What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

What is an Automatic Center Punch?

An Automatic Center Punch (PUNCH,CENTER,AUTOMATIC) is a spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

What is a Friction Igniter?

A Friction Igniter (IGNITER,FRICTION) is an item having a file and flint at one end which when rubbed together produce a spark.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

What is a Wood Caulking Iron?

A Wood Caulking Iron (CAULKING IRON,WOOD) is refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND; HAWSING IRON and YARNING IRON.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is an Edge Grip Sheet Metal Holder?

An Edge Grip Sheet Metal Holder (HOLDER,SHEET METAL,EDGE GRIP) is a U-shaped, center lever grip clamping device or a forceps operated, spring loaded clamping device designed to grip edges of two or more sheet metal parts in order to position, align, and/or hold the parts together.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Furnace And Flue Wire Brush?

A Furnace And Flue Wire Brush (BRUSH,WIRE,FURNACE AND FLUE) is an item having a wire fill section of varying cross-sectional shapes securely twisted in a stem wire which is extended to form a handle, or it has a means for attaching a handle.

What is a Boiler Tube Wire Brush?

A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

Hand Tools, Nonedged, Nonpowered - United States (US)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United States (US) - NCB is 00 to 09

Page 43 of 346

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United States

51	20	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United States (US)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 36 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 26 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is an Automatic Center Punch? 21 Items: An Automatic Center Punch (PUNCH,CENTER,AUTOMATIC) is a spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.
What is a Hand Vise? 16 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 44 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 192 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 406 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 1137 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 53 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Fuller,Bottom,Blacksmith's 11 Items
Swage,Bottom,Blacksmith's 22 Items
What is a Hand Tube Flaring Tool? 123 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 14 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 35 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 86 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 44 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 4056 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 14 Items
What is a Pipe Wrench? 269 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 863 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 241 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 31 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 131 Items
What is a Screwdriver Bit? 1696 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 88 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 7801 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 2682 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1038 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 89 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 836 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 14 Items
What is a Hand Tube Bender? 95 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1505 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 441 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Friction Igniter? 15 Items: A Friction Igniter (IGNITER,FRICTION) is an item having a file and flint at one end which when rubbed together produce a spark.
What is a Pinch Bar? 66 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 138 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 37 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 30 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 565 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Wood Caulking Iron? 12 Items: A Wood Caulking Iron (CAULKING IRON,WOOD) is refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND; HAWSING IRON and YARNING IRON.
What is a Pliers? 818 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 23 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 215 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 20 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 239 Items
What is an Edge Grip Sheet Metal Holder? 19 Items: An Edge Grip Sheet Metal Holder (HOLDER,SHEET METAL,EDGE GRIP) is a U-shaped, center lever grip clamping device or a forceps operated, spring loaded clamping device designed to grip edges of two or more sheet metal parts in order to position, align, and/or hold the parts together.
What is a Hole Sheet Metal Holder? 119 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Furnace And Flue Wire Brush? 25 Items: A Furnace And Flue Wire Brush (BRUSH,WIRE,FURNACE AND FLUE) is an item having a wire fill section of varying cross-sectional shapes securely twisted in a stem wire which is extended to form a handle, or it has a means for attaching a handle.
What is a Boiler Tube Wire Brush? 11 Items: A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.
