of metal along straight lines or slight curves.

What is a Pneumatic Blind Riveter?

A Pneumatic Blind Riveter (RIVETER,BLIND,PNEUMATIC) is an air-driven riveter, which is specifically designed for installing blind rivets and/or fasteners.

What is an Abrasive Wheel?

An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Boiler Tube Wire Brush Section Set?

A Boiler Tube Wire Brush Section Set (BRUSH SECTION SET,WIRE,BOILER TUBE) is an item consisting of a complete set of brush sections (cartridges), with spring(s), pin(s), retainer(s) as required for replacement in a BRUSH, WIRE, BOILER TUBE.

What is a Boiler Tube Wire Brush?

A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.

What is a Drill Chuck Angle Attachment?

A Drill Chuck Angle Attachment (ANGLE ATTACHMENT,DRILL CHUCK) is a tool having a shaft on one end and either a drill chuck or threaded spindle on the other end. The item has an angular construction that is either fixed or adjustable. It is designed for use with electric or pneumatic drills in close quarters where an ordinary drill could not be used.

What is a Power Hammer Chisel?

A Power Hammer Chisel (CHISEL,POWER HAMMER) is a cutting tool having a formed shank designed for use with HAMMER, ELECTRIC, PORTABLE or HAMMER, PNEUMATIC, PORTABLE. Excludes masonry drills and all noncutting items, such as calking, beading, fulling, butting tools, and the like.

What is a Boiler Tube Cutter?

A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.

What is a Power Hammer Caulking Tool?

A Power Hammer Caulking Tool (CAULKING TOOL,POWER HAMMER) is a noncutting chisel-like item, having a formed shank for use with a HAMMER, ELECTRIC, PORTABLE or HAMMER, PNEUMATIC, PORTABLE. It is used for calking rivets or sealing seams of metal whenever a pressure tight joint is required. Excludes BEADING TOOL, POWER HAMMER.

What is a Hole Saw Blade?

A Hole Saw Blade (BLADE,HOLE SAW) is a strip of steel with a continuous series of sharp cutting teeth along one edge. It is performed in a circle, to be used with either a hand drill or a machine, to cut circular holes in various materials.

What is a Pneumatic Tool Rivet Set?

A Pneumatic Tool Rivet Set (RIVET SET,PNEUMATIC TOOL) is a tool having a formed shank, designed for use with pneumatic riveters, holders-on, hammers, and the like, for driving and setting rivets. Excludes RIVET SET, BLANK, PNEUMATIC TOOL.

What is an Electric Etcher?

An Electric Etcher (ETCHER,ELECTRIC) is a marking tool designed to form a permanent design on the surface of metal or other material by means of a vibrating point, or by means of an eletric arc. The electric arc type requires the grounding of the object being marked and may contain an integral demagnetizer.

What is a Portable Pneumatic Router?

A Portable Pneumatic Router (ROUTER,PNEUMATIC,PORTABLE) is a compressed air driven, hand-held rotary tool which cuts by means of a router bit. It is used with a template and/or cutter guide in cutting away unwanted material in stair routing inlaying, light shaping work and the like. It is equipped with a pattern follower and/or attachment and may or may not be furnished with router bit(s).

What is an Electric Portable Circular Saw?

An Electric Portable Circular Saw (SAW,CIRCULAR,PORTABLE,ELECTRIC) is an electric driven saw which cuts by means of a revolving circular saw blade or abrasive saw wheel. It is furnished with circular saw blade(s) or abrasive saw wheel(s).

What is a Woodcutting Circular Saw Blade?

A Woodcutting Circular Saw Blade (BLADE,CIRCULAR SAW,WOODCUTTING) is a circular steel disk cut to a specific diameter and thickness with a continuous series of milled or ground teeth on the periphery, and an arbor hole of a specific size and shape for mounting on the arbor of a machine. It is used for cross cutting, ripping, mitering, beveling and grooving in wood and plastics.

What is a Portable Electric Plane?

A Portable Electric Plane (PLANE,ELECTRIC,PORTABLE) is an electrically powered, hand-held plane having a rotary cutter and an adjustable fence that can be set for straight or bevel cuts. It is used for smoothing and/or shaping wood.

What is a Power Hammer Tool Blank?

A Power Hammer Tool Blank (TOOL BLANK,POWER HAMMER) is an item having a formed shank on one end designed for use with HAMMER, ELECTRIC, PORTABLE or HAMMER, PNEUMATIC, PORTABLE. The opposite end of the straight body is not specially formed, but is designed for forging into any shape such as a calking tool, chisel and the like. Excludes RIVET SET, BLANK, PNEUMATIC TOOL.

What is a Rotary End Wire Brush?

A Rotary End Wire Brush (BRUSH,WIRE,ROTARY END) is a brush having a circular wire fill section secured in a tubular back, and a 1/4 inch round shank drive. The fill material extends parallel or at right angles to the axis of its shank. It is used in a rotary, power-operated device for carbon removing, cleaning, smoothing and the like. See also BRUSH, WIRE, ROTARY CUP; and BRUSH, WIRE, ROTARY WHEEL.

What is a Pneumatic Portable Rivet Head Shaver?

A Pneumatic Portable Rivet Head Shaver (SHAVER,RIVET HEAD,PORTABLE,PNEUMATIC) is a compressed air driven, hand-held tool having a cutter at one end for removing excess material from the heads of driven aircraft type countersunk rivets.

What is an Electric Portable Fabric Cutter?

An Electric Portable Fabric Cutter (CUTTER,FABRIC,PORTABLE,ELECTRIC) is an electric-powered, hand-guided tool having a straight reciprocating blade or a round rotating blade and a flat base. It is designed for use on a flat surface in cutting straight or irregular lines in a single or multiple layer of fabric or like material.

What is a Pneumatic Portable Reciprocating Saw?

A Pneumatic Portable Reciprocating Saw (SAW,RECIPROCATING,PORTABLE,PNEUMATIC) is a compressed air driven, hand-held and guided tool, designed primarily as a driver for hacksaw type saw blades and files. Excludes SAW, OPPOSED STROKE, PORTABLE, PNEUMATIC.

What is a Portable Electric Drill?

A Portable Electric Drill (DRILL,ELECTRIC,PORTABLE) is an electric powered hand-held rotary tool, having either a drill chuck or a morse taper socket. It may include drill accessories such as guide clamps, bushings and the like.

What is a Portable Pneumatic Drill?

A Portable Pneumatic Drill (DRILL,PNEUMATIC,PORTABLE) is a hand held, air-operated rotary tool, designed primarily for driving twist drills, reamers and the like. For items designed specifically for driving wood bits and equipped with a wood bit chuck, see BORER, WOOD, PNEUMATIC.

What is an Electric Portable Design And Pattern Cutter?

An Electric Portable Design And Pattern Cutter (CUTTER,DESIGN AND PATTERN,PORTABLE,ELECTRIC) is a power driven hand-guided tool which imparts a reciprocating motion to a chisel or saw blade. The tool is mounted on a flat base and is moved over the material being cut. It is designed for use in cutting intricate designs in light metals, wood, hardboard, plastics and the like. Excludes CUTTER, FABRIC, PORTABLE, ELECTRIC.

What is a Buffing Wheel?

A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.

What is a Rotary Wheel Wire Brush?

A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.

What is a Rotary Cup Wire Brush?

A Rotary Cup Wire Brush (BRUSH,WIRE,ROTARY CUP) is a brush in the shape of a cup, having an arbor hole at its center for securing to a shaft or mandrel, or may have an integral shank. The fill material extends parallel or nearly parallel to the axis of the metal hub. It is used in a rotary power-operated device for polishing, cleaning and the like. See also BRUSH, WIRE ROTARY END and BRUSH, WIRE, ROTARY WHEEL. Excludes floor polishing machine brushes.

What is an Abrasive Wheel Set?

An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.

What is a Socket Wrench Adapter-Extension?

A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Socket Wrench Attachment Universal Joint?

A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).

What is a Socket Wrench Extension?

A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.

What is a Sanding Drum?

A Sanding Drum (DRUM,SANDING) is an expandable rubber cylinder mounted on various types of mandrels for attaching to hand or machine power tools. The item is designed to hold an abrasive band of a specific size.

What is a Socket Wrench Set?

A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.

What is an Electric Metal Cutting Shears?

An Electric Metal Cutting Shears (SHEARS,METAL CUTTING,ELECTRIC) is electric powered shears having one stationary blade and one cutting blade operated by a reciprocating motion. Designed for cutting thin sheets, plates, and/or strips of metal along straight lines or slight curves.

What is an Electric Rotary Tool Kit?

An Electric Rotary Tool Kit (ROTARY TOOL KIT,ELECTRIC) is a hand-held electrically-driven item having a chuck which operates at a high speed of over 10,000 revolutions per minute. It contains two or more interchangeable rotary tool attachments which may grind, mill, polish, deburr, drill, etch, or the like.

Hand Tools, Power Driven

Federal Supply Class (FSC): 5130

NATO Supply Classification Class (NSC): 5130

Group Description: Hand Tools

Federal Supply Group (FSG): 51

NATO Supply Classification Group (NSG): 51

Page 118 of 123

NSN Format for Hand Tools, Power Driven

51	30	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 5130 Hand Tools, Power Driven

Includes Drills; Riveters; Portable Electric Saws; Pneumatic Tools; Abrasive Wheels, Cones, and other Abrasive Attachments for use only on Hand Held Power Tools.

Additional Information for Hand Tools, Power Driven

NATO Supply Class 5130 is a classification within NATO Supply Group 51, which is dedicated to hand tools. Specifically, NATO Supply Class 5130 focuses on power-driven hand tools.

Power-driven hand tools are tools that are operated by an external power source, such as electricity or compressed air, to perform various tasks. These tools are designed to provide additional power and efficiency compared to traditional hand tools.

Examples of power-driven hand tools that fall under NATO Supply Class 5130 include electric drills, power saws, pneumatic hammers, and other similar tools. These tools are commonly used in construction, manufacturing, and maintenance industries.

NATO Supply Class 5130 ensures that these power-driven hand tools meet the necessary standards and specifications required by NATO member countries. This classification helps in the procurement and supply chain management of these tools within NATO.

When referring to hand tools in NATO Supply Group 51, it is important to consider the specific classification of power-driven tools under NATO Supply Class 5130. This ensures accurate identification and categorization of these tools for procurement and logistical purposes within NATO.

NSN by Country

US
United States
26689 Items

IT
Italy
7537 Items

UK
United Kingdom
7242 Items

DE
Germany
4586 Items

FR
France
4069 Items

CA
Canada
3170 Items

DK
Denmark
1705 Items

NO
Norway
1662 Items

NZ
New Zealand
1178 Items

AU
Australia
1054 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 5130

What is Federal Supply Class 5130?: FSC 5130 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 5130) in the USA for supply items codified in the category of Hand Tools, Power Driven.
What is NATO Supply Classification Class 5130?: NSC 5130 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5130 in the USA) for supply items codified in the category of Hand Tools, Power Driven.
Which Federal Supply Group is FSC 5130 in?: FSC 5130 is in Federal Supply Group(FSG) 51 which contains .
Which NATO Supply Classification Group is NSC 5130 in?: NSC 5130 is in NATO Supply Classification Group(NSG) 51 which contains .

