5120-01-542-7830

3040-01-708-8264Rigid Connecting Link3040017088264 017088264 1706-136-PART-NO-124 1706-50-PART-NO-37 709
-4403687-PART-NO-37 709-4554791-PART-NO-124 An item of various cross-sectional shapes which may be of

698-2278 Socket Wrench Screwdriver Attachment J4990-7XLRNCC: 3 | RNVC: 2 | DAC: 3 4 Nov 2021 5120-01-542-7830

3020-01-300-0791 3020013000791 013000791 is a gear, cylindrical in form, with spiral teeth designed to mesh with the thread forms of a gear (1), worm. see also gear, antibacklash, worm wheel.

3040-01-300-0778 3040013000778 013000778 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

5998-01-626-0037 5998016260037 016260037 is a grouping of two or more different types of electrical/electronic components mounted on a common mounting. it may include an assembly of electrical/electronic components mounted on multiple printed wiring board(s) mounted back to back, stacked, and the like. the item is generally a component of a subassembly and cannot be assigned a more definite item name. excludes items which may be identified as a subassembly. for an assembly of electrical/electronic components mounted on a single printed wiring board, see circuit card asseembly. do not use if a more specific name applies.