5120-00-340-2010

DAC: X 1 Jan 1961 5940-00-204-8051 Stud Terminal 72626RNCC: 5 | RNVC: 9 | DAC: X 1 Jan 1963 5120-00-340-2010

4820-14-243-1358 4820142431358 142431358 CORPS ROBINET EQUIP

| DAC: 4 1 Jan 1963 5120-00-277-1611 Box Wrench 2618SWRNCC: 5 | RNVC: 9 | DAC: 4 1 Jan 1963 5120-00-340-2010

5310-01-626-2745 5310016262745 016262745 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5998-01-148-1947 5998011481947 011481947 is an insulating panel upon which completely processed electrical conductor paths are deposited, etched, or printed in various patterns to provide or complete a circuit between two or more points. it may provide contacts for plug-in connecting facilities. it may be designed for panel or chassis mounting, or for insertion into a connector, receptacle, electrical. for items containing printed electronic components, see printed circuit board. for items containing separately manufactured electronic components, see circuit card assembly. for items consisting only of electrical conductor paths and two or more connectors, see backplane assembly.