Supply Items Included in Federal Supply Class 5130

What is an Electric Flexible Shaft Machine? 91 Items: An Electric Flexible Shaft Machine (FLEXIBLE SHAFT MACHINE,ELECTRIC) is a power driven unit designed to transmit a rotary motion through a flexible shaft to an attached tool. It may include grinding wheels, sanding disks, buffing pads, drill chucks and similar attachments.
What is a Portable Electric Grinder? 500 Items: A Portable Electric Grinder (GRINDER,ELECTRIC,PORTABLE) is a hand-held electrically driven grinder having a straight round spindle drive which operates at a nominal free speed of 3200 rpm to 6200 rpm or a high speed of over 10,000 rpm. It is furnished with grinding wheel, electric cable and attachment plug, and may have provisions for aerial suspension. See also DRIVER, VALVE SEAT GRINDING, ELECTRIC and ROTARY TOOL KIT, ELECTRIC.
What is a Horizontal Pneumatic Grinder? 178 Items: A Horizontal Pneumatic Grinder (GRINDER,PNEUMATIC,HORIZONTAL) is a portable abrasive tool used in foundries, construction etc. for grinding, blending, and smoothing. Primarily used with straight type, hard organic bond abrasive wheels, but is suitable for use with radial wire brushes or cone wheels. Horizontal grinders are equipped with a motor, housing, and choice of throttle handle.
What is a Portable Electric Hammer? 156 Items: A Portable Electric Hammer (HAMMER,ELECTRIC,PORTABLE) is an electrically driven hammer designed for the impact driving of items such as inserted chisels, masonry drills and like items. It may include working tools, ejector pins, and the like. In operation the tool is not fixed and is controlled by hand.
What is a Portable Pneumatic Hammer? 392 Items: A Portable Pneumatic Hammer (HAMMER,PNEUMATIC,PORTABLE) is a compressed air driven hammer designed for impact driving of items such as inserted chisels, masonry drills, rivet sets and the like. In operation the tool is not fixed and is controlled by hand. See also BREAKER, PAVING. Excludes body and fender straightening items.
What is a Powder Actuated Projectile Unit Driver? 100 Items: A Powder Actuated Projectile Unit Driver (DRIVER,PROJECTILE UNIT,POWDER ACTUATED) is a tool which utilizes an explosive charge to drive a specially designed stud, pin, or like projectile into or through solid material, such as concrete or steel. In operation, the tool is not fixed and is controlled by hand. It may be suitable for use under water.
Riveter,Yoke,Pneumatic 148 Items
Sander,Belt,Electric,Portable 171 Items
Sander,Oscillating Pad,Pneumatic,Portable 81 Items
What is an Electric Nut Runner And Screwdriver? 241 Items: An Electric Nut Runner And Screwdriver (NUT RUNNER AND SCREWDRIVER,ELECTRIC) is an electric-powered hand-held rotary tool, primarily designed for driving nuts and screws. The item may be furnished with screwdriver bit(s), socket(s), and/or chuck(s) and has either an adjustable, kickout or positive type clutch. See also WRENCH, IMPACT, ELECTRIC.
What is a Pneumatic Nut Runner And Screwdriver? 464 Items: A Pneumatic Nut Runner And Screwdriver (NUT RUNNER AND SCREWDRIVER,PNEUMATIC) is a compressed-air-driven hand-held rotary tool, primarily designed for driving nuts and screws. The item may be furnished with screwdriver bit(s), socket(s), and/or chuck(s), and has either a direct drive or clutch drive. See also WRENCH, IMPACT, PNEUMATIC.
What is a Portable Electric Nibbler? 65 Items: A Portable Electric Nibbler (NIBBLER,ELECTRIC,PORTABLE) is an electric-powered hand-held tool designed to impart a force to a punch operating in conjunction with a die in a stationary jaw. The cutting action is accomplished by the removal of slugs of material by the successive stroke of the punch.
What is a Pneumatic Metal Cutting Shears? 37 Items: A Pneumatic Metal Cutting Shears (SHEARS,METAL CUTTING,PNEUMATIC) is compressed air-driven shears having one stationary blade and one cutting blade operated by a reciprocating motion. Designed for cutting thin sheets, plates, and/or strips of metal along straight lines or slight curves.
What is a Pneumatic Blind Riveter? 166 Items: A Pneumatic Blind Riveter (RIVETER,BLIND,PNEUMATIC) is an air-driven riveter, which is specifically designed for installing blind rivets and/or fasteners.
What is an Abrasive Wheel? 1135 Items: An Abrasive Wheel (WHEEL,ABRASIVE) is a rigid piece of abrasive with or without mounting facilities. Items having such mounting facilities as a fixed spindle, a threaded insert, or an arbor hole are designed for mounting on a grinding machine, tool chuck or mandrel. Items without mounting facilities are designed to be secured in a wheel holder by means of spring clamps.
What is a Socket Wrench Adapter? 186 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Screwdriver Bit? 985 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 3194 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Boiler Tube Wire Brush Section Set? 59 Items: A Boiler Tube Wire Brush Section Set (BRUSH SECTION SET,WIRE,BOILER TUBE) is an item consisting of a complete set of brush sections (cartridges), with spring(s), pin(s), retainer(s) as required for replacement in a BRUSH, WIRE, BOILER TUBE.
What is a Boiler Tube Wire Brush? 148 Items: A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.
What is a Drill Chuck Angle Attachment? 138 Items: A Drill Chuck Angle Attachment (ANGLE ATTACHMENT,DRILL CHUCK) is a tool having a shaft on one end and either a drill chuck or threaded spindle on the other end. The item has an angular construction that is either fixed or adjustable. It is designed for use with electric or pneumatic drills in close quarters where an ordinary drill could not be used.
What is a Power Hammer Chisel? 449 Items: A Power Hammer Chisel (CHISEL,POWER HAMMER) is a cutting tool having a formed shank designed for use with HAMMER, ELECTRIC, PORTABLE or HAMMER, PNEUMATIC, PORTABLE. Excludes masonry drills and all noncutting items, such as calking, beading, fulling, butting tools, and the like.
What is a Boiler Tube Cutter? 34 Items: A Boiler Tube Cutter (CUTTER,BOILER TUBE) is a tool, power and/or hand operated, designed to cut the end off a boiler tube while the tube is still installed in the boiler. Cutter is inserted in end of tube and rotated, thereby cutting the tube by means of a tool steel bit. Excludes CUTTER, TUBE and CUTTER, PIPE.
What is a Power Hammer Caulking Tool? 13 Items: A Power Hammer Caulking Tool (CAULKING TOOL,POWER HAMMER) is a noncutting chisel-like item, having a formed shank for use with a HAMMER, ELECTRIC, PORTABLE or HAMMER, PNEUMATIC, PORTABLE. It is used for calking rivets or sealing seams of metal whenever a pressure tight joint is required. Excludes BEADING TOOL, POWER HAMMER.
What is a Hole Saw Blade? 325 Items: A Hole Saw Blade (BLADE,HOLE SAW) is a strip of steel with a continuous series of sharp cutting teeth along one edge. It is performed in a circle, to be used with either a hand drill or a machine, to cut circular holes in various materials.
What is a Pneumatic Tool Rivet Set? 1457 Items: A Pneumatic Tool Rivet Set (RIVET SET,PNEUMATIC TOOL) is a tool having a formed shank, designed for use with pneumatic riveters, holders-on, hammers, and the like, for driving and setting rivets. Excludes RIVET SET, BLANK, PNEUMATIC TOOL.
Swaging Tool,Flexible Cable Terminal 10 Items
What is an Electric Etcher? 80 Items: An Electric Etcher (ETCHER,ELECTRIC) is a marking tool designed to form a permanent design on the surface of metal or other material by means of a vibrating point, or by means of an eletric arc. The electric arc type requires the grounding of the object being marked and may contain an integral demagnetizer.
What is a Portable Pneumatic Router? 23 Items: A Portable Pneumatic Router (ROUTER,PNEUMATIC,PORTABLE) is a compressed air driven, hand-held rotary tool which cuts by means of a router bit. It is used with a template and/or cutter guide in cutting away unwanted material in stair routing inlaying, light shaping work and the like. It is equipped with a pattern follower and/or attachment and may or may not be furnished with router bit(s).
What is an Electric Portable Circular Saw? 427 Items: An Electric Portable Circular Saw (SAW,CIRCULAR,PORTABLE,ELECTRIC) is an electric driven saw which cuts by means of a revolving circular saw blade or abrasive saw wheel. It is furnished with circular saw blade(s) or abrasive saw wheel(s).
What is a Woodcutting Circular Saw Blade? 12 Items: A Woodcutting Circular Saw Blade (BLADE,CIRCULAR SAW,WOODCUTTING) is a circular steel disk cut to a specific diameter and thickness with a continuous series of milled or ground teeth on the periphery, and an arbor hole of a specific size and shape for mounting on the arbor of a machine. It is used for cross cutting, ripping, mitering, beveling and grooving in wood and plastics.
What is a Portable Electric Plane? 72 Items: A Portable Electric Plane (PLANE,ELECTRIC,PORTABLE) is an electrically powered, hand-held plane having a rotary cutter and an adjustable fence that can be set for straight or bevel cuts. It is used for smoothing and/or shaping wood.
What is a Power Hammer Tool Blank? 25 Items: A Power Hammer Tool Blank (TOOL BLANK,POWER HAMMER) is an item having a formed shank on one end designed for use with HAMMER, ELECTRIC, PORTABLE or HAMMER, PNEUMATIC, PORTABLE. The opposite end of the straight body is not specially formed, but is designed for forging into any shape such as a calking tool, chisel and the like. Excludes RIVET SET, BLANK, PNEUMATIC TOOL.
What is a Rotary End Wire Brush? 330 Items: A Rotary End Wire Brush (BRUSH,WIRE,ROTARY END) is a brush having a circular wire fill section secured in a tubular back, and a 1/4 inch round shank drive. The fill material extends parallel or at right angles to the axis of its shank. It is used in a rotary, power-operated device for carbon removing, cleaning, smoothing and the like. See also BRUSH, WIRE, ROTARY CUP; and BRUSH, WIRE, ROTARY WHEEL.
What is a Pneumatic Portable Rivet Head Shaver? 47 Items: A Pneumatic Portable Rivet Head Shaver (SHAVER,RIVET HEAD,PORTABLE,PNEUMATIC) is a compressed air driven, hand-held tool having a cutter at one end for removing excess material from the heads of driven aircraft type countersunk rivets.
Blade,Portable Electric Fabric Cutter 16 Items
What is an Electric Portable Fabric Cutter? 55 Items: An Electric Portable Fabric Cutter (CUTTER,FABRIC,PORTABLE,ELECTRIC) is an electric-powered, hand-guided tool having a straight reciprocating blade or a round rotating blade and a flat base. It is designed for use on a flat surface in cutting straight or irregular lines in a single or multiple layer of fabric or like material.
What is a Pneumatic Portable Reciprocating Saw? 53 Items: A Pneumatic Portable Reciprocating Saw (SAW,RECIPROCATING,PORTABLE,PNEUMATIC) is a compressed air driven, hand-held and guided tool, designed primarily as a driver for hacksaw type saw blades and files. Excludes SAW, OPPOSED STROKE, PORTABLE, PNEUMATIC.
What is a Portable Electric Drill? 1539 Items: A Portable Electric Drill (DRILL,ELECTRIC,PORTABLE) is an electric powered hand-held rotary tool, having either a drill chuck or a morse taper socket. It may include drill accessories such as guide clamps, bushings and the like.
What is a Portable Pneumatic Drill? 839 Items: A Portable Pneumatic Drill (DRILL,PNEUMATIC,PORTABLE) is a hand held, air-operated rotary tool, designed primarily for driving twist drills, reamers and the like. For items designed specifically for driving wood bits and equipped with a wood bit chuck, see BORER, WOOD, PNEUMATIC.
What is an Electric Portable Design And Pattern Cutter? 17 Items: An Electric Portable Design And Pattern Cutter (CUTTER,DESIGN AND PATTERN,PORTABLE,ELECTRIC) is a power driven hand-guided tool which imparts a reciprocating motion to a chisel or saw blade. The tool is mounted on a flat base and is moved over the material being cut. It is designed for use in cutting intricate designs in light metals, wood, hardboard, plastics and the like. Excludes CUTTER, FABRIC, PORTABLE, ELECTRIC.
What is a Buffing Wheel? 110 Items: A Buffing Wheel (WHEEL,BUFFING) is a disk shaped item of loose, bonded, or solid construction having an arbor hole for attaching to a rotary power-operated tool or machine. It may be fabricated of a single piece of felt, rubber, leather, cork, or the like; a single piece of wood, leather covered; or plies of muslin, flannel, canvass, or the like sewed or cemented together. It is used for buffing and/or polishing or burnishing. Excludes BRUSH, ROTARY (as modified); WHEEL, ABRASIVE; and PAD, POLISHING AND RUBBING.
What is a Rotary Wheel Wire Brush? 435 Items: A Rotary Wheel Wire Brush (BRUSH,WIRE,ROTARY WHEEL) is a disk shaped unit having a fill section of wire material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for roughing, buffing and/or polishing various surfaces. See also BRUSH, WIRE, ROTARY CUP; BRUSH, WIRE, ROTARY END; and BRUSH, FIBER, ROTARY WHEEL.
What is a Rotary Cup Wire Brush? 197 Items: A Rotary Cup Wire Brush (BRUSH,WIRE,ROTARY CUP) is a brush in the shape of a cup, having an arbor hole at its center for securing to a shaft or mandrel, or may have an integral shank. The fill material extends parallel or nearly parallel to the axis of the metal hub. It is used in a rotary power-operated device for polishing, cleaning and the like. See also BRUSH, WIRE ROTARY END and BRUSH, WIRE, ROTARY WHEEL. Excludes floor polishing machine brushes.
What is an Abrasive Wheel Set? 23 Items: An Abrasive Wheel Set (WHEEL SET,ABRASIVE) is a group of items consisting of two or more WHEEL, ABRASIVE, of various shapes and grits, with or without mounting facilities. This may include a case or holder for storage of the items.
What is a Socket Wrench Adapter-Extension? 35 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 53 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 201 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Sanding Drum? 61 Items: A Sanding Drum (DRUM,SANDING) is an expandable rubber cylinder mounted on various types of mandrels for attaching to hand or machine power tools. The item is designed to hold an abrasive band of a specific size.
What is a Socket Wrench Set? 46 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Electric Metal Cutting Shears? 109 Items: An Electric Metal Cutting Shears (SHEARS,METAL CUTTING,ELECTRIC) is electric powered shears having one stationary blade and one cutting blade operated by a reciprocating motion. Designed for cutting thin sheets, plates, and/or strips of metal along straight lines or slight curves.
What is an Electric Rotary Tool Kit? 154 Items: An Electric Rotary Tool Kit (ROTARY TOOL KIT,ELECTRIC) is a hand-held electrically-driven item having a chuck which operates at a high speed of over 10,000 revolutions per minute. It contains two or more interchangeable rotary tool attachments which may grind, mill, polish, deburr, drill, etch, or the like.
What is a Pneumatic Rotary Tool Kit? 15 Items: A Pneumatic Rotary Tool Kit (ROTARY TOOL KIT,PNEUMATIC) is a group of items consisting of a handle containing a pneumatic motor and manual airflow valve with accessories such as a right angle drill, straight drill, metal shears and the like and/or supplies such as rotary files, or grinding, buffing or wire wheels.
What is a Pneumatic Impact Wrench? 588 Items: A Pneumatic Impact Wrench (WRENCH,IMPACT,PNEUMATIC) is a compressed air-driven hand held rotary tool, which converts continuous rotary motion to rotary impacting motion at a given torque, for use in tightening and loosening fasteners, such as bolts, nuts, screws, and the like. The item may contain screwdriver bit(s), socket(s) and/or chuck(s). Excludes NUT RUNNER AND SCREWDRIVER, PNEUMATIC.
What is a Vertical Pneumatic Grinder? 88 Items: A Vertical Pneumatic Grinder (GRINDER,PNEUMATIC,VERTICAL) is a portable abrasive tool used in foundries, refineries, and the like for cleaning castings, smoothing welds, and grinding. May also be used for heavy-duty sanding or wire brush applications. Vertical grinders are used with depressed center wheels and hard organic cup-type wheels. The grinders are complete with a motor, housing and a choice of throttle handle.
What is a Pneumatic Jam Riveter? 34 Items: A Pneumatic Jam Riveter (RIVETER,JAM,PNEUMATIC) is a compressed air-driven hammer designed for driving rivets in close quarters or confined areas. In operation, air is admitted into the shell of the tool extending a cylinder until firm contact is made on the rivet, at one end, at which time a riveting piston automatically comes into operation. Excludes similar items wherein the jamming cylinder is independently controlled from riveting piston.
What is a Pneumatic Tool Blank Rivet Set? 11 Items: A Pneumatic Tool Blank Rivet Set (RIVET SET,BLANK,PNEUMATIC TOOL) is a tool having a formed shank designed for use with pneumatic riveters, holders-on, hammers and the like. The working end has a blank face which, when machined to form a specific cupping style, becomes a RIVET SET, PNEUMATIC TOOL.
What is an Electric Portable Reciprocating Saw? 364 Items: An Electric Portable Reciprocating Saw (SAW,RECIPROCATING,PORTABLE,ELECTRIC) is an electric-powered, hand-held and guided tool, designed primarily as a driver for hack, scroll, or roughing-in type saw blades. It may be furnished with blade(s) for sawing materials such as sheet metals, plastics, wood and the like. Excludes hacksaw type items having the blade in a frame.
What is a Pneumatic Portable Circular Saw? 60 Items: A Pneumatic Portable Circular Saw (SAW,CIRCULAR,PORTABLE,PNEUMATIC) is a compressed air driven saw which cuts by means of a revolving circular saw blade or abrasive saw wheel. It is furnished with circular saw blade(s) or abrasive saw wheel(s).
