5120-01-016-5149

5310-01-160-2047 5310011602047 011602047 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5120-01-019-4506 Electrical Contact Inserter 356-400-2RNCC: 3 | RNVC: 2 | DAC: 4 15 Apr 1976 5120-01-016-5149

Jan 1963 5998-01-059-7399 Circuit Card Assembly 860712-1RNCC: 3 | RNVC: 2 | DAC: 5 15 Apr 1978 5120-01-016-5149

6620-00-535-1396 6620005351396 005351396 BASE AND RECEPTACLE ASSEMBLY

2510-01-156-9996 2510011569996 011569996 SPRING AND SADDLE ASSEMBLY