5120-01-361-9540

4810-99-663-9144 4810996639144 996639144 is an assembly of items consisting of two or more complete valves on a common mounting; mounted on each other; or joined together with fitting(s), hose(s), tube(s), pipe(s), or the like. for items consisting of two or more valves in a common body, see valve assembly, manifold.

4810-99-437-9561 4810994379561 994379561 is an assembly of items consisting of two or more complete valves on a common mounting; mounted on each other; or joined together with fitting(s), hose(s), tube(s), pipe(s), or the like. for items consisting of two or more valves in a common body, see valve assembly, manifold.

4320-99-791-4389 4320997914389 997914389 PUMP,WATER CIRCULAT

4320-99-808-0757 4320998080757 998080757 ROTATING ASSEMBLY,P

5310-99-051-1255 5310990511255 990511255 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.