What is a Screwdriver And Wrench Assembly? 32 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 61 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 24 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
Swaging Tool,Flexible Cable Terminal 20 Items
What is a Hand Nail Puller? 17 Items: A Hand Nail Puller (PULLER,NAIL,HAND) is a hand-held, hand-operated device, consisting of a handle fixed to a rammer which slides along a shaft having one pivoted jaw. The overall length may vary from 17 to 20 inches (431.8 to 508.0 millimeters) long.
Mattock 20 Items
What is a Socket Wrench Handle Bar? 53 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 17 Items
Riveter,Blind,Hand 124 Items
What is a Hand Shovel? 79 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 35 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 23 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Hand Storage Battery Carrier? 26 Items: A Hand Storage Battery Carrier (CARRIER,STORAGE BATTERY,HAND) is an item used to transport a battery in level position and provide positive placement control. It may consist of straps with battery post grips or adjustable tong type brackets with handles and battery case gripping jaws. It is designed to facilitate safe handling of a BATTERY, STORAGE and prevent breakage and accidental contact with spilled acid.
Block,Dolly,Sheet Metalworking 24 Items
What is a Piston Ring Compressor? 118 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Pike Pole? 19 Items: A Pike Pole is a hand tool consisting of a wood handle with a steel pike, with or without hook, secured on one end.
What is a Fuse Puller? 39 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Timber Wedge? 13 Items: A Timber Wedge (WEDGE,TIMBER) is refer to Reference Drawing Group AD before using item name.
What is a Hand Lead Seal Press? 15 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
Tamper,Hand 11 Items
What is a Hand Hammer? 1107 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Concrete Edger? 11 Items: A Concrete Edger (EDGER,CONCRETE) is a hand tool with a turned side edge having a specified radius at the bend. The handle is attached to the flat surface of the tool. An edger with the side edge turned up is considered an "inside type" whereas an edger with the side edge turned down is considered an "outside type." The end(s) may be curved or straight. It is used for finishing the edges of concrete sidewalks, paving, curbs and the like. See also CORNER TOOL, CONCRETE.
What is a Lamp Extractor? 47 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 24 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Hand Sleeve Bearing Burnisher? 15 Items: A Hand Sleeve Bearing Burnisher (BURNISHER,SLEEVE BEARING,HAND) is a tool designed for smoothing out the bore of a cylindrical bearing.
Jointer,Brick 16 Items
What is a Hand Pipe And Sewer Auger? 22 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 40 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 51 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Lubrication Fitting Tool? 12 Items: A Lubrication Fitting Tool is a combination tool having an extracting and rethreading tap acting as a T-handle, with double end socket wrench, to remove worn or broken high-pressure grease fittings.
What is a Stuffing Box And Pump Packing Extractor? 14 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Hand Abrasive Wheel Dresser? 41 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is an Engine Valve Seat Insert Knockout Tool? 13 Items: An Engine Valve Seat Insert Knockout Tool (KNOCKOUT TOOL,ENGINE VALVE SEAT INSERT) is a tool with an offset point so designed that when the point is placed against the portion of a valve seat insert, a hammer blow will remove the insert.
Replacing Tool,Engine Valve Seat Insert 20 Items
What is a Rivet Bucking Bar? 317 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 202 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 955 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is an Electric Melting Pot? 22 Items: An Electric Melting Pot (POT,MELTING,ELECTRIC) is a pot of single or double wall construction, heated by self-contained electrical elements and used to melt soft metals and alloys, wax, glue, and the like.
What is a Woven Cable Grip? 159 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Caulking Gun Nozzle? 96 Items: A Caulking Gun Nozzle (NOZZLE,CAULKING GUN) is an item of various configurations and opening size(s) through which semisolid materials are dispensed. It is usually designed to be threaded onto the end cap of a hand held tool.
What is a Screw Thread Insert Extractor? 24 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Armature Wedge Driver? 15 Items: An Armature Wedge Driver (DRIVER,ARMATURE WEDGE) is a hand tool designed for inserting and driving a wedge into the armature core, or stator winding, when winding or rewinding an armature.
What is a Basin Wrench? 16 Items: A Basin Wrench (WRENCH,BASIN) is a sliding tee handled wrench with jaw(s) designed to exert a turning force about an axis parallel with the leg of the handle. It is adaptable for close quarters and is used for basin nuts, ball cocks, and flush valves.
What is a Wire Splicing Clamp? 12 Items: A Wire Splicing Clamp (CLAMP,WIRE SPLICING) is a tool designed for use in effecting a connection of bare electrical wires by twisting two wires together, or by twisting conductors contained in a single and/or double tube sleeve.