What is an Electric Paint Scraper? 11 Items: An Electric Paint Scraper (SCRAPER,PAINT,ELECTRIC) is a manually operated hand-held tool with an electrical unit to soften paint and a scraping blade to remove it. See also SCALING AND CHIPPING TOOL, ELECTRIC.
What is a Socket Wrench Socket Set? 114 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set? 98 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Rotary Wheel Fiber Brush? 74 Items: A Rotary Wheel Fiber Brush (BRUSH,FIBER,ROTARY WHEEL) is a disk shaped unit having a fill section of vegetable fiber, synthetic filament, horsehair, or animal bristle material extending from the perimeter of the disk perpendicular to the axis of the hub. It is used with a rotary power-operated device for polishing, buffing, and/or cleaning various surfaces. See also BRUSH, WIRE, ROTARY WHEEL.
What is an Electric Impact Wrench? 300 Items: An Electric Impact Wrench (WRENCH,IMPACT,ELECTRIC) is an electric-powered hand-held rotary tool, which converts continuous rotary motion to rotary impacting motion at a given torque, for use in tightening and loosening fasteners, such as bolts, nuts, screws, and the like. The item may contain screwdriver bit(s), socket(s) and/or chuck(s). Excludes NUT RUNNER AND SCREWDRIVER, ELECTRIC.
What is a Scaling And Chipping Tool Cutter Bundle? 13 Items: A Scaling And Chipping Tool Cutter Bundle (CUTTER BUNDLE,SCALING AND CHIPPING TOOL) is a varying quantity of circular metal toothed blades which may be replaceable. They are separated by spacers and secured together on alternate axial members with retaining plates at each end.
Sander,Disk,Electric,Portable 306 Items
What is a Pneumatic Tool Outfit? 52 Items: A Pneumatic Tool Outfit is a group of pneumatic tools, pneumatic tool attachments or parts and hand tools, such as rock drill bits, auger bits, paving breakers, back fill tampers, saws and the like. For similar outfits including an air compressor, see PNEUMATIC TOOL AND COMPRESSOR OUTFIT.
What is a Pneumatic Tool And Compressor Outfit? 23 Items: A Pneumatic Tool And Compressor Outfit is a collection of items consisting of an air compressor and the pneumatic tools used therewith, such as rock drill bits, auger bits, paving breakers, back fill tampers, saws and the like. For similar outfits not including an air compressor, see PNEUMATIC TOOL OUTFIT.
What is a Portable Power Drill Buffing And Sanding Attachment? 40 Items: A Portable Power Drill Buffing And Sanding Attachment (BUFFING AND SANDING ATTACHMENT,PORTABLE POWER DRILL) is an attachment which converts a DRILL, PNEUMATIC, PORTABLE; or a DRILL, ELECTRIC, PORTABLE; to a portable power driven sander, buffer, or polisher. It consists of a flexible circular backing pad, usually rubber, furnished with DISK, ABRASIVE for sanding and wool bonnet(s) for buffing or polishing. It has a straight round 1/4 inch (6.35 millimeters) shank for inserting into the chuck of a drill. May have an angle drive of approximately 100 degrees or may have the drill shank mounted directly to the center of the backing pad. The angle drive type may provide for speed reduction or speed increases.
What is a Portable Power Drill Liquid Mixing Attachment? 23 Items: A Portable Power Drill Liquid Mixing Attachment (LIQUID MIXING ATTACHMENT,PORTABLE POWER DRILL) is an item designed to be driven by a portable electric or pneumatic drill for mixing liquids such as paints. It may be in the form of a bent wire, or it may consist of a shaft and propeller(s).
What is an Electric Water Closet-Pipe And Sewer Auger Kit? 20 Items: An Electric Water Closet-Pipe And Sewer Auger Kit (AUGER KIT,WATER CLOSET-PIPE AND SEWER,ELECTRIC) is a group of flexible auger bits (snakes), a metal guide tube shaped to facilitate entry into the water closet bowl, an electric drive head and various attachments. It is used to open clogged plumbing drains. See also AUGER MACHINE, PIPE AND SEWER, POWER OPERATED.
What is a Portable Sander Spindle Adapter? 26 Items: A Portable Sander Spindle Adapter (ADAPTER,SPINDLE,PORTABLE SANDER) is a dished flange metal item and a washer nut used to mount raised-hub type grinding disks on standard portable sander spindles. It may be furnished with a wrench. See also ARBOR, WHEEL, GRINDING-BUFFING-WIRE BRUSH.
What is a Portable Pneumatic Disk Sander? 225 Items: A Portable Pneumatic Disk Sander (SANDER,DISK,PNEUMATIC,PORTABLE) is a sander rated for disk sanding pads only.
What is a Portable Electric Router? 203 Items: A Portable Electric Router (ROUTER,ELECTRIC,PORTABLE) is an electric powered, hand-held rotary tool which cuts by means of a router bit. It is used with a template and/or cutter guide in cutting away unwanted material in stair routing, inlaying, light shaping work and the like. It is equipped with a pattern follower and/or attachment and may or may not be furnished with router bit(s).
What is a Polishing And Rubbing Pad? 138 Items: A Polishing And Rubbing Pad (PAD,POLISHING AND RUBBING) is a flat, circular disk of flexible or semiflexible fabric designed for attachment to a backing pad or polishing holder of a power driven polisher or disk buffer, used for polishing and rubbing. Excludes WHEEL, BUFFING.
What is a Rivet Pin Gun? 63 Items: A Rivet Pin Gun (GUN,RIVET PIN) is a hand-held pneumatic or hydraulic driving tool designed to perform the complete heading operation when installing a PIN, RIVET with a specially designed shank. In operation it simultaneously pulls on the pin shank while it pushes on the separate pin collar; this pulls the work together, swages the collar into the grooves of the pin, and breaks off the excess shank.
What is a Hydraulic Cylinder Sleeve Puller Kit? 38 Items: A Hydraulic Cylinder Sleeve Puller Kit (PULLER KIT,CYLINDER SLEEVE,HYDRAULIC) is a hydraulically operated puller with a series of parts and/or attachments specifically designed for pulling and replacing cylinder sleeves.
What is an Electric Portable Polisher? 54 Items: An Electric Portable Polisher (POLISHER,PORTABLE,ELECTRIC) is a hand-held electrically driven polisher specifically designed to perform various surface cleaning, polishing, and waxing operations. It is equipped with a flexible backing pad for mounting a polishing bonnet.
Sander-Polisher,Oscillating And Rotating,Pneumatic,Portable 21 Items
Sander-Polisher,Translatory Action,Pneumatic,Portable 16 Items
Sander-Polisher,Translatory Action,Electric,Portable 23 Items
What is a Pneumatic Etcher? 14 Items: A Pneumatic Etcher (ETCHER,PNEUMATIC) is an air driven marking tool designed to form a permanent design on the surface of metal or other material by means of a vibrating stylus.
What is a Riveter Angle Attachment? 30 Items: A Riveter Angle Attachment (ANGLE ATTACHMENT,RIVETER) is a mechanical item designed to be attached to a riveting hammer for the purpose of holding rivet sets at an angle for driving and setting rivets in close quarters or confined areas.
What is a Reciprocating Saw Blade? 659 Items: A Reciprocating Saw Blade (BLADE,RECIPROCATING SAW) is a blade with teeth on the cutting edge or edges and a tang (shank) on one end for use in a reciprocating saw or power drill attachment. The blades are used for straight and contour sawing of various kinds of materials such as wood, metal, plastic, and the like.
What is an Electric Scaling And Chipping Tool? 19 Items: An Electric Scaling And Chipping Tool (SCALING AND CHIPPING TOOL,ELECTRIC) is a hand-held, electrically powered tool having rows of cutter wheels, in bundles, loosely attached to the periphery of a drumlike frame. In operation, the frame rotates causing the cutter wheels to strike the surface to be cleaned. It is designed to remove paint, scale, rust, and other accumulations from steel and like surfaces.
What is a Horizontal Portable Drill Stand? 23 Items: A Horizontal Portable Drill Stand (STAND,PORTABLE DRILL,HORIZONTAL) is a mechanical device designed to mount and support a portable drill for use in drilling, buffing, grinding, wire brushing, and the like.
What is a Vertical Portable Drill Stand? 110 Items: A Vertical Portable Drill Stand (STAND,PORTABLE DRILL,VERTICAL) is a mechanical device designed to mount and support a portable drill for use as a vertical drill press.
What is a Tacker? 104 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Hydraulic Puller? 377 Items: A Hydraulic Puller (PULLER,HYDRAULIC) is a puller operated by a hydraulic force. The hydraulic force may be an integral part of the puller, or supplied from an external source. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL.
What is a Hole Saw Blade Kit? 35 Items: A Hole Saw Blade Kit (BLADE KIT,HOLE SAW) is consists of one or more BLADE, HOLE SAW and one or more of the following: Arbor, arbor adapter drill bit and the like, for use with either hand or power drilling machine. May include ejector spring.
What is a Portable Hydraulic Cutter? 68 Items: A Portable Hydraulic Cutter (CUTTER,HYDRAULIC,PORTABLE) is a pincer-like device to cut bars, cables, ropes, hawsers, automobile or aircraft structures and the like. For devices that have a similar purpose, but operate by forcing apart material, see SPREADER, HYDRAULIC, PORTABLE.
What is a Crimping Tool Die? 187 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Portable Hydraulic Spreader? 58 Items: A Portable Hydraulic Spreader (SPREADER,HYDRAULIC,PORTABLE) is a device with arms that are closed and inserted into a small space, then forced apart. It is designed to break or tear open damaged parts on vehicles, railway cars, and the like. See CUTTER, HYDRAULIC,PORTABLE; CUTTER-SPREADER, HYDRAULIC, PORTABLE.
What is a Pneumatic Crimping Tool? 49 Items: A Pneumatic Crimping Tool (CRIMPING TOOL,PNEUMATIC) is a compact, lightweight tool designed to be used as a hand tool or may be used as a production bench tool. It is used for crimping contacts and electrical wire. The internal ratcheting mechanism compels the tool to complete a full crimp cycle prior to identer release and return to preclude the possibility of a partial crimp. Pneumatic crimping tools usually are symmetrical and can be easily used by left and right handed operators. Bench mount allows the tool to be secured at any angle for optimum positioning.
What is a Sealant Dispenser? 46 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Gasoline Portable Circular Saw? 65 Items: A Gasoline Portable Circular Saw (SAW,CIRCULAR,PORTABLE,GASOLINE) is a gasoline engine driven saw which cuts by means of a revolving circular saw blade or abrasive saw wheel. It is furnished with circular saw blade(s) and/or abrasive saw wheel(s).
What is a Metal Cutter Blade? 120 Items: A Metal Cutter Blade (BLADE,METAL CUTTER) is an item with sharp edges for use on cutting equipment, scissors and the like.
What is a Powered Tool Handle? 90 Items: A Powered Tool Handle (HANDLE,POWERED TOOL) is an item designed to be used as an auxiliary handle on pneumatic or electric tools. The mounting end may be provided with a thread or clamping ring.
Cutter Bit,Plane 49 Items
What is a Hydraulic Impact Wrench? 70 Items: A Hydraulic Impact Wrench (WRENCH,IMPACT,HYDRAULIC) is a hydraulic-powered hand-held rotary tool, which converts continuous rotary impacting motion at a given torque, for use in tightening and loosening fasteners, such as bolts, nuts, screws, and the like. The item may contain screwdriver bit(s), socket(s), and/or chuck(s). Excludes WRENCH, IMPACT, PNEUMATIC and WRENCH, IMPACT, ELECTRIC.
What is an Electric Screwdriver? 199 Items: An Electric Screwdriver (SCREWDRIVER,ELECTRIC) is a hand-held, electrically driven, screwdriver having a chuck for mounting screwdriver bits. Excludes SCREWDRIVER,BATTERY POWERED;DRILL,ELECTRIC,PORTABLE;NUTRUNNER AND SCREWDRIVER,ELECTRIC;GRINDER,ELECTRIC,PORTABLE;ROTARY TOOL KIT,ELECTRIC.
What is a Battery Powered Screwdriver? 59 Items: A Battery Powered Screwdriver (SCREWDRIVER,BATTERY POWERED) is a hand-held, battery powered, screwdriver having a chuck for mounting screwdriver bits. Excludes SCREWDRIVER,ELECTRIC;DRILL,ELECTRIC,PORTABLE;NUTRUNNER AND SCREWDRIVER,ELECTRIC;GRINDER,ELECTRIC,PORTABLE;ROTARY TOOL KIT,ELECTRIC.
What is a Portable Pneumatic Die Grinder? 94 Items: A Portable Pneumatic Die Grinder (GRINDER,DIE,PNEUMATIC,PORTABLE) is a small hand held power tool, normally furnished with a collet or drill style chuck and lever throttle. Designed to accept carbide burs and small mounting abrasive wheels. Used for light detail grinding.
What is a Socket Wrench Screwdriver Attachment? 106 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Socket Wrench Screwdriver Attachment Set? 14 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is a Portable Hydraulic Nut Splitter? 14 Items: A Portable Hydraulic Nut Splitter (NUT SPLITTER,HYDRAULIC,PORTABLE) is a hydraulic tool designed for easy removal of corroded or tight nuts by splitting. The tool has a chisel which cracks the nut if it contacts the total height of the nut.
What is an Abrasive Disk Holder Pad? 55 Items: An Abrasive Disk Holder Pad (HOLDER PAD,ABRASIVE DISK) is an item designed to hold a DISK, ABRASIVE by either hook-and-loop fastener or self-adhesive means.
What is a Blind Riveter Nosepiece? 42 Items: A Blind Riveter Nosepiece (NOSEPIECE,RIVETER,BLIND) is an item specifically designed for use with a RIVETER, BLIND (as modified).
What is a Blind Riveter Mandrel? 41 Items: A Blind Riveter Mandrel (MANDREL,RIVETER,BLIND) is an item specifically designed for use with a RIVETER, BLIND (as modified).
What is a Power Drill Feed Screw? 10 Items: A Power Drill Feed Screw (FEED SCREW,POWER DRILL) is an attachment designed for use with a DRILL,ELECTRIC, PORTABLE or a DRILL, PNEUMATIC, PORTABLE, consisting of a screw and spoke type handle with centering taper. It is used as a source of force feed in operating electric and pneumatic portable drills.
What is a Hand Hose Fitting Swaging Tool Kit? 13 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Power Driven Portable Band Saw? 22 Items: A Power Driven Portable Band Saw (SAW,BAND,PORTABLE,POWER DRIVEN) is a hand-held and guided power driven saw which can be mounted on a bench or stand. It is designed to cut metal, plastic, wood, and the like by means of a band saw blade which revoles or rotates around a driver and idler wheel.
What is a Portable Electric Drill-Driver? 357 Items: A Portable Electric Drill-Driver (DRILL-DRIVER,ELECTRIC,PORTABLE) is a handheld power tool with two settings; one high rpm setting for drilling and one low rpm, high torque setting for installing fasteners, may be cordless. May include features such as a keyed or keyless type chuck, variable speed trigger, battery packs and charger (for cordless type).
What is a Hydraulic Cutter Blade? 23 Items: A Hydraulic Cutter Blade (BLADE,HYDRAULIC CUTTER) is a blade like device which has either cutting teeth or a sharp cutting edge on one side. It is specifically designed as a component of CUTTER,HYDRAULIC,PORTABLE or SPREADER,HYDRAULIC,PORTABLE.
What is a Portable Electric Jig Saw? 93 Items: A Portable Electric Jig Saw (SAW,JIG,ELECTRIC,PORTABLE) is a portable electric or battery power tool with a vertical reciprocating blade and a flat guide base primarily used to make intricate scroll or regular cuts in thin pieces of wood, metal or plastic.
What is a Portable Pneumatic Hammer Needle? 10 Items: A Portable Pneumatic Hammer Needle (NEEDLE,PNEUMATIC HAMMER,PORTABLE) is metallic rod with a straight flat or sharp end used with other similar items to be mounted in a HAMMER, PNEUMATIC, PORTABLE for metallic surfaces derusting operations.
What is a Portable Electric Rotary Hammer? 132 Items: A Portable Electric Rotary Hammer (HAMMER,ROTARY,ELECTRIC,PORTABLE) is a heavy duty hand-held portable power tool that accepts slotted drive shank or spline shank bits for drilling holes in or chipping into concrete or other masonary materials. For light duty drilling/hammering applications see DRILL-HAMMER, ELECTRIC, PORTABLE.
Sander,Finishing,Electric,Portable 105 Items
What is a Screwdriver Bit Holder? 57 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Pneumatic Riveter Pulling Head? 62 Items: A Pneumatic Riveter Pulling Head (PULLING HEAD,PNEUMATIC RIVETER) is a group of accessory items for use with a RIVETER, BLIND, PNEUMATIC. May or may not be contained in a case for storage or transportation.
What is a Power Tool Nut Setter Attachment? 29 Items: A Power Tool Nut Setter Attachment (NUT SETTER ATTACHMENT,POWER TOOL) is an attachment with a male hexagon shank that is primarily used with portable electric drills, drill-drivers, and the like. Socket end is used to set nuts and other types of hex head fasteners.
What is a Portable Electric Band Saw? 22 Items: A Portable Electric Band Saw (SAW,BAND,ELECTRIC,PORTABLE) is a hand-held electric power tool for cutting wood, plastics, metal and the like by means of a continuous band saw blade rotating between a drive wheel and idler wheel. It may have provisions for mounting to a bench or stand.
What is a Portable Electric Hammer-Drill? 92 Items: A Portable Electric Hammer-Drill (HAMMER-DRILL,ELECTRIC,PORTABLE) is a hand-held, electric-powered tool for drilling into brick, block, concrete or other masonry surfaces. It incorporates an impacting mechanism which may be disengaged to allow for conventional drilling operations. For items that use spline or slotted drive shank (SDS) drill bits, see HAMMER,ROTARY,ELECTRIC,PORTABLE.
What is a Portable Pneumatic Nailer? 26 Items: A Portable Pneumatic Nailer (NAILER,PNEUMATIC,PORTABLE) is a hand-held air-operated tool designed for driving nails

