5120-01-436-2922

5995-12-131-3289 5995121313289 121313289 is a definite length of one-conductor electrical wire, wire braid, or other conductive material, except cable or cord, one or both ends of which are processed or terminated. the lead may be of any size or shape, insulated or uninsulated. see also lead, test and bus conductor. excludes lead, storage battery; lead, ignition, engine, and items having attached switches, lampholders, suppressors, resistors, and the like.

5995-12-131-3285 5995121313285 121313285 is a definite length of one-conductor electrical wire, wire braid, or other conductive material, except cable or cord, one or both ends of which are processed or terminated. the lead may be of any size or shape, insulated or uninsulated. see also lead, test and bus conductor. excludes lead, storage battery; lead, ignition, engine, and items having attached switches, lampholders, suppressors, resistors, and the like.

DAC: 4 19 Apr 2000 5120-01-367-3698 Hand Hammer 11-527RNCC: 3 | RNVC: 9 | DAC: 4 10 Nov 1992 5120-01-436-2922

10 Apr 1997 5120-01-437-5263 Slip Joint Pliers INPA12RNCC: 3 | RNVC: 2 | DAC: 4 17 Oct 1996 5120-01-436-2922

5365-01-042-1401 5365010421401 010421401 is a thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. it is designed to maintain a predetermined distance between two surfaces. for round items without a hole and having a solid rectangular cross-section use disk, solid, plain. items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. see also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.