What is a Friction Igniter Flint Tip? 12 Items: A Friction Igniter Flint Tip (FLINT TIP,FRICTION IGNITER) is an item consisting of a flint and mounting device for use with an IGNITER, FRICTION.
What is an Electron Tube Extractor? 42 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 593 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
Screwdriver,Clutch Tip 10 Items
What is a Swivel Knob Jeweler's Screwdriver? 62 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 100 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 452 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 21 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 19 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 29 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is an Aligning Punch? 106 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 154 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 65 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 53 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 100 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 729 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Bung Wrench? 15 Items: A Bung Wrench (WRENCH,BUNG) is a nonadjustable wrench specifically designed to remove or replace threaded bung(s) on oil, gasoline, or solvent drums. Excludes WRENCH, SPANNER. See also WRENCH, DRAIN PLUG.
What is a Socket Wrench Ratchet Attachment? 51 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 44 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Socket Wrench Head Socket Adapter? 11 Items: A Crowfoot Socket Wrench Head Socket Adapter (ADAPTER,SOCKET,CROWFOOT SOCKET WRENCH HEAD) is an item with one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having a square external plug to fit into the internal square drive of a SOCKET, SOCKET WRENCH.
What is a Crowfoot Socket Wrench Head? 61 Items: A Crowfoot Socket Wrench Head (HEAD,CROWFOOT SOCKET WRENCH) is a component with a square internal drive eccentric to an open-wall opening designed to receive any of a series of wrenching sockets, adapters, or attachments. See also CROWFOOT ATTACHMENT, SOCKET WRENCH and SOCKET, CROWFOOT WRENCH HEAD.
What is a Crowfoot Wrench Head Socket? 77 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 1353 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 121 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 165 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 96 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2137 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 2750 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 310 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 1826 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 111 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 10 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 13 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Tube Fitting Wrenching Socket? 33 Items: A Tube Fitting Wrenching Socket (SOCKET,WRENCHING,TUBE FITTING) is an item specifically designed to remove and replace copper, brass, or similar soft metal fittings without damaging same.
What is a Hand Contact Burnisher? 31 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Pin Vise? 39 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Socket Head Screw Crowfoot Wrench Attachment? 16 Items: A Socket Head Screw Crowfoot Wrench Attachment (CROWFOOT WRENCH ATTACHMENT,SOCKET HEAD SCREW) is an attachment designed with a collar to fit into a HEAD, CROWFOOT SOCKET WRENCH having a hexagon plug (drive tang) extending therefrom.
What is a Tire Iron? 40 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 567 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 43 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Bench And Pipe Vise? 17 Items: A Bench And Pipe Vise (VISE,BENCH AND PIPE) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, each with integral or detachable pipe holding (serrated) jaws, and one or more guide bars or rods. Designed to be clamped or bolted to a bench, table or the like.
What is a Clamp Base Bench Vise? 14 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 108 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Prick Punch? 23 Items: A Prick Punch (PUNCH,PRICK) is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a tapered needlelike point which is ground to an included angle of approximately 25 degrees to 30 degrees. Excludes PUNCH, CENTER, SOLID; PUNCH, COPPERING.
What is a Nail Set? 39 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Ratcheting Crowfoot Wrench Set? 14 Items: A Ratcheting Crowfoot Wrench Set (WRENCH SET,CROWFOOT,RATCHETING) is a collection of various size SOCKET, CROWFOOT WRENCH HEAD; HEAD, CROWFOOT SOCKET WRENCH and handle(s). It may include universal joints, ratcheting adapters, and other attachments used therewith.
What is a Socket Wrench Set? 427 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 34 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 310 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 96 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 45 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Pin Straightener,Electron Tube 13 Items
What is a Spudger? 14 Items: A Spudger is a hand tool of nonconductive material with a conical point on one end and a chisel-like point on the other end. It is designed to locate or position electric leads in wired equipment.