Stock Items From Supply Class 5130 Page 118of 123

5130-15-221-9545
Minitrapano

152219545
7-1295: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-21-868-0571
Reciprocating Saw Blade

218680571
48-00-1177: RNCC: 3 | RNVC: 2

14 Jul 1972

5130-12-364-2539
Screwdriver Bit

123642539
08260004-TCS: RNCC: 3 | RNVC: 2

4 Sep 2004

5130-17-121-7478
Polishing And Rubbing Pad

171217478
63806169016 FEIN: RNCC: 3 | RNVC: 2

21 Nov 2008

5130-12-376-7126
Pneumatic Blind Riveter

123767126
676720: RNCC: 3 | RNVC: 2

30 Oct 2008

5130-12-149-0691

5130-14-313-5030

5130-17-037-1258
Pneumatic Tool Rivet Set

170371258
HS16401-4-2NSCM73197: RNCC: 3 | RNVC: 2
HS16401-4-2: RNCC: 5 | RNVC: 2

3 Jun 1971

5130-12-316-7032
Rotary Driven Masonry Drill

123167032
61380/2: RNCC: 3 | RNVC: 9

2 Feb 1989

5130-15-136-1141
Trapano Batteria

151361141
P85-20K: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-25-105-1237

5130-25-108-1836
Befestigungsfuesse

5130-12-198-6536
Portable Electric Plane

121986536
NO PRIMARY REF 12-198-6536: RNCC: 3 | RNVC: 2
24201: RNCC: 5 | RNVC: 9
7 242 01 00 22 8: RNCC: 5 | RNVC: 9
HS2151: RNCC: 5 | RNVC: 9
5130-0074/3: RNCC: 5 | RNVC: 9
TL5130-0074/3: RNCC: 5 | RNVC: 9
5130-40000: RNCC: 6 | RNVC: 9

15 Feb 1984

5130-21-870-2970
Rotary Wheel Wire Brush

218702970
1006: RNCC: 3 | RNVC: 1
5130-0032: RNCC: 6 | RNVC: 9

26 Nov 1974

5130-12-132-2173
Electric Metal Cutting Shears

121322173
NO PRIMARY REF 12-132-2173: RNCC: 3 | RNVC: 2
KS3-5-1-220VASMZUB: RNCC: 5 | RNVC: 9
5130-0015-6: RNCC: 5 | RNVC: 9
5130-015-6: RNCC: 5 | RNVC: 9
TL5130-0015/6: RNCC: 5 | RNVC: 9
5130-30270: RNCC: 6 | RNVC: 9

30 May 1969

5130-15-135-9434
Trapano

151359434
M13RV: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-99-282-6331
Engraver Kit

992826331
741 7070: RNCC: 3 | RNVC: 2
7417070: RNCC: 5 | RNVC: 2

25 Feb 1992

5130-99-720-7876
Horizontal Pneumatic Grinder

997207876
STX29LR: RNCC: 3 | RNVC: 2

19 Jan 2000

5130-14-505-9811
H Cisaille-Ecarteur

145059811
CHE 2100: RNCC: 3 | RNVC: 2

2 Apr 1998

5130-15-213-9049
Graffatrice 'Omga'

152139049
501-P: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-210-8587
Kit Per Incisioni C

152108587
M9250: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-183-4816
Fresa A Profilo Int

151834816
C0MM631003020095: RNCC: 3 | RNVC: 2

30 Dec 2008

5130-15-161-4866
Trapano Elettrico B

151614866
TRAPANO ELETTRICO BOSCH POTENZA: RNCC: 3 | RNVC: 2

1 Oct 2000

5130-99-761-1973
Rotary Wheel Fiber Brush

997611973
PN7545-C150: RNCC: 3 | RNVC: 2

25 Apr 1991

5130-14-354-6717
Portable Electric Drill

143546717
PC20543CA: RNCC: 3 | RNVC: 2
PC13-573HA: RNCC: 5 | RNVC: 2

31 Jan 1979

5130-99-902-3929
Nosetip

999023929
71210-16030: RNCC: 3 | RNVC: 2
98PC02024: RNCC: 6 | RNVC: 9

27 Mar 1998

5130-99-206-7493

5130-66-135-1265
Portable Electric Drill

661351265
HP2010N: RNCC: 3 | RNVC: 2
ADDED AT CONVERSION: RNCC: 5 | RNVC: 1

3 Jul 1991

5130-25-103-9882

5130-15-211-4991
Lucidatrice

152114991
RAP18003E: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-134-5798
Smerigliatrice Friz

151345798
SAG550F: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-14-339-9204
Marteau Pne Boitier

143399204
A2-35: RNCC: 3 | RNVC: 2

18 Jan 1977

5130-21-688-0317
Portable Electric Belt Sander

216880317
NO PRIMARY REF 21-688-0317: RNCC: 3 | RNVC: 2
45-GP-12: RNCC: 4 | RNVC: 1
840: RNCC: 5 | RNVC: 9
500: RNCC: 5 | RNVC: 9

6 Jun 1968

5130-27-051-7380
Drill Chuck Angle Attachment

270517380
1177080: RNCC: 3 | RNVC: 2

24 Nov 2010

5130-17-037-1217
Pneumatic Tool Rivet Set

170371217
HS16401-5-2 1-8NSCM73197: RNCC: 3 | RNVC: 2
HS16401-5-2 1-8: RNCC: 5 | RNVC: 2

3 Jun 1971

5130-15-136-1162
Trapano A Percussio

151361162
P22-14: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-12-173-4231
Vertical Portable Drill Stand

121734231
NO PRIMARY REF 12-173-4231: RNCC: 3 | RNVC: 2
931-412-320: RNCC: 5 | RNVC: 9
931412320: RNCC: 5 | RNVC: 9
BST32: RNCC: 5 | RNVC: 9

13 Apr 1978

5130-14-237-9815

5130-15-191-8490
Sega Diritta Pendol

151918490
PSE1027: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-21-870-0054
Wire Wrappin Sleeve

218700054
19688: RNCC: 3 | RNVC: 2

14 Jun 1973

5130-98-202-9289
Socket Wrench Socket Set

982029289
NZCES 1752: RNCC: 3 | RNVC: 2

22 Nov 1988

5130-12-377-0966
Portable Hydraulic Cutter

123770966
056476: RNCC: 3 | RNVC: 2

11 Dec 2008

5130-22-601-0029
Faste Nose Assembly

226010029
99-1715: RNCC: 3 | RNVC: 2

23 Aug 2002

5130-99-437-5990
Electric Ca Die Set

994375990
UWEC1746-404: RNCC: 3 | RNVC: 2
1746/404: RNCC: 5 | RNVC: 2
0278-278071: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-12-192-2587
Portable Electric Drill-Hammer

121922587
NO PRIMARY REF 12-192-2587: RNCC: 3 | RNVC: 2
SB2E-801-115V: RNCC: 5 | RNVC: 9
SB2E-801POWERMAIC-Y: RNCC: 5 | RNVC: 9

5 Apr 1982

5130-99-774-6693
Hydrau Poppet Valve

997746693
25-900623: RNCC: 3 | RNVC: 2
1652-602497: RNCC: 5 | RNVC: 2
1652-602497: RNCC: 5 | RNVC: 9

25 Apr 1991

5130-98-205-3899
Socket Wrench Socket

982053899
DFAMPD00054/1-11/16: RNCC: 2 | RNVC: 2

29 Jun 2000

5130-99-203-3042

5130-17-118-1648
Portable Pneumatic Hammer

171181648
SKIL1755: RNCC: 3 | RNVC: 2

16 Dec 2005

5130-21-800-1540

5130-22-300-3065

5130-99-427-8495

5130-21-102-5180
Por Electric Hammer

5130-99-200-5389

5130-99-466-8243

5130-21-815-0142
Pneumatic Tool Rivet Set

218150142
839638: RNCC: 3 | RNVC: 2
SM10-4304: RNCC: 3 | RNVC: 2

30 Jun 1964

5130-12-362-1675
Horizontal Portable Drill Stand

123621675
S500A: RNCC: 3 | RNVC: 2
0601190025: RNCC: 5 | RNVC: 2

19 Jan 2004

5130-14-267-8836

5130-15-216-5799
Smerigliatrice Ango

152165799
BD5: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-328-2112
Papier Bohrer

123282112
F6A: RNCC: 3 | RNVC: 2

22 Apr 1992

5130-15-216-5837
Testata Per Rivetti

152165837
5130RN0646003: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-21-866-8890
Reciprocating Saw Blade

218668890
40099: RNCC: 3 | RNVC: 2
49099: RNCC: 5 | RNVC: 2
12403: RNCC: 5 | RNVC: 2

14 Jul 1972

5130-15-217-6915
Trapano Avvitatore

152176915
DW981K2: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-176-7031
Rotary Cup Wire Brush

121767031
0002608184: RNCC: 3 | RNVC: 2
9204.1517: RNCC: 3 | RNVC: 2
1608614001: RNCC: 3 | RNVC: 2
0002-608 184: RNCC: 5 | RNVC: 2
CC0703: RNCC: 5 | RNVC: 2
0002-608 184: RNCC: 5 | RNVC: 2
CC0703: RNCC: 5 | RNVC: 2
932-121-773: RNCC: 5 | RNVC: 9
TZ102 SUP 0,80: RNCC: 5 | RNVC: 9

13 Dec 1978

5130-14-534-5517
Pneumatic Tool Rivet Set

145345517
VHP501-22: RNCC: 3 | RNVC: 2

26 Mar 2003

5130-15-191-3482
Drill Collet

151913482
AT503C-21: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-99-391-2184
Screwdriver Bit

993912184
NO PRIMARY REF 99-391-2184: RNCC: 3 | RNVC: 2
2607001544: RNCC: 5 | RNVC: 2
491-5394: RNCC: 5 | RNVC: 2
RS491-5394: RNCC: 5 | RNVC: 2

2 May 2007

5130-99-168-5626
Pneuma Poppet Valve

991685626
FV 1072988: RNCC: 3 | RNVC: 2
M/50340/51: RNCC: 5 | RNVC: 2

14 Aug 1990

5130-14-243-0530
Palette Scie Circul

142430530
TS3060: RNCC: 3 | RNVC: 2

1 Jan 1968

5130-99-171-8990
Portable Electric Drill

991718990
398D: RNCC: 3 | RNVC: 2

3 Mar 2006

5130-21-893-1020
Portable Pneumatic Drill

218931020
7846-E: RNCC: 3 | RNVC: 2
7846E: RNCC: 5 | RNVC: 2

7 May 1983

5130-66-148-5542
Powder Actuated Projectile Unit Driver

661485542
03572-5: RNCC: 3 | RNVC: 2
UW10: RNCC: 3 | RNVC: 2

12 Jul 2002

5130-15-217-9767
Double Offset Rivet

152179767
ST130-4704: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-214-9914
Spazzola Rotativa

152149914
9658-60X30: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-217-3711
Avvitatore Reversib

152173711
T550: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-12-158-0895
Schalthebel

121580895
1602026038: RNCC: 3 | RNVC: 2

30 May 1969

5130-12-364-8751
Screwdriver Bit

123648751
08200010-TCS: RNCC: 3 | RNVC: 2

10 Nov 2004

5130-33-207-2678
Hole Saw Blade

332072678
431.023: RNCC: 3 | RNVC: 2
5200.00230: RNCC: 3 | RNVC: 2

11 Feb 2009

5130-99-605-7666
Insert Anvil

996057666
119376: RNCC: 3 | RNVC: 2
119376: RNCC: 5 | RNVC: 2

19 Aug 1993

5130-15-172-6013
Sega Circolare Marc

151726013
SEGA CIRCOLARE MARCA MAKITA MOD.: RNCC: 1 | RNVC: 2

1 Jun 2003

5130-21-844-4037
Nose Assembly

218444037
92214: RNCC: 3 | RNVC: 2
99-634: RNCC: 3 | RNVC: 2
99-781: RNCC: 5 | RNVC: 9

25 Jul 1966

5130-99-209-3783
Por Pneumatic Drill

992093783
NO PRIMARY REF 99-209-3783: RNCC: 3 | RNVC: 2
T3S1200: RNCC: 5 | RNVC: 2

25 Apr 1991

5130-14-469-5615
Rotary Driven Masonry Drill

144695615
TE-C15/25: RNCC: 3 | RNVC: 2
52967/7: RNCC: 5 | RNVC: 2

3 May 1994

5130-12-373-8942
Pneumatic Impact Wrench

123738942
0703 735: RNCC: 3 | RNVC: 2
DSS 1/2" H: RNCC: 5 | RNVC: 2

17 Dec 2007

5130-25-133-9487
Trykkluft Sliper

251339487
1QR9000B-03: RNCC: 3 | RNVC: 2

1 Jan 1984

5130-15-165-8569
Rubinetto Rapido Un

151658569
934004: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-15-216-6116
Punta Wire Wrapping

