5120-00-513-0223

(CAGE Code 06848) 4 26 Feb 1969 5120-00-513-0223 Open End Wrench 2552167RNCC: 3 | RNVC: 2 | DAC: 4 3

2920-22-255-2167 2920222552167 222552167 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

DAC: 2 2 Nov 1982 5220-00-400-1339 Profile Gage 2550654RNCC: 3 | RNVC: 2 | DAC: 4 26 Feb 1969 5120-00-513-0223

2167Electrical Special Purpose Cable Assembly5995992552167 992552167 5380 5380-1 005380 3NC 79929 4XV/2552167
2 5380 K7999 - Ministry Of Defence (Procurement (Obsolete) NATO Reference RNCC 6 RNVC 9 DAC 2 4XV/2552167

2920-22-125-9049 2920221259049 221259049 is a switch which is externally actuated by a device such as a key/cylinder lock to actuate a remote lever or rod rack to activate a remote switch. the actuation device may or may not be an integal part of the switch. the primary purpose of the switch is to open and close the ignition circuit of an internal combustion engine and actuate various accessories. excludes switch, engine starter, electrical and switch, lock.