What is a Wrench Kit? 53 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Scratch Awl? 43 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 83 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 173 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
Jack,Bumper 11 Items
Pick,Digging 13 Items
What is a Piston Ring Expander? 75 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Hand Electrical Conduit Bender? 33 Items: A Hand Electrical Conduit Bender (BENDER,ELECTRICAL CONDUIT,HAND) is a hand-actuated tool used for cold bending rigid electric conduit. It consists of a head having an opening to receive the conduit and has provision for attaching a pipe type handle. It may be furnished with or without a handle. Excludes benders for pipe, tube, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Mallet,Plastic 10 Items
Mallet,Rawhide 18 Items
Mallet,Rubber 20 Items
What is a Wood Mallet? 18 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 19 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 29 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Pneumatic Tire Valve Repair Tool? 13 Items: A Pneumatic Tire Valve Repair Tool (REPAIR TOOL,PNEUMATIC TIRE VALVE) is a four-way hand tool designed to repair valve stem cap threads, inside valve core threads, to smooth valve mouths, and to insert or remove valve cores for standard or large bore tire valves. See also INSERTER AND REMOVER, PNEUMATIC TIRE VALVE CORE.
What is a Hand Tube Swaging Tool Kit? 31 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Swaging Punch? 20 Items: A Hand Tube Swaging Punch (PUNCH,TUBE SWAGING,HAND) is a noncutting punchlike tool, having a formed shank on one end and a flared head on the other, designed for enlarging inside diameters of ductile metallic tubing to permit insertion of tubing of the same size. In use, the tool is driven into the end of tubing clamped in a tube flaring bar which is not included with this item. See also SWAGING TOOL KIT, TUBE, HAND.
What is a Jeweler's Staking Tool? 14 Items: A Jeweler's Staking Tool (STAKING TOOL,JEWELER'S) is an item consisting of a staking frame and die, having additional punches and stumps. The punches may or may not be inverted and used as stumps. Used to remove and/or replace wheel staffs and the like. Excludes FRICTION JEWELING KIT, JEWELER'S.
What is a Hand Tube Belling Punch? 12 Items: A Hand Tube Belling Punch (PUNCH,TUBE BELLING,HAND) is a noncutting punchlike tool having a shaped head on one end which is designed to bell out and solidly seat the ends of condenser tubes, evaporator tubes, and the like when the tube is installed in the tube sheet. It is generally used after the flaring operation.
What is a Hand Screw? 19 Items: A Hand Screw is a clamping device consisting of two wood or wood faced jaws, actuated by two, handled, metal or wood spindle screws. The spindle screws operate independently to permit the jaws to be set at an angle to each other.
What is a Hose Strap Band Clamping Tool? 18 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 46 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 3789 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 188 Items
What is a Hand Tube Bender Set? 10 Items: A Hand Tube Bender Set (BENDER SET,TUBE,HAND) is a group of BENDER, TUBE, HAND having different characteristics. See also BENDER SET, ELECTRICAL CONDUIT, HAND.
What is a Slip Joint Pliers? 363 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 29 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 476 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 105 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 494 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 180 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 83 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 30 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is a Torch And Regulator Wrench? 12 Items: A Torch And Regulator Wrench (WRENCH,TORCH AND REGULATOR) is a nonadjustable tool having multisize openings for turning mixing head nuts, hose connection nuts, cylinder connection nuts, and the like on welding and cutting outfits.
What is an Inspection Mirror? 177 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 31 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 59 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Hand Hydraulic Jack Kit? 25 Items: A Hand Hydraulic Jack Kit (JACK KIT,HYDRAULIC,HAND) is an item consisting of one or more JACK, HYDRAULIC, HAND with various attachments to harness the ram action for pulling, clamping, lifting, spreading, pressing and/or bending in addition to the pushing action of the hydraulic hand jack.
What is an Internal Gripping Pipe Wrench? 17 Items: An Internal Gripping Pipe Wrench (WRENCH,PIPE,INTERNAL GRIPPING) is a hand tool designed to be inserted into the end of nipples and pipes, and grip the inner surface by a cam or expansion action. It is used to turn items which may not protrude sufficiently to grip externally, or where an exterior plating or thread may not be marred. The tool is turned by applying a wrench to the protruding section.
What is a Flat Tip-Cross Tip Screwdriver? 13 Items: A Flat Tip-Cross Tip Screwdriver (SCREWDRIVER,FLAT TIP-CROSS TIP) is a manual screwdriver having a single, reversible blade with one flat tip and one cross tip. The item is designed to securely retain the blade in the handle, yet permit instantaneous removal and insertion.