152166116
WB26M: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-21-876-0075
Portable Cylindrical Bore Honing Unit

218760075
3750: RNCC: 3 | RNVC: 2

15 Mar 1977

5130-27-044-2931
Porta Kirici-Delici

270442931
TE56: RNCC: 2 | RNVC: 1
475 18 00 10: RNCC: 2 | RNVC: 1

22 Jan 2009

5130-14-305-9689

5130-14-554-8193
Portable Electric Drill-Driver

145548193
6.02164.51: RNCC: 3 | RNVC: 2

29 Aug 2007

5130-13-119-2539
Socket Wrench Socket

131192539
14400A 5/16: RNCC: 3 | RNVC: 2
00.56.08.79: RNCC: 5 | RNVC: 2

9 Jan 2006

5130-17-101-4119
Socket Wrench Socket

171014119
2-46: RNCC: 3 | RNVC: 2
D 546 M: RNCC: 3 | RNVC: 2

27 May 1987

5130-15-231-1055
Trapano Elettrico 1

152311055
SB2E 1400 RT: RNCC: 3 | RNVC: 2
513015E089083: RNCC: 5 | RNVC: 9

19 Jul 2007

5130-15-236-9419
Trapano A Batteria

152369419
6070D: RNCC: 3 | RNVC: 2
513015E031620: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-15-216-8873
Trapano A Colonna D

152168873
MC450: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-12-346-8851
Metal Cutter Blade

123468851
6 39 03 079 01 2: RNCC: 3 | RNVC: 2
6 39 03 079 012 36MM: RNCC: 5 | RNVC: 2

22 Sep 1998

5130-12-346-2136
Portable Electric Belt Sander

123462136
0 601 278 703: RNCC: 3 | RNVC: 2
0601278703: RNCC: 5 | RNVC: 2
GVS350AE: RNCC: 5 | RNVC: 2

29 Jun 1998

5130-14-278-1983
A Lustrer Disque

5130-14-262-5626
N Circulaire Brosse

5130-25-108-1838
Universal V.Sitzfra

5130-99-716-9442
Pneumat Screwdriver

997169442
NO PRIMARY REF 99-716-9442: RNCC: 3 | RNVC: 2
2SA8L2000: RNCC: 5 | RNVC: 2

28 Aug 1976

5130-99-950-7493
Preformed W Ejector

999507493
NO PRIMARY REF 99-950-7493: RNCC: 3 | RNVC: 2
17-90567: RNCC: 5 | RNVC: 2

18 Jan 1977

5130-15-214-7447
Scalpello A Sgorbia

152147447
OXR65: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-26-301-0383
Portable Electric Disk Sander

263010383
0 601 37B 040: RNCC: 3 | RNVC: 2

4 Jun 2012

5130-15-165-8801
Spazzola A Disco Co

151658801
40102100: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-15-236-9414
Trapano A Batteria

152369414
6400DBV: RNCC: 3 | RNVC: 2
513015E026057: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-15-216-3322
Trapano A Percussio

152163322
W550A: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-66-152-6617
Hydraulic Puller

661526617
NALM00530-1: RNCC: 3 | RNVC: 2
H4096463-105G01: RNCC: 5 | RNVC: 9

16 Dec 2004

5130-14-393-2107
Riveuse Enclume

143932107
2361 01 07030: RNCC: 3 | RNVC: 2
23610107030: RNCC: 5 | RNVC: 2
310D7: RNCC: 5 | RNVC: 2

12 Apr 1984

5130-12-372-0271
Portable Electric Fabric Cutter Blade

123720271
63903192014: RNCC: 3 | RNVC: 2

12 Jun 2007

5130-33-003-6190
Socket Wrench Extension

330036190
10502/1: RNCC: 3 | RNVC: 2

25 May 1998

5130-14-435-6361
Rotary Driven Masonry Drill

144356361
52563/4: RNCC: 3 | RNVC: 2

14 Nov 1989

5130-12-168-5019
Portable Electric Hammer

121685019
TKKG55-5130-210: RNCC: 2 | RNVC: 2
0611205903: RNCC: 3 | RNVC: 2
11205: RNCC: 5 | RNVC: 2
5130-10220: RNCC: 6 | RNVC: 9

15 Mar 1977

5130-27-006-5325
Electric Portable Fabric Cutter

270065325
144074-001: RNCC: 6 | RNVC: 1

14 Sep 1998

5130-99-763-3578
Reciprocating Saw Blade

997633578
BLUESPECIAL24TPI: RNCC: 3 | RNVC: 2
SP BLUE BLADE 8"X24TPI: RNCC: 5 | RNVC: 2
3AP-7633578: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-99-772-9623
Pneu Ratchet Wrench

997729623
CP828H: RNCC: 3 | RNVC: 2
1077: RNCC: 5 | RNVC: 2
1077&1077-EU: RNCC: 5 | RNVC: 2
1077XP: RNCC: 5 | RNVC: 2
CP828H: RNCC: 5 | RNVC: 2
1077: RNCC: 5 | RNVC: 9
1077EU: RNCC: 5 | RNVC: 9

25 Apr 1991

5130-12-307-0632
Bohrgeraet Halter

123070632
4900059-211303.000.0: RNCC: 3 | RNVC: 2

5 May 1986

5130-37-555-0456

5130-12-130-7086
Buffing Wheel

121307086
123.757: RNCC: 3 | RNVC: 2
RL37: RNCC: 5 | RNVC: 2
123-757: RNCC: 5 | RNVC: 2

30 May 1969

5130-50-001-1869
Portable Electric Drill

500011869
0611253708: RNCC: 3 | RNVC: 2

28 Feb 2011

5130-12-384-2281
Pneumatic Riveter Pulling Head

123842281
7251621: RNCC: 3 | RNVC: 2

3 Feb 2011

5130-12-196-1648
Hydraulic Cylinder Sleeve Puller Kit

121961648
35-930F006: RNCC: 3 | RNVC: 2

7 Jun 1983

5130-21-868-1398
Pneumatic Impact Wrench

218681398
2TC4P: RNCC: 3 | RNVC: 2
93340AND1012724T01012728: RNCC: 5 | RNVC: 2
93340: RNCC: 5 | RNVC: 2

17 Nov 1972

5130-21-876-0500
Electr Drill Holder

218760500
9529: RNCC: 3 | RNVC: 2
5130-9218: RNCC: 6 | RNVC: 9

19 Jul 1977

5130-15-125-8383
Trapano A Batteria

151258383
GSB 9,6 VE: RNCC: 3 | RNVC: 2

8 Oct 1996

5130-15-190-3564
Disco

151903564
4MANSHADDSNNNG230X4X22-2: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-21-688-0022
Portable Electric Drill

216880022
1850-2: RNCC: 3 | RNVC: 1
45GP2: RNCC: 4 | RNVC: 1

6 Jun 1968

5130-66-023-7343
V Wire Rotary Brush

660237343
227: RNCC: 3 | RNVC: 2

1 Jan 1968

5130-12-343-4077
Portable Hydraulic Cutter

123434077
059.994.8.: RNCC: 3 | RNVC: 2
S90 BIBER: RNCC: 5 | RNVC: 2

16 Jun 1997

5130-12-334-1097
Blind Nietzugstift

123341097
7279116: RNCC: 3 | RNVC: 2

22 Mar 1994

5130-12-352-0770
Portable Electric Grinder

123520770
WSB2300: RNCC: 3 | RNVC: 2

13 Oct 2000

5130-98-207-3883
Portable Electric Belt Sander

982073883
DEMPD10036: RNCC: 2 | RNVC: 2

23 Sep 2010

5130-15-231-9911
Se Lame Da Metallo

152319911
2608654402: RNCC: 3 | RNVC: 2
513015E118505: RNCC: 5 | RNVC: 9

19 Jul 2007

5130-21-108-8564

5130-17-055-2287
Boutenschietuitrust

170552287
TVA5130-2-5-500: RNCC: 3 | RNVC: 2

9 May 1984

5130-66-137-3305
Powder Actuated Projectile Unit Driver

661373305
238-M1-J30 MARINE TOOL: RNCC: 3 | RNVC: 2

13 Nov 1992

5130-14-339-9213
Porte-Aiguille

143399213
A3-40: RNCC: 3 | RNVC: 2
503-47: RNCC: 5 | RNVC: 9

18 Jan 1977

5130-15-172-9215
Trapano Marca Pm Dr

151729215
TRAPANO MARCA PM DRILL MODELLO 1: RNCC: 1 | RNVC: 2

1 Jun 2003

5130-21-810-1108
Pneumatic Impact Wrench

218101108
1R534: RNCC: 3 | RNVC: 2
534: RNCC: 3 | RNVC: 2
45GP5: RNCC: 4 | RNVC: 1
534: RNCC: 5 | RNVC: 2
20: RNCC: 5 | RNVC: 2
5704-20: RNCC: 5 | RNVC: 2
18B9: RNCC: 5 | RNVC: 2

30 Aug 1963

5130-12-330-2265
Screwdriver Bit

123302265
DIN7426-4-A5,5: RNCC: 2 | RNVC: 9
01440510: RNCC: 3 | RNVC: 2
05058610001: RNCC: 3 | RNVC: 2
7033Z-4,0: RNCC: 3 | RNVC: 2
4007157300355: RNCC: 5 | RNVC: 2
840/3Z-4: RNCC: 5 | RNVC: 2
042004: RNCC: 5 | RNVC: 2
058610: RNCC: 5 | RNVC: 9
58610: RNCC: 5 | RNVC: 9
76159-040: RNCC: 5 | RNVC: 9

18 Nov 1992

5130-21-906-1740
Bit Sounding

219061740
9245-2810-30: RNCC: 3 | RNVC: 2

28 Apr 1990

5130-12-148-9034
Schutzschlauch

121489034
3 14 13 095 00 1: RNCC: 3 | RNVC: 2
JS13-95: RNCC: 5 | RNVC: 2

30 May 1969

5130-12-367-3657
Screwdriver Bit

123673657
851/1Z-PH3-32: RNCC: 3 | RNVC: 2
2215-PH3+: RNCC: 3 | RNVC: 2
056530: RNCC: 5 | RNVC: 2
4000896014569: RNCC: 5 | RNVC: 2

10 Aug 2005

5130-14-215-4174

5130-15-211-8166
Fresa Elettrica Aeg

152118166
0F450S: RNCC: 5 | RNVC: 3
0F450S: RNCC: 5 | RNVC: 9

16 Nov 2005

5130-22-220-9777

5130-25-122-2576
Haandbormaskin Elek

251222576
BV13: RNCC: 3 | RNVC: 2

1 Jan 1984

5130-15-234-8552
Pialletto Elettrico

152348552
982: RNCC: 3 | RNVC: 2

27 Aug 2007

5130-25-140-9529
Abrasive Wheel

251409529
27E1106: RNCC: 3 | RNVC: 2
51150110: RNCC: 5 | RNVC: 2

5 Feb 1992

5130-21-889-5826
Reciprocating Saw Blade

218895826
71053: RNCC: 3 | RNVC: 2

10 Jul 1982

5130-99-316-8066
Reciprocating Saw Blade

993168066
A-85709: RNCC: 3 | RNVC: 2
050MR-001: RNCC: 6 | RNVC: 9

24 Feb 2005

5130-12-178-6107
Screwdriver Bit

121786107
05055020001: RNCC: 3 | RNVC: 2
40MH-0.6-4.5: RNCC: 3 | RNVC: 2
800/0Z-0,6-4,5: RNCC: 3 | RNVC: 9
800/0Z-0,6X4,5X28: RNCC: 5 | RNVC: 2
7314151613068: RNCC: 5 | RNVC: 2
055020: RNCC: 5 | RNVC: 9
55020: RNCC: 5 | RNVC: 9
800/0-0,6X4,5: RNCC: 5 | RNVC: 9
40M0,8X4,7: RNCC: 5 | RNVC: 9
DIN3127-C0,6X4,5-C4: RNCC: 5 | RNVC: 9

3 May 1979

5130-12-197-6112
Buffing Wheel

121976112
3510,30X40SCH.6: RNCC: 3 | RNVC: 2
3510/30X40SCHAFT6: RNCC: 5 | RNVC: 2
VK 01.30X40: RNCC: 5 | RNVC: 2

7 Nov 1983

5130-98-201-2730
Hexagon Plain Nut

982012730
03014-SHT-3 ITEM 3: RNCC: 3 | RNVC: 2

28 May 1987

5130-15-191-6249
Chiave

151916249
8SQ53-0HK1: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-12-359-3893
Hydraulic Cutter Blade

123593893
84150/6260-12: RNCC: 3 | RNVC: 2

30 Jan 2003

5130-99-030-9573
Hydraulic Puller

990309573
WG1388-3378-041: RNCC: 3 | RNVC: 2
XP98PA01523: RNCC: 6 | RNVC: 9

23 Jan 1998

5130-21-631-0207
Abrasive Wheel

216310207
A32-D2: RNCC: 3 | RNVC: 1
B173-5: RNCC: 5 | RNVC: 9

6 Jun 1968

5130-12-170-1269
Drahtis Abstreifer

121701269
SES526-02: RNCC: 3 | RNVC: 2

27 Jun 1977

5130-15-237-5171
Fresa

152375171
SIL F2 120 5300/1 10: RNCC: 3 | RNVC: 2
513015E081615: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-15-213-1340
Dischi A Lamelle Ra

152131340
8740-60: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-313-3682
Horizontal Pneumatic Grinder

123133682
UG-38NS: RNCC: 3 | RNVC: 2

25 Mar 1988

5130-14-354-2775
Portable Pneumatic Drill

143542775
P137: RNCC: 3 | RNVC: 2

30 Jan 1979

5130-14-326-3463
Portable Pneumatic Drill

143263463
LBB45H004: RNCC: 3 | RNVC: 2

2 Jul 1975

5130-14-368-2792
Portable Pneumatic Drill

143682792
18850: RNCC: 3 | RNVC: 2
P2020DEA: RNCC: 5 | RNVC: 2

20 Feb 1981

5130-15-231-1060
Scalpello Piatto Mm

152311060
932315034: RNCC: 3 | RNVC: 2
513015E141833: RNCC: 5 | RNVC: 9

19 Jul 2007

5130-15-004-7013
Sega Circolare

150047013
W8402NC: RNCC: 3 | RNVC: 2

9 Dec 2013

5130-12-372-4422
Kraftbetrie Schutz

123724422
42387008110: RNCC: 3 | RNVC: 2

17 Jul 2007

5130-14-215-5065

5130-99-204-2797
Rivete Pulling Head

992042797
H680: RNCC: 3 | RNVC: 1
3AP4347: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-15-161-5175
Smerigliatrice Femi

151615175
SMERIGLIATRICE FEMI ART.247 CE-H: RNCC: 3 | RNVC: 2

1 Oct 2000

5130-99-204-6979
Screwdriver Bit

992046979
5242: RNCC: 3 | RNVC: 2
20233: RNCC: 5 | RNVC: 2

25 Apr 1991

5130-15-165-8486
Martello Atlas

151658486
RRN22P: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-15-191-7191
Roditrice

151917191
KN32: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-14-304-0238

5130-21-688-0242
Reciprocating Saw Blade

216880242
U1365: RNCC: 3 | RNVC: 2

6 Jun 1968

5130-15-214-4245
Avvitatore Pneumati

152144245
2F89-P1100: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-21-102-3352
Electric Impact Wrench

