5120-01-429-6476

349796RNCC: 3 | RNVC: 2 | DAC: 5LIT690161 PAGE 2, PART 349796RNCC: 5 | RNVC: 2 | DAC: 5 24 Sep 1982 5120-01-429-6476

1996 5120-01-429-6469 Fixed Open End Wrench Set 9-4403RNCC: 3 | RNVC: 2 | DAC: 4 15 Apr 1996 5120-01-429-6476

3040-34-039-2153 3040340392153 340392153 is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. a shaft is not included. it usually is part of a camshaft (as modified).

3020-34-039-2714 3020340392714 340392714 is a toothed wheel whose teeth or sprockets are designed to be engaged with the links of a pitch chain, track, or the like. it is usually used for transmitting power.

5310-34-039-2657 5310340392657 340392657 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.