What is a Drive Pin Punch Set? 46 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Drift Punch Set? 17 Items: A Drift Punch Set (PUNCH SET,DRIFT) is a group of PUNCH, DRIFT having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 11 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 66 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Hand Sheet Metal Pipe Crimping Tool? 20 Items: A Hand Sheet Metal Pipe Crimping Tool (CRIMPING TOOL,SHEET METAL PIPE,HAND) is a hand tool designed for contracting the ends of sheet metal pipe by crimping. The crimping roll type consists of a set of two crimping rolls which are rotated by means of two handles and a ratchet. The length of crimp is adjustable. The formed jaw type is a plierlike tool having two mating formed jaws which form a single indentation with each closing of the jaws upon the metal.
What is a Solid Center Punch? 111 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 19 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Brake Shoe Adjusting Tool? 23 Items: A Brake Shoe Adjusting Tool (ADJUSTING TOOL,BRAKE SHOE) is a bar of steel having flat, angled, blade ends designed to insert through the slot in a brake back plate to turn the brake shoe adjusting nut by a prying action.
What is a Hand Yoke Riveter? 60 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is an Electronic Equipment Tuning Wand? 13 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is an Inserted Hammer Face Holder? 110 Items: An Inserted Hammer Face Holder (HOLDER,INSERTED HAMMER FACE) is a HAMMER, HAND of the inserted face style, furnished without FACE, HAMMER, INSERTED.
What is a Combination Open End And Spanner Wrench? 34 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 25 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Cantilever Jaw Clamp? 13 Items: A Cantilever Jaw Clamp (CLAMP,CANTILEVER JAW) is a clamping device consisting of two L-shaped members, the long leg of one attached to, and pivots on, the long leg of the other member. Both short legs of each member terminate in freely rotating square pressure pads. One face of each pressure pad has a V-groove. The clamping operation is actuated by a screw which pivots on both members. It is used for holding round or flat objects with parallel or nonparallel surfaces.
What is a Hand Material Handling Hook? 15 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 102 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 250 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Spanner Wrench Handle? 33 Items: A Spanner Wrench Handle (HANDLE,SPANNER WRENCH) is a hand tool designed to mate with the threaded end of a spanner wrench or it is unthreaded and designed to slip onto the wrench. It is used to provide leverage.
What is a Combination Box And Open End Box Wrench? 46 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Combination Box And Open End Box Wrench Set? 12 Items: A Combination Box And Open End Box Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END BOX) is a group of WRENCH, BOX AND OPEN END BOX, COMBINATION having various sizes.
What is an Electrical Connector Pin Straightener? 19 Items: An Electrical Connector Pin Straightener (PIN STRAIGHTENER,ELECTRICAL CONNECTOR) is a hand tool designed with a longitudinal hole in one or both end(s) to fit over a pin contact of an electrical connector. It is used to straighten or align the contact(s) of the connector.
What is a Mechanical Puller Forcing Screw? 40 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 239 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 39 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 658 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Screwdriver Bit Extension? 24 Items: A Screwdriver Bit Extension (EXTENSION,SCREWDRIVER BIT) is an item having one end designed to fit into the end of a screwdriver bit handle and the opposite end designed to accommodate a screwdriver bit. It is specifically designed to extend the length of a screwdriver bit.
What is a Torque Wrench Multiplier? 125 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Bushing Driver Set? 63 Items: A Bushing Driver Set is a group of various sized bushing drivers designed to install and remove bushings. It may include driver nuts, adapters, and the like.
What is a Screw Thread Insert Tang Breakoff Tool? 62 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 33 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 394 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 858 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 71 Items
Handle,Shovel 12 Items
What is a Socket Wrench Spanner Attachment? 141 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Torque Wrench Set? 31 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 144 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 32 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Socket Wrench Spanner Attachment Set? 12 Items: A Socket Wrench Spanner Attachment Set (SPANNER ATTACHMENT SET,SOCKET WRENCH) is an item having an adjustable or fixed span of pin and/or key type ends that may be replacable.
What is a Bearing And Bushing Inserter Set? 21 Items: A Bearing And Bushing Inserter Set (INSERTER SET,BEARING AND BUSHING) is a group of two or more INSERTER, BEARING AND BUSHING having different characteristics.