211023352
34A1: RNCC: 3 | RNVC: 2
45GP6: RNCC: 4 | RNVC: 1
500986: RNCC: 6 | RNVC: 9
502616-3: RNCC: 6 | RNVC: 9

4 Jun 1968

5130-12-129-2980

5130-15-191-7983
Giravite A Croce

151917983
ITC13023: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-15-161-8220
Avvitatore A Batter

151618220
AVVITATORE A BATTERIA SKILL MOD.: RNCC: 3 | RNVC: 2

1 Oct 2000

5130-21-860-7589
Reciprocating Saw Blade

218607589
48-42-0600: RNCC: 3 | RNVC: 2
5130-0007: RNCC: 5 | RNVC: 9

18 Feb 1971

5130-14-368-7851
Socket Wrench Adapter

143687851
J01032-00-0000P002: RNCC: 3 | RNVC: 2

10 Mar 1981

5130-21-906-1477
Pneumatic Impact Wrench

219061477
AT325B: RNCC: 3 | RNVC: 2

6 Oct 1989

5130-98-200-2803
Vertical Portable Drill Stand

982002803
PS32R: RNCC: 3 | RNVC: 2
PS32R: RNCC: 5 | RNVC: 9

14 Apr 1986

5130-15-176-5734
Smerigliatrice-Puli

151765734
MOD.199 HP2: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-99-789-2711
Screwdriver Bit

997892711
100286-9000-021: RNCC: 3 | RNVC: 2
769-232: RNCC: 5 | RNVC: 2
UWS4D2: RNCC: 6 | RNVC: 9

18 Jul 2002

5130-17-103-5671
Horizontal Pneumatic Grinder

171035671
TVA5130-2-264-15C-1.1.D: RNCC: 3 | RNVC: 2

12 Sep 1989

5130-15-165-8800
Trapano Atlas

151658800
8421021448: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-21-905-9946
Rotary Wheel Wire Brush

219059946
13-802: RNCC: 3 | RNVC: 2

5 Aug 1989

5130-15-218-0296
Martello A Batteria

152180296
8015DW: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-194-7249
Corona Diamantata D

151947249
370253: RNCC: 3 | RNVC: 2
(241)AD237370253: RNCC: 5 | RNVC: 2

30 Dec 2010

5130-99-443-3514

5130-99-440-4025
Brush

994404025
NO PRIMARY REF 99-440-4025: RNCC: 3 | RNVC: 2
119: RNCC: 5 | RNVC: 2
W4WD06310: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-12-357-4769
Portable Hydraulic Cutter-Spreader

123574769
84150/6239: RNCC: 3 | RNVC: 2
LKS35EN: RNCC: 5 | RNVC: 2

25 Jun 2002

5130-12-378-2315
Portable Electric Hammer

123782315
H60MR: RNCC: 3 | RNVC: 2
4966376126644: RNCC: 5 | RNVC: 2
93221636: RNCC: 5 | RNVC: 2

20 Mar 2009

5130-98-106-5698
Abrasive Wheel

981065698
964171: RNCC: 3 | RNVC: 2

3 Oct 1980

5130-17-120-1594
Pneumatic Portable Reciprocating Saw

171201594
V775: RNCC: 3 | RNVC: 2

21 Feb 2007

5130-15-220-2495
Disco Flex Per Ferr

152202495
FERRO230X3,2X22: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-99-277-5333

5130-14-546-9212
Pneumatic Impact Wrench

145469212
E4346: RNCC: 3 | RNVC: 2
SYQ-5999: RNCC: 5 | RNVC: 2

7 Sep 2005

5130-14-334-8103
Socket Wrench Socket

143348103
NV11-16: RNCC: 3 | RNVC: 2

2 Jun 1976

5130-22-609-6359
Pneumatic Tool Rivet Set

226096359
FMS-46-6-27-61: RNCC: 3 | RNVC: 2

11 Feb 2005

5130-15-165-8775
Cacciavite Ad Aria

151658775
1729G3: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-15-165-8704
Sega Circolare Per

151658704
80803208: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-66-146-8680
Electric Etcher

661468680
SUPERTOOL: RNCC: 3 | RNVC: 2
T4754: RNCC: 5 | RNVC: 2

14 Sep 2000

5130-15-217-7409
Trapano Elettronico

152177409
SB2E20RS: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-217-8383
Pistola Pneumatica

152178383
MOD100B: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-218-0892
Trapano Makita

152180892
6013BR: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-176-0090
Mola Abrasiva 115

151760090
D9813FERRO: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-99-751-0058
Portable Electric Drill-Hammer

997510058
8317-6322-06: RNCC: 3 | RNVC: 1
CES 40397: RNCC: 6 | RNVC: 9
637: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-14-334-8120
Socket Wrench Socket

143348120
NK.15/16: RNCC: 3 | RNVC: 2
3148510369204: RNCC: 5 | RNVC: 2
NK15-16: RNCC: 5 | RNVC: 2
0036920: RNCC: 5 | RNVC: 9

4 Oct 2000

5130-14-296-0209
Portable Electric Grinder

142960209
NO PRIMARY REF14-296-0209: RNCC: 3 | RNVC: 2
1801-220X380V: RNCC: 5 | RNVC: 9

1 Jan 1973

5130-98-205-3903
Socket Wrench Socket

982053903
DFAMPD00054/1-13/16: RNCC: 2 | RNVC: 2

29 Jun 2000

5130-12-320-0845
Pneumatic Tool Rivet Set

123200845
100A3-3/32: RNCC: 3 | RNVC: 2
100A3-104: RNCC: 5 | RNVC: 2

6 Dec 1989

5130-99-443-2934

5130-99-443-3309

5130-15-175-9187
Smerigliatrice Ango

151759187
GM62: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-99-443-3461

5130-99-443-2930

5130-15-004-6966
Trapano

150046966
1454ES: RNCC: 3 | RNVC: 2

9 Dec 2013

5130-12-186-1379
Portable Electric Drill

121861379
7 203 03 99 22 6: RNCC: 3 | RNVC: 2
TK5130-015: RNCC: 5 | RNVC: 2
72030399226: RNCC: 5 | RNVC: 2
ASZX648-2: RNCC: 5 | RNVC: 2
ASZX648-2MZUB: RNCC: 5 | RNVC: 2
TL5130-0003: RNCC: 5 | RNVC: 9
5130-20470: RNCC: 6 | RNVC: 9

2 Dec 1980

5130-37-518-4375
Pneumatic Nut Runner And Screwdriver

375184375
A3.04.029: RNCC: 3 | RNVC: 2

30 Jul 2009

5130-12-370-7526
Power Hammer Chisel

123707526
1618601002: RNCC: 3 | RNVC: 2
3165140015837: RNCC: 5 | RNVC: 2

18 Dec 2006

5130-14-243-0484
Siege Superieur De

142430484
TR2035: RNCC: 3 | RNVC: 2

1 Jan 1968

5130-98-200-0276
Portable Electric Drill-Hammer

982000276
8419B: RNCC: 3 | RNVC: 2

19 Nov 1985

5130-12-363-4344
Portable Electric Oscillating Pad Sander

123634344
567759: RNCC: 3 | RNVC: 2
RS100CQ: RNCC: 5 | RNVC: 2
RS1C: RNCC: 5 | RNVC: 2

15 Jun 2004

5130-14-245-0409

5130-15-209-0530
Seghetto Alternativ

152090530
PS1E: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-99-465-9898
Machin Rotary Brush

994659898
GEM106: RNCC: 3 | RNVC: 2
3B2446: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-15-209-0078
Seghetto Elettrico

152090078
STSE400: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-356-6308
Electric Portable Circular Saw

123566308
1445: RNCC: 3 | RNVC: 2
5130-02060: RNCC: 6 | RNVC: 9

18 Mar 2002

5130-15-221-0569
Trapano

152210569
11DP-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-320-1844
Pneumatic Tool Rivet Set

123201844
108AN-1/8: RNCC: 3 | RNVC: 2
108AN-168: RNCC: 5 | RNVC: 2
168: RNCC: 5 | RNVC: 9

15 Dec 1989

5130-25-131-2118
Portable Electric Drill-Hammer

251312118
TE-12S: RNCC: 3 | RNVC: 2
TE-12S: RNCC: 5 | RNVC: 2
TE12S: RNCC: 5 | RNVC: 2
5130-25-132-4320: RNCC: 6 | RNVC: 9

1 Jan 1984

5130-25-147-7016
Electric Portable Circular Saw

251477016
MA8007261: RNCC: 6 | RNVC: 9
C6U: RNCC: 6 | RNVC: 9

10 Jul 1998

5130-12-316-0948
Tacker

123160948
NO PRIMARY REF 12-316-0948: RNCC: 3 | RNVC: 2
PTK19EMZUB: RNCC: 5 | RNVC: 9
TL5130-0115: RNCC: 5 | RNVC: 9
5130-01020: RNCC: 6 | RNVC: 9

21 Dec 1988

5130-12-381-2514
Electric Portable Reciprocating Saw

123812514
0603353101: RNCC: 3 | RNVC: 2
PST 900 PEL: RNCC: 5 | RNVC: 2

26 Jan 2010

5130-98-103-2760
Sheet Me Cutter Kit

981032760
NZCES 874: RNCC: 3 | RNVC: 2

27 Feb 1974

5130-15-132-7983
Levigatrice Angolar

151327983
LEM: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-25-138-9481

5130-99-206-3453

5130-12-129-0506
Pneumatic Tool Rivet Set

121290506
122664: RNCC: 3 | RNVC: 2
71-2137-6: RNCC: 5 | RNVC: 9
87022537: RNCC: 5 | RNVC: 9

30 May 1969

5130-21-102-3686
Pneumatic Impact Wrench

211023686
4036: RNCC: 3 | RNVC: 2
5081A1: RNCC: 3 | RNVC: 2
45GP5: RNCC: 4 | RNVC: 1
478: RNCC: 5 | RNVC: 9
508: RNCC: 5 | RNVC: 9
40-6972: RNCC: 5 | RNVC: 9
WA10768: RNCC: 6 | RNVC: 9

6 Jun 1968

5130-12-348-4976
Rotary Driven Masonry Drill

123484976
4932343656: RNCC: 3 | RNVC: 2
4932-3436-56: RNCC: 5 | RNVC: 2

1 Jul 1999

5130-66-119-4376
Sander Bearing Pad

661194376
9724-1028-00: RNCC: 3 | RNVC: 2

24 Nov 1983

5130-12-192-8120
Pneumatic Tool Rivet Set

121928120
B4X4X4,75: RNCC: 3 | RNVC: 2
B4X4X4-75: RNCC: 5 | RNVC: 2

26 May 1982

5130-15-209-0290
Levigatrice Orbital

152090290
0-603-256-9: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-99-492-9520
Socket Wrench Socket

994929520
MS5-41: RNCC: 3 | RNVC: 2

5 Oct 2009

5130-99-443-3246

5130-12-384-5671
Rotary Wheel Wire Brush

123845671
BU-028: RNCC: 3 | RNVC: 2
356131000: RNCC: 5 | RNVC: 2

9 Mar 2011

5130-99-838-6338
Reaction Arm

998386338
HLCT06-115: RNCC: 3 | RNVC: 2
HP-GA.A4.100125 ITEM 42: RNCC: 5 | RNVC: 2
HP-GA.A4.100125/42: RNCC: 5 | RNVC: 2

2 Oct 2001

5130-15-213-7250
Levigatore Sbavator

152137250
GR320-DM30-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-21-860-8737
Abrasive Wheel

218608737
RAPIDCUT28: RNCC: 3 | RNVC: 2

15 Apr 1971

5130-12-394-6230
Pneumatic Impact Wrench

123946230
8951000037: RNCC: 3 | RNVC: 2
RC2257: RNCC: 5 | RNVC: 2

19 Dec 2013

5130-12-023-0182

5130-15-125-8783
Trapano

151258783
PBH200RE: RNCC: 3 | RNVC: 2

8 Oct 1996

5130-21-116-6118
Hammer Casing

211166118
534-727P: RNCC: 3 | RNVC: 2

4 Jun 1968

5130-12-372-6855
Pneumatic Impact Wrench

123726855
202225RE: RNCC: 3 | RNVC: 2
2225RE: RNCC: 5 | RNVC: 2

13 Aug 2007

5130-98-205-3663
Socket Wrench Extension

982053663
DFAMPD00057/13IN: RNCC: 3 | RNVC: 2

19 Jun 2000

5130-17-030-8720
Portable Electric Grinder

170308720
TS5130-0648: RNCC: 3 | RNVC: 2
0601-201-010: RNCC: 6 | RNVC: 9

8 Jan 1973

5130-99-201-9102

5130-25-139-4710
Rotary Cup Wire Brush

251394710
5122: RNCC: 3 | RNVC: 2

22 Feb 1991

5130-12-320-1846
Pneumatic Tool Rivet Set

123201846
108AN-3/16: RNCC: 3 | RNVC: 2
108AN-270: RNCC: 5 | RNVC: 2
270: RNCC: 5 | RNVC: 9

15 Dec 1989

5130-12-375-6884
Portable Electric Drill-Hammer

123756884
0611256220: RNCC: 3 | RNVC: 2
GBH 24 V: RNCC: 5 | RNVC: 2
0611256D20: RNCC: 5 | RNVC: 2

24 Jun 2008

5130-99-727-4031
Pneumatic Crimping Tool

997274031
13900161: RNCC: 3 | RNVC: 2
99-04-401: RNCC: 5 | RNVC: 2

30 Nov 2006

5130-17-037-4514
Pneumatic Tool Rivet Set

170374514
N2550: RNCC: 3 | RNVC: 2

25 Feb 1971

5130-12-312-1835
Pneumatic Portable Circular Saw

123121835
NO PRIMARY REF 12-312-1835: RNCC: 3 | RNVC: 2
TL5130-0118/2: RNCC: 5 | RNVC: 2
TL5130-0118/2: RNCC: 5 | RNVC: 2
PS-10A MZUB IM KASTEN: RNCC: 5 | RNVC: 9
TL5130-0118: RNCC: 5 | RNVC: 9
TL5130-0118: RNCC: 5 | RNVC: 9
5130-01350: RNCC: 6 | RNVC: 9

1 Dec 1987

5130-15-132-7278
Trapano Pneumatico

151327278
MF8P: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-12-373-2362
Crimping Tool Die

123732362
R2216: RNCC: 3 | RNVC: 2

11 Oct 2007

5130-15-214-6061
Nose Huck

152146061
99600: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-21-108-8576

5130-98-204-2672
Abrasive Disk

982042672
3718022: RNCC: 3 | RNVC: 2

4 Aug 1994

5130-15-220-4374
Seghetto Alternativ

152204374
PST54: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-101-6774
Martello Demolitore

151016774
BRH-40: RNCC: 3 | RNVC: 2

25 Jun 1988

5130-15-139-8898
Trapano Pneumatico

151398898
FZ31-90: RNCC: 3 | RNVC: 2

10 Oct 1996

5130-12-131-4636
Power Tool Screwdriver Bit Holder

121314636
95-QF-8S: RNCC: 3 | RNVC: 9
K7809HGR1: RNCC: 5 | RNVC: 2
9369174: RNCC: 5 | RNVC: 2
182SWF-4: RNCC: 5 | RNVC: 9
123278: RNCC: 5 | RNVC: 9
7809H2: RNCC: 5 | RNVC: 9

