5120-00-391-0106

5310-01-549-1417 5310015491417 015491417 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

RNVC: 9 | DAC: 1 1 Jan 1963 5340-00-395-2961 Bumper 740-1RNCC: 5 | RNVC: 2 | DAC: 3 12 Apr 1974 5120-00-391-0106

8455-01-523-0054 8455015230054 015230054 is an insignia to be affixed on the upper extremity of the sleeve to indicate an organization, theater of operation, force, or the like.excludes insignia, grade, enlisted personnel; badge, rating; shoulder mark and group-rate mark.