What is a Bearing And Bushing Inserter? 1710 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 332 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 1086 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 111 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 405 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 830 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 182 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Preformed Packing Remover? 49 Items: A Preformed Packing Remover (REMOVER,PREFORMED PACKING) is a hand tool designed to remove a PACKING, PREFORMED.
What is a Drill Guide? 140 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Hand Fiber Optic Contact Crimping Tool? 12 Items: A Hand Fiber Optic Contact Crimping Tool (CRIMPING TOOL,FIBER OPTIC CONTACT,HAND) is a hand held tool designed to install various types of CONTACT, FIBER OPTIC on optical conductors.
What is a Connector Fiber Optic Contact Removal Tool? 23 Items: A Connector Fiber Optic Contact Removal Tool (REMOVAL TOOL,CONNECTOR FIBER OPTIC CONTACT) is an item used to disassemble CONTACT, FIBER OPTIC from a CONNECTOR, PLUG, FIBER OPTIC or a CONNECTOR, RECEPTACLE, FIBER OPTIC.
What is a Leveling-Support Jack? 322 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Square Tip Screwdriver? 14 Items: A Square Tip Screwdriver (SCREWDRIVER,SQUARE TIP) is a manual screwdriver having a single nonremoveable blade with a tip for driving and removing screws with a square recessed head.
What is a Six Point Tip Screwdriver? 165 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 109 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 295 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 27 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 69 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 69 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 161 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 85 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Bearing And Bushing Inserter And Remover Set? 63 Items: A Bearing And Bushing Inserter And Remover Set (INSERTER AND REMOVER SET,BEARING AND BUSHING) is a group of two or more INSERTER AND REMOVER, BEARING AND BUSHING having different characteristics.
What is a Piston Inserter? 59 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 59 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 77 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 32 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 25 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Stud Remover Set? 11 Items: A Stud Remover Set (REMOVER SET,STUD) is a group of various sized items designed to remove or extract studs. It may include guides, collets, collet housings, holders, and the like. It is without facilities to drive or set studs. See also INSERTER AND REMOVER, STUD AND INSERTER, STUD.
What is a Gear Inserter? 44 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 748 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 56 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Leveling-Support Jack Set? 10 Items: A Leveling-Support Jack Set (JACK SET,LEVELING-SUPPORT) is consists of two or more JACK, LEVELING-SUPPORT.
What is a Hand Optical Fiber Burnisher? 14 Items: A Hand Optical Fiber Burnisher (BURNISHER,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to polish the ends of FIBER, OPTIC to a smooth surface.
What is a Float? 29 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 45 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 35 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 14 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Cable Tie Installation Tool? 50 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Nonsurgical Forceps? 21 Items: A Nonsurgical Forceps (FORCEPS,NONSURGICAL) is a device designed to hold another item by grasping it in its jaws and retaining the grasp with a snap-lock type catch on its handles. It will have straight or curved, needle nose type jaws and handles with thumb and finger holes. For items designed for surgical use see FORCEPS (as modified). For items without a catch type device on the handles see PLIERS and PLIERS (as modified). See also HEAT SINK, SOLDERING AID.
What is a Bearing Staking Installation Tool? 146 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 62 Items
What is a Sealant Dispenser? 75 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 60 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Six Point Tip Screwdriver Set? 26 Items: A Six Point Tip Screwdriver Set (SCREWDRIVER SET,SIX POINT TIP) is a group of SCREWDRIVER, SIX POINT TIP having different characteristics.
What is a Ring Retaining Pliers Tip Set? 11 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 31 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Bearing Installation Tool Base? 49 Items: A Bearing Installation Tool Base (TOOL BASE,BEARING INSTALLATION) is the base of a hand tool used for seating bearings. It may be attached to a DRILLING MACHINE (as modified) to secure bearings wherever necessary to contain the bearing within its assembly.
What is a Torque Wrench Adapter Set? 40 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 37 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is a Torque Handle? 24 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Hand Vise Jaw? 15 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 69 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Fin Straightener? 12 Items: A Fin Straightener (STRAIGHTENER,FIN) is an item designed to straighten refrigerator evaporator fins, heat exchanger fins and the like.