30 May 1969

5130-14-563-7753
Portable Pneumatic Drill

145637753
V.102MF: RNCC: 3 | RNVC: 2
0788686: RNCC: 5 | RNVC: 2
3148517886865: RNCC: 5 | RNVC: 2

12 Mar 2010

5130-12-365-0164
Electric Portable Circular Saw

123650164
60054100: RNCC: 3 | RNVC: 2
KSE 55 PLUS: RNCC: 5 | RNVC: 2
6.00541.00: RNCC: 5 | RNVC: 9

23 Nov 2004

5130-14-457-0515
Boitier

144570515
303-518: RNCC: 3 | RNVC: 2

5 Aug 1992

5130-99-615-8917
Portable Tube Clean

996158917
229L65670-M00: RNCC: 3 | RNVC: 2

13 Feb 2003

5130-21-108-8700

5130-21-108-8708

5130-99-466-1535
Nut

994661535
J875: RNCC: 3 | RNVC: 2
4Q3123: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-15-002-7813
Pneumat Screwdriver

150027813
LTV48R120-L13: RNCC: 3 | RNVC: 2

2 Oct 2013

5130-15-211-3117
Trapano A Batteria

152113117
GSB9,6: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-220-5175
Trapano Elettrico F

152205175
T713APRE: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-99-209-3776
Sander Grinder Elec

992093776
4157: RNCC: 3 | RNVC: 1
CES39910: RNCC: 5 | RNVC: 2
4157-220/240VAC: RNCC: 5 | RNVC: 2

25 Apr 1991

5130-15-212-8003
Termosoffiatore Da

152128003
PHG630-2LCE: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-192-1029
Platorello

151921029
TP513: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-15-175-6683
Levigratice A Nastr

151756683
LN75: RNCC: 3 | RNVC: 2
513015E009421: RNCC: 5 | RNVC: 9

14 Feb 2004

5130-21-843-6838

5130-27-054-3139
Rotary End Wire Brush

270543139
SGO-VGF-25/11: RNCC: 2 | RNVC: 1

16 Aug 2011

5130-99-437-5919
Ch Pneumatic Hammer

994375919
NO PRIMARY REF 99-437-5919: RNCC: 3 | RNVC: 2
MODELNO2STANDARD: RNCC: 5 | RNVC: 2
0278-12643: RNCC: 6 | RNVC: 9

2 Feb 1976

5130-15-221-9434
Pistola Termica

152219434
HIG-3000-SLE: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-368-0378
Ro Pressbackensatz

123680378
HR4/70: RNCC: 3 | RNVC: 2

23 Nov 2005

5130-12-355-7808
Polishing And Rubbing Pad

123557808
VG95211-ML-123557808: RNCC: 2 | RNVC: 2
XS0034-9019-9: RNCC: 3 | RNVC: 2

13 Dec 2001

5130-15-218-0265
Spazzola A Tazza

152180265
TBU75-690M: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-176-0952
Staffa Di Fissaggio

151760952
3748/1-010: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-12-303-2013
Power Tool Screwdriver Bit Holder

123032013
05053725001: RNCC: 3 | RNVC: 2
60110004018: RNCC: 3 | RNVC: 2
053725: RNCC: 3 | RNVC: 9
892/8/1: RNCC: 5 | RNVC: 2
4014586165752: RNCC: 5 | RNVC: 2
6 01 10 004 01 8: RNCC: 5 | RNVC: 2
53725: RNCC: 5 | RNVC: 9
6 01 10 004 00 9: RNCC: 5 | RNVC: 9
60110004009: RNCC: 5 | RNVC: 9
K251: RNCC: 5 | RNVC: 9

6 Mar 1985

5130-14-281-5458

5130-99-201-6570

5130-22-608-0986
Screwdriver Bit

226080986
PZ2: RNCC: 3 | RNVC: 2

8 Sep 2004

5130-98-855-1584
Rotor

988551584
NO PRIMARY REF 98-855-1584: RNCC: 3 | RNVC: 2
67790: RNCC: 5 | RNVC: 2

9 Feb 1982

5130-99-277-5415

5130-99-443-2054
Valve Disc

994432054
NO PRIMARY REF 99-443-2054: RNCC: 3 | RNVC: 2
139160: RNCC: 5 | RNVC: 2
W2-89AW40110: RNCC: 6 | RNVC: 9

31 Jan 1983

5130-99-204-0906

5130-99-203-9182

5130-99-203-9171

5130-99-663-9479
Staples

996639479
P-08969: RNCC: 3 | RNVC: 2
P-08969: RNCC: 5 | RNVC: 2

21 Mar 2001

5130-12-391-0759
Portable Pneumatic Disk Sander

123910759
691131: RNCC: 3 | RNVC: 2
LEX 3 77/2,5: RNCC: 5 | RNVC: 2

22 Jan 2013

5130-15-000-2536
Kit Miniutensile Dr

150002536
8000-60: RNCC: 3 | RNVC: 2

13 Feb 2013

5130-15-125-9872
Trapano Elettronico

151259872
CSB850-2RLT: RNCC: 3 | RNVC: 2

8 Oct 1996

5130-12-126-1705
Anschlag

121261705
NO PRIMARY REF 12-126-1705: RNCC: 3 | RNVC: 2
24547: RNCC: 5 | RNVC: 9

30 May 1969

5130-15-165-8527
Smerigliatrice Da 1

151658527
TIP013234: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-21-906-1473
Hydraulic Puller

219061473
1396-61018: RNCC: 3 | RNVC: 2

29 Sep 1989

5130-99-513-7463

5130-99-201-1696

5130-66-146-6296
Electric Screwdriver

661466296
47422NIC-0545: RNCC: 3 | RNVC: 2
E4000: RNCC: 5 | RNVC: 2

6 Jul 2000

5130-99-204-7464
Por Electric Hammer

992047464
NO PRIMARY REF 99-204-7464: RNCC: 3 | RNVC: 2
P37994-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5130-14-573-2097
Portable Electric Drill

145732097
GSB21-2RCT: RNCC: 3 | RNVC: 2
GSB21-2RCT: RNCC: 5 | RNVC: 2
91919405: RNCC: 5 | RNVC: 2

24 Sep 2012

5130-15-237-4865
Supporto Per Trapan

152374865
513015E046599: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-12-167-8815
Abzieher Buchse

121678815
26-21C1031G003P06: RNCC: 3 | RNVC: 2

31 Jan 1977

5130-22-600-1618
Portable Electric Drill

226001618
00053180: RNCC: 3 | RNVC: 2
BE521S-R/L: RNCC: 3 | RNVC: 2
B480S: RNCC: 5 | RNVC: 2

4 Jun 2002

5130-15-137-8264
Trapano A Percussio

151378264
1092/1: RNCC: 3 | RNVC: 2

10 Oct 1996

5130-12-343-6448
Electric Metal Cutting Shears

123436448
S350-2: RNCC: 3 | RNVC: 2

10 Jul 1997

5130-12-328-3676
Sanding Drum

123283676
GK1325-6: RNCC: 3 | RNVC: 2

9 May 1992

5130-41-000-1293
Hydraulic Cutter Blade

410001293
180645.9: RNCC: 3 | RNVC: 2

18 Jul 2006

5130-12-186-0524
Fuehrung

121860524
00729/4: RNCC: 3 | RNVC: 2
00729-4: RNCC: 5 | RNVC: 2
00729/4: RNCC: 5 | RNVC: 2

27 Nov 1980

5130-14-305-3137
Electric Portable Reciprocating Saw

143053137
NO PRIMARY REF14-305-3137: RNCC: 3 | RNVC: 2
50C: RNCC: 5 | RNVC: 9

1 Jan 1974

5130-99-167-4901
Cordle Hammer Drill

991674901
NO PRIMARY REF 99-167-4901: RNCC: 3 | RNVC: 2
0601937442: RNCC: 5 | RNVC: 2
BOSCH-GSB12VSP-2 B & H 05-5618: RNCC: 5 | RNVC: 2
B184-TT7777973: RNCC: 6 | RNVC: 9

10 Jun 2002

5130-99-977-8293
Riffler

5130-99-207-6211

5130-99-207-6015

5130-66-149-8484
Screwdriver Bit

661498484
NO PRIMARY REF 66-149-8484: RNCC: 3 | RNVC: 2
02616612: RNCC: 5 | RNVC: 2

9 Apr 2003

5130-14-357-0733
Visseuse Clabot

143570733
22612: RNCC: 3 | RNVC: 2

7 Jun 1979

5130-15-136-5606
Raccordo - Femmina

151365606
K8564D: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-15-212-4209
Avvitatore Skill

152124209
2590: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-306-9795
Electric Nut Runner And Screwdriver

123069795
NO PRIMARY REF 12-306-9795: RNCC: 3 | RNVC: 2
0601921803: RNCC: 5 | RNVC: 9
0601921903: RNCC: 5 | RNVC: 9
0601997237: RNCC: 5 | RNVC: 9
GSR9,6 VE: RNCC: 5 | RNVC: 9

23 Apr 1986

5130-12-314-7148
Portable Electric Oscillating Pad Sander

123147148
NO PRIMARY REF 12-314-7148: RNCC: 3 | RNVC: 2
VSS 280: RNCC: 5 | RNVC: 2
VSS280 MIT LOCHSTANZE: RNCC: 5 | RNVC: 2

2 Aug 1988

5130-99-051-5057
Portable Pneumatic Hammer

990515057
NO PRIMARY REF 99-051-5057: RNCC: 3 | RNVC: 2
8426 1109 25: RNCC: 5 | RNVC: 2
RRH 04P-12: RNCC: 5 | RNVC: 2

12 Mar 1992

5130-15-194-6218
Decespugliatore A Z

151946218
RM-510ES: RNCC: 3 | RNVC: 2
(241)AJ770RM-510ES: RNCC: 5 | RNVC: 2

14 Dec 2010

5130-25-105-1177
Pneumatic Metal Cutting Shears

251051177
NO PRIMARY REF25-105-1177: RNCC: 3 | RNVC: 2
8100-53647NL: RNCC: 5 | RNVC: 2

1 Jan 1984

5130-15-190-9149
Trapano A Pistola

151909149
8201030: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-15-132-8300
Trapano A Percussio

151328300
10HM2P: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-14-208-5650
Poignee Fermee

142085650
F: RNCC: 3 | RNVC: 2
TD1094: RNCC: 3 | RNVC: 2

1 Jan 1964

5130-15-165-8722
Spazzola Rotante A

151658722
965980X20: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-14-435-6351
Rotary Driven Masonry Drill

144356351
52557/6: RNCC: 3 | RNVC: 2

14 Nov 1989

5130-33-108-3192
Pneumatic Metal Cutting Shears

331083192
SP06510: RNCC: 3 | RNVC: 2

13 Feb 2001

5130-98-855-1594
Shouldered Shaft

988551594
NO PRIMARY REF 98-855-1594: RNCC: 3 | RNVC: 2
700519: RNCC: 5 | RNVC: 2

12 Feb 1982

5130-17-052-9291
Portable Electric Drill

170529291
00-502-115V: RNCC: 3 | RNVC: 2
WB E 500 115V: RNCC: 5 | RNVC: 2

16 Nov 1982

5130-66-150-1187
Portable Electric Drill

661501187
NO PRIMARY REF 66-150-1187: RNCC: 3 | RNVC: 2
08405416: RNCC: 5 | RNVC: 2

18 Jun 2003

5130-99-209-3461

5130-99-214-7042

5130-14-323-4340
Meule Pneumat Butee

143234340
NO PRIMARY REF14-323-4340: RNCC: 3 | RNVC: 2
13455: RNCC: 5 | RNVC: 9

1 Jan 1975

5130-15-230-4456
Sega Circolare Hss

152304456
2828/5-315: RNCC: 3 | RNVC: 2
513015E102652: RNCC: 5 | RNVC: 9

19 Jul 2007

5130-12-363-3135
Reciprocating Saw Blade

123633135
486561: RNCC: 3 | RNVC: 2
HW75/4,5: RNCC: 5 | RNVC: 2

25 May 2004

5130-99-465-9901
Machin Rotary Brush

994659901
NO PRIMARY REF 99-465-9901: RNCC: 3 | RNVC: 2
N109: RNCC: 5 | RNVC: 2
3B2449: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-12-192-5487
Pneumatic Tool Rivet Set

121925487
DK42X4,8X100LN29757: RNCC: 2 | RNVC: 2
DK42X4-8X100LN29757: RNCC: 5 | RNVC: 2

4 May 1982

5130-12-324-8611
Pneumatic Nut Runner And Screwdriver

123248611
88RSAPT-2CQ: RNCC: 3 | RNVC: 2
220 302: RNCC: 5 | RNVC: 9

28 Mar 1991

5130-15-218-9086
Graffiatrice Aria C

152189086
8416E: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-176-4258
Smerigliatrice

151764258
DB125: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-99-996-2181
Vertical Portable Drill Stand

999962181
J90246: RNCC: 3 | RNVC: 2

13 Jan 2010

5130-17-124-6433
Pneumatic Blind Riveter

171246433
X-GRIP N10QI: RNCC: 3 | RNVC: 2

27 Nov 2012

5130-15-189-9624
Trapano Avvitatore

151899624
BS14XLI: RNCC: 3 | RNVC: 2

1 Mar 2010

5130-15-214-7363
Fresa A Corona

152147363
OXR150: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-165-8711
Trapano A Colonna

151658711
25MG: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-22-120-9416
Rotary Driven Masonry Drill

221209416
33 220460 1: RNCC: 3 | RNVC: 2

27 Sep 1983

5130-12-336-2820
Portable Electric Oscillating Pad Sander

123362820
00 328+31 235: RNCC: 3 | RNVC: 2

7 Nov 1994

5130-15-206-4668
Trapano A Percussio

152064668
3404548: RNCC: 3 | RNVC: 2
(241)AD3493404548: RNCC: 5 | RNVC: 2

12 Jun 2012

5130-15-001-0165
Seghetto Alternativ

150010165
4351T: RNCC: 3 | RNVC: 2

14 May 2013

5130-12-300-3239
Pneumatic Tool Rivet Set

123003239
104A-147: RNCC: 3 | RNVC: 2
104A3-16AN470: RNCC: 5 | RNVC: 2

25 Jul 1984

5130-12-341-6181
Schleifk Abdeckung

123416181
98A636/115: RNCC: 3 | RNVC: 2
01459102: RNCC: 5 | RNVC: 2

2 Oct 1996

5130-12-379-5400
Screwdriver Bit

123795400
05135093001: RNCC: 3 | RNVC: 2
840/4Z-7/64: RNCC: 5 | RNVC: 2

5 Aug 2009

5130-99-204-1622
Needle Holder

992041622
NO PRIMARY REF 99-204-1622: RNCC: 3 | RNVC: 2
117: RNCC: 5 | RNVC: 2

5 Sep 1979

5130-99-200-6902

5130-21-688-0062

5130-99-209-3756
P Pneumatic Grinder

992093756
NO PRIMARY REF 99-209-3756: RNCC: 3 | RNVC: 2
VG7: RNCC: 5 | RNVC: 9

25 Apr 1991

5130-12-171-8196
Portable Electric Hammer

121718196
5130-005: RNCC: 2 | RNVC: 9
EHUB10Y220MITZUB: RNCC: 3 | RNVC: 9
X043: RNCC: 5 | RNVC: 9
EW 576/2 G 26 MITZUB: RNCC: 5 | RNVC: 9
5130-00070: RNCC: 6 | RNVC: 9

