5120-01-473-9281

475-7024 https//www.nsnlookup.com /cage Apex Tool Group, Llc (CAGE Code 65LN0) 4 12 Aug 1996 5120-01-473-9281

7640-27-031-1883 7640270311883 270311883 is a sheet or plate representing on a plain surface all or part of earth's surface, showing physical, natural, statistical and/or political features, or division. excludes chart; chart, recording instrument; plate, instruction; and sheet, technical.

7640-27-030-1826 7640270301826 270301826 is a sheet or plate representing on a plain surface all or part of earth's surface, showing physical, natural, statistical and/or political features, or division. excludes chart; chart, recording instrument; plate, instruction; and sheet, technical.

5365-01-499-0324 5365014990324 014990324 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.

| DAC: 4 12 Aug 1996 5110-01-434-9804 Hand File 03665RNCC: 3 | RNVC: 2 | DAC: 4 12 Aug 1996 5120-01-473-9281