What is a Wire Twister Pliers? 62 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 1496 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Socket Wrench Crowfoot Attachment Set? 55 Items: A Socket Wrench Crowfoot Attachment Set (CROWFOOT ATTACHMENT SET,SOCKET WRENCH) is a group of various sized CROWFOOT ATTACHMENT, SOCKET WRENCH. It may include a holder or the like. Excludes WRENCH SET, CROWFOOT, RATCHETING.
What is a Mechanical Puller Body? 13 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 116 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 89 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 66 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Blind Riveter Nosepiece? 23 Items: A Blind Riveter Nosepiece (NOSEPIECE,RIVETER,BLIND) is an item specifically designed for use with a RIVETER, BLIND (as modified).
What is a Torque Wrench Adapter? 1905 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 59 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 112 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 43 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 32 Items
What is a Splicing Sleeve Compressing Tool? 68 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 16 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Full Tracked Vehicle Track Connecting Fixture? 19 Items: A Full Tracked Vehicle Track Connecting Fixture (FIXTURE,TRACK CONNECTING,FULL TRACKED VEHICLE) is a fixture used to pull together two track ends, of a full tracked vehicle, for the purpose of connection. May also be used for holding the tension of a track while replacing a link.
Handle,Hydraulic Jack 32 Items
Handle,Mechanical Jack 35 Items
What is a Hand Hose Fitting Swaging Tool Kit? 24 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 19 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 24 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is an Electronics Pliers? 12 Items: An Electronics Pliers (PLIERS,ELECTRONICS) is a tool with clamping jaws for special works in the field of microelectronics and on circuit boards. See also PLIERS and PLIERS (as modified).
What is a Drift? 157 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Fish Tape? 26 Items: A Fish Tape (TAPE,FISH) is excludes FISHING TOOL, ELECTRICAL LEAD.
What is a Nutdriver? 634 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 37 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Nutdriver Set? 61 Items: A Nutdriver Set is an assortment of NUTDRIVER'S having various sizes, all of which have a screwdriver style handle, shaft and formed female hex or square socket at the driving end.
What is a Switch Adjusting Tool? 10 Items: A Switch Adjusting Tool (ADJUSTING TOOL,SWITCH) is an item used to adjust the quick acting mechanism of a SWITCH, SENSITIVE and other switches as modified.
What is a Ball Joint Installation Tool? 16 Items: A Ball Joint Installation Tool (INSTALLATION TOOL,BALL JOINT) is an item used to mount a BALL JOINT.
What is a Ball Joint Removal Tool? 13 Items: A Ball Joint Removal Tool (REMOVAL TOOL,BALL JOINT) is an item used to remove a BALL JOINT.
What is a Hydraulic Fitting Crimping Tool Head? 15 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Socket Wrench Extension Set? 34 Items: A Socket Wrench Extension Set (EXTENSION SET,SOCKET WRENCH) is a group of EXTENSION, SOCKET WRENCH having various characteristics.
What is a Torque Screwdriver? 216 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Starter Punch? 102 Items: A Starter Punch (PUNCH,STARTER) is a hand tool for installing and removing pins and keys and removing rivets. The point is tapered round with a blunt face. Excludes PUNCH, CENTER, SOLID.
What is a Special Purpose Combination Wrench? 46 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 71 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 49 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.
What is a Pole Extension? 31 Items: A Pole Extension (EXTENSION,POLE) is an item designed to be mounted on a telescopic or rigid pole that is used to increase its length.
What is a Pry Bar Set? 15 Items: A Pry Bar Set (BAR SET,PRY) is a group of PRY Bars having different characteristics.
What is a Hand Pick And Hook Set? 12 Items: A Hand Pick And Hook Set (PICK AND HOOK SET,HAND) is a group of two or more hooks having different sizes and characteristics for insertion and removal o-rings, gaskets and springs.
What is a Strap Wrench? 40 Items: A Strap Wrench (WRENCH,STRAP) is wrench which primarily consists of a handle provided with a strap or girth. It is designed to impart a rotary movement of force to a cylindrical part or without footprint for tool receiving. For items specially designed for oil filters or tubes see CLE,OIL FILTER (53484) or CLE TUBE CLAMP (03492).
What is a Cotter Key Puller? 11 Items: A Cotter Key Puller (PULLER,COTTER KEY) is a hand tool with a curved tip for prying loose cotter keys (pins).
What is a Mechanical Puller Section? 16 Items: A Mechanical Puller Section (PULLER SECTION,MECHANICAL) is an item which constitutes a part of a PULLER,MECHANICAL (18913). Do not use if a more specific designation is appropriate. Excludes: BODY,PULLER,MECHANICAL (53210);STEP PLATE, MECHANICAL PULLER (20185).