18 Nov 1977

5130-15-192-9960
Cavatrice A Punta

151929960
CP250: RNCC: 3 | RNVC: 2
(241)A4373CP250: RNCC: 5 | RNVC: 2

1 Apr 2010

5130-15-172-9181
Trapano A Colonna B

151729181
TRAPANO A COLONNA BIMAK MOD.22/2: RNCC: 1 | RNVC: 2

1 Jun 2003

5130-12-368-0240
Tacker

123680240
6.03030.00: RNCC: 3 | RNVC: 2
TAE3030: RNCC: 5 | RNVC: 2

21 Nov 2005

5130-98-205-5570
Portable Electric Drill

982055570
DFAMPD00171 A: RNCC: 2 | RNVC: 2

3 Apr 2001

5130-15-002-8358
Trapano A Percussio

150028358
D21721K-QS: RNCC: 3 | RNVC: 2

8 Oct 2013

5130-15-176-0357
Trapano Angolare Pn

151760357
D315-L-TS: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-66-139-4123
Pneumat Needle Gun

661394123
12-B: RNCC: 3 | RNVC: 2
12-B: RNCC: 5 | RNVC: 2

31 Oct 1994

5130-15-192-9005
Avvitatore A Batter

151929005
6891DW: RNCC: 3 | RNVC: 2

26 Mar 2010

5130-66-150-5780
Abrasive Disk Holder Pad

661505780
NO PRIMARY REF 66-150-5780: RNCC: 3 | RNVC: 2
01051780: RNCC: 5 | RNVC: 2

17 Apr 2003

5130-14-316-7575
Guide Tete Rigide

143167575
875GH: RNCC: 3 | RNVC: 2
875GH: RNCC: 5 | RNVC: 1
85-595-7822: RNCC: 6 | RNVC: 9

1 Jan 1975

5130-15-216-1620
Trapano Stayer

152161620
TM368F: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-215-7637
Smerigliatrice A Sq

152157637
WSA1900: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-303-1897
Blindni Mundstueck

123031897
NPS 6: RNCC: 3 | RNVC: 2

4 Mar 1985

5130-22-258-5014
Cutting Tool

222585014
00016192: RNCC: 3 | RNVC: 2

22 Apr 2002

5130-21-895-4958
Portable Electric Router

218954958
7619-04: RNCC: 3 | RNVC: 2
315.17430: RNCC: 5 | RNVC: 9

12 Aug 1984

5130-14-327-2168
A Ma Riveuse Embout

143272168
NO PRIMARY REF14-327-2168: RNCC: 3 | RNVC: 2
35G16-1: RNCC: 5 | RNVC: 9
7160-0212: RNCC: 5 | RNVC: 9
85-599-1713: RNCC: 6 | RNVC: 9

2 Jul 1975

5130-12-192-8086
Pneumatic Tool Rivet Set

121928086
A2,4X12X4,75: RNCC: 3 | RNVC: 2
A2-4X12X4-75: RNCC: 5 | RNVC: 2

26 May 1982

5130-21-895-4246
Nose-Piece Collet

218954246
PRN-524: RNCC: 3 | RNVC: 2
PRN524: RNCC: 5 | RNVC: 2

20 Feb 1984

5130-99-124-4336
Rivet Nose Assembly

991244336
7220-2000: RNCC: 3 | RNVC: 2
3AP4321: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-99-124-1149
Pneumati Rivet Snap

991241149
BBH508-06: RNCC: 3 | RNVC: 2
0278-278041: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-66-152-6686
Hydraulic Puller

661526686
NALM00613-1: RNCC: 3 | RNVC: 2
H4096464-728G01: RNCC: 5 | RNVC: 9

22 Dec 2004

5130-15-174-6782
Oscilla Sander (1)

151746782
VSSE20: RNCC: 3 | RNVC: 2

29 Jul 2003

5130-12-192-5785
Reciprocating Saw Blade

121925785
6 35 03 060 01 0: RNCC: 3 | RNVC: 2
63503060010: RNCC: 5 | RNVC: 2

5 May 1982

5130-17-055-8633
Powder Actuated Projectile Unit Driver

170558633
DX450 Z/TOEBEHOREN: RNCC: 3 | RNVC: 2
DX450: RNCC: 5 | RNVC: 1

11 Mar 1985

5130-15-165-8525
Smerigliatrice Da 1

151658525
06013234: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-25-141-0237
Portable Electric Belt Sander

251410237
ELU-MHB157: RNCC: 5 | RNVC: 2
0345-625-8: RNCC: 5 | RNVC: 2

20 Feb 1992

5130-15-165-8678
Spazzola A Disco Do

151658678
11270010P10: RNCC: 3 | RNVC: 2

1 Nov 2002

5130-21-895-4552
Socket Wrench Socket

218954552
PMV5.5: RNCC: 3 | RNVC: 2
PMV5.5: RNCC: 5 | RNVC: 2

3 Jun 1984

5130-15-185-7747
Inserto Levigatore

151857747
1.43.05.03: RNCC: 3 | RNVC: 2

30 Dec 2008

5130-66-035-9631
Socket Wrench Socket

660359631
15836: RNCC: 3 | RNVC: 2
2041-5: RNCC: 5 | RNVC: 9

18 Jun 1970

5130-21-893-1073
Quick C Back-Up Pad

218931073
55774: RNCC: 3 | RNVC: 2

14 May 1983

5130-14-402-2875
Rotary End Wire Brush

144022875
5.67.21FILACIER0-2: RNCC: 3 | RNVC: 2
56721FILACIER0-2: RNCC: 3 | RNVC: 2
5-67-21FILACIER0-2: RNCC: 3 | RNVC: 2

28 Jun 1985

5130-25-131-4314
Luftdr Skruetrekker

251314314
US-40TB: RNCC: 3 | RNVC: 2
US-40TB: RNCC: 5 | RNVC: 2

1 Jan 1984

5130-12-383-4322
P Crimping Jaw Set

123834322
1.5104X: RNCC: 3 | RNVC: 2

20 Oct 2010

5130-12-133-6408
Auf Sicherungsstift

121336408
NO PRIMARY REF 12-133-6408: RNCC: 3 | RNVC: 2
115119: RNCC: 5 | RNVC: 9
K500-5: RNCC: 5 | RNVC: 9

30 May 1969

5130-98-205-3610
Socket Wrench Socket

982053610
DFAMPD00051/38MM: RNCC: 3 | RNVC: 2

14 Jun 2000

5130-15-181-6093
Serie 8 Microgiravi

151816093
SERIE 8: RNCC: 3 | RNVC: 2

19 Dec 2008

5130-99-228-4181
Abrasive Wheel

992284181
KT-103-134: RNCC: 3 | RNVC: 2

29 Jun 2012

5130-21-886-6721
Reciprocating Saw Blade

218866721
48-00-1184: RNCC: 3 | RNVC: 2

21 Sep 1981

5130-21-102-7095
Horizontal Pneumatic Grinder

211027095
8343-AL4: RNCC: 3 | RNVC: 1
4G: RNCC: 3 | RNVC: 2
45GP3: RNCC: 4 | RNVC: 1
UG-2000L-45: RNCC: 5 | RNVC: 2
UG-2000G-45: RNCC: 5 | RNVC: 2
7010A: RNCC: 5 | RNVC: 9
502442-2: RNCC: 6 | RNVC: 9

4 Jun 1968

5130-21-889-5265
Socket Wrench Adapter

218895265
10004: RNCC: 3 | RNVC: 2
IM35: RNCC: 3 | RNVC: 2
PA7-8: RNCC: 5 | RNVC: 2
1M35: RNCC: 5 | RNVC: 2
10004: RNCC: 5 | RNVC: 2

2 May 1982

5130-15-212-3552
Punta A Tazza Per L

152123552
UMSTH26: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-210-4979
Smerigliatrice A Sq

152104979
WSE1200M: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-205-4709
Avvitatore Pneumati

152054709
MW-5125V1: RNCC: 3 | RNVC: 2
(241)AG330MW-5125V1: RNCC: 5 | RNVC: 2

13 Mar 2012

5130-22-210-7455
Emery Wheel

222107455
9715 7609-00: RNCC: 3 | RNVC: 2

26 Jun 1984

5130-13-006-2012
Portable Electric Drill

130062012
EWUBJ54-19-220: RNCC: 3 | RNVC: 2

1 Apr 1975

5130-98-855-1737
Motor Cover

988551737
NO PRIMARY REF 98-855-1737: RNCC: 3 | RNVC: 2
3071: RNCC: 5 | RNVC: 2

15 Feb 1982

5130-12-383-2228
Portable Electric Grinder

123832228
722111: RNCC: 3 | RNVC: 2
WSB25-230X: RNCC: 5 | RNVC: 2

27 Sep 2010

5130-15-215-5361
Testata

152155361
H652-8MB: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-99-539-9122
Rotary Wheel Wire Brush

995399122
ECH24-16: RNCC: 3 | RNVC: 2

25 Apr 1991

5130-14-524-9493
Perceuse A Percussi

145249493
NO PRIMARY REF145249394: RNCC: 3 | RNVC: 2
TP1211: RNCC: 5 | RNVC: 2
3255660085097: RNCC: 5 | RNVC: 2

4 May 2001

5130-12-347-0824
Fuehrungs Anschlag

123470824
1608190007: RNCC: 3 | RNVC: 2
2608 190 002: RNCC: 5 | RNVC: 2
2608 190 002: RNCC: 5 | RNVC: 9
1 608 190 007: RNCC: 5 | RNVC: 9

23 Oct 1998

5130-15-175-7850
Trapano A Percussio

151757850
T 705 PRE: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-15-236-3424
Mandrino A Corona D

152363424
35035: RNCC: 3 | RNVC: 2
513015E066302: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-15-217-7171
Dischi A Molare

152177171
D115X16: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-136-2261
Trapano A Percussio

151362261
BD155RT: RNCC: 3 | RNVC: 2

9 Oct 1996

5130-15-181-6097
Saldatore A Dopia P

151816097
SALDATORE A DOPPIA: RNCC: 3 | RNVC: 2

19 Dec 2008

5130-14-280-1936
Outil A 3 Molettes

142801936
124STM10-42MM: RNCC: 2 | RNVC: 2

1 Jan 1971

5130-15-175-6552
Levigatrice A Nastr

151756552
LN300: RNCC: 3 | RNVC: 2

14 Feb 2004

5130-15-212-1987
Trapano Variabile R

152121987
PERLES13: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-216-9207
Minitrapano Hobby D

152169207
M0D800: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-22-624-2933
Portable Cylindrical Bore Honing Unit

226242933
1657052-4.0: RNCC: 3 | RNVC: 2

29 Aug 2012

5130-15-236-4993
Martello Pneumatico

152364993
0S501-P: RNCC: 3 | RNVC: 2
513015E104560: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-33-210-4862
Power Hammer Tube Flaring Punch

332104862
B4004X028074-MAM-1: RNCC: 3 | RNVC: 2

11 Oct 2012

5130-15-208-9354
Seghetto Alternativ

152089354
1582-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-15-172-9184
Trapano A Percussor

151729184
TRAPANO A PERCUSSORE HILTI MOD.S: RNCC: 1 | RNVC: 2

1 Jun 2003

5130-99-454-1793
Rotary W Wire Brush

5130-15-213-3079
Trapano Elettrico A

152133079
GSB-18-RE: RNCC: 3 | RNVC: 2

16 Nov 2005

5130-12-357-4766
Portable Hydraulic Cutter-Spreader

123574766
84150/6250: RNCC: 3 | RNVC: 2
LKS30: RNCC: 5 | RNVC: 2

25 Jun 2002

5130-99-924-2824
Applicato Cartridge

999242824
NO PRIMARY REF 99-924-2824: RNCC: 3 | RNVC: 2
950C6: RNCC: 5 | RNVC: 9
0278-18365: RNCC: 6 | RNVC: 9
0278-924-2824: RNCC: 6 | RNVC: 9

25 Apr 1991

5130-12-381-8424
Socket Wrench Adapter

123818424
MXT3-11 SGA-DDW: RNCC: 3 | RNVC: 2

9 Apr 2010

5130-12-129-3194
Pneumatic Impact Wrench

121293194
5130-0032MZUB: RNCC: 2 | RNVC: 2
SA14MZUB: RNCC: 3 | RNVC: 2
5130-032MZUB: RNCC: 5 | RNVC: 9
5130-60176: RNCC: 6 | RNVC: 9

30 May 1969

5130-15-124-0729
Disco Per Troncatri

151240729
5415-250: RNCC: 3 | RNVC: 2

8 Oct 1996

5130-99-716-5599
Collet Blank

997165599
NO PRIMARY REF 99-716-5599: RNCC: 3 | RNVC: 2
2582: RNCC: 5 | RNVC: 2

25 Apr 1991

5130-66-150-5786
Abrasive Disk Holder Pad

661505786
NO PRIMARY REF 66-150-5786: RNCC: 3 | RNVC: 2
01711356: RNCC: 5 | RNVC: 2

15 Apr 2003

5130-99-969-6224
Steel Na Fixing Kit

999696224
DGM/1586 ITEM 11.2: RNCC: 3 | RNVC: 2

28 Oct 2010

5130-12-141-9679
Socket Wrench Socket

121419679
K7801Z-13/16: RNCC: 3 | RNVC: 2
K-13/16AF: RNCC: 3 | RNVC: 2
7314151844608: RNCC: 5 | RNVC: 2
4010886616840: RNCC: 5 | RNVC: 2
6168420: RNCC: 5 | RNVC: 2
45390: RNCC: 5 | RNVC: 9
790C-13/16: RNCC: 5 | RNVC: 9
23410042: RNCC: 5 | RNVC: 9

30 May 1969

5130-15-209-0497
Chiodatrice A Massa

152090497
BOSS128: RNCC: 5 | RNVC: 3

16 Nov 2005

5130-15-234-7058
Smerigliatrice Da B

152347058
126: RNCC: 3 | RNVC: 2
B.17: RNCC: 3 | RNVC: 2
513015E053262: RNCC: 5 | RNVC: 9

27 Aug 2007

5130-66-129-0891
Pneumatic Impact Wrench

661290891
8434 1643 00: RNCC: 3 | RNVC: 2
W 2225: RNCC: 5 | RNVC: 2

28 Jul 1987

5130-22-613-6822
Polishing And Rubbing Pad

226136822
114-5: RNCC: 3 | RNVC: 2

12 Jul 2006

5130-15-218-2629
Mandrino Autoblocca

152182629
1.608.572.003: RNCC: 3 | RNVC: 2

16 Nov 2005

Load More Results