Stock Items From Supply Class 5120 Page 43 of 346

5120-01-386-6534
Hose Fitting Assembly Tool

013866534
1561-20S: RNCC: 3 | RNVC: 2
1561-20: RNCC: 5 | RNVC: 9

10 Feb 1994

5120-01-386-6384
Spanner Wrench

013866384
90250: RNCC: 3 | RNVC: 2
T12618361: RNCC: 5 | RNVC: 2

10 Feb 1994

5120-01-386-6396
Socket Head Screw Key

013866396
90270: RNCC: 3 | RNVC: 2
T12618363: RNCC: 5 | RNVC: 2

10 Feb 1994

5120-01-386-5992
Torque Wrench Adapter

013865992
3398212: RNCC: 3 | RNVC: 2
3823878: RNCC: 5 | RNVC: 9

9 Feb 1994

5120-01-386-6112
Electrical Straightner

013866112
5021-7445: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-01-386-5978
Bearing And Bushing Inserter And Remover

013865978
DAA7257D247-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-01-386-5972
Bearing And Bushing Inserter And Remover

013865972
DAA7257D250-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-01-386-5961
Bearing And Bushing Inserter And Remover

013865961
DAA7257D258-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-01-386-5955
Socket Wrench

013865955
73448: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-01-386-5950
Bearing And Bushing Inserter And Remover

013865950
DAA7257D257-001: RNCC: 3 | RNVC: 2

9 Feb 1994

5120-01-386-4469
Wire Splicing Rig Vise

013864469
4045: RNCC: 3 | RNVC: 2
78-8006-2472-4: RNCC: 3 | RNVC: 2

4 Feb 1994

5120-01-386-3703
Screwdriver Bit

3 Feb 1994

5120-01-386-3679
Screwdriver Bit

3 Feb 1994

5120-01-386-3694
Screwdriver Bit

013863694
170-8-ACR: RNCC: 3 | RNVC: 1

3 Feb 1994

5120-01-386-3684
Screwdriver Bit

3 Feb 1994

5120-01-386-3663
Screwdriver Bit

3 Feb 1994

5120-01-386-2969
Field Tie Tool

013862969
120405-1: RNCC: 3 | RNVC: 2

2 Feb 1994

5120-01-386-2825
Screwdriver Bit

013862825
212-8-ACR: RNCC: 3 | RNVC: 2
35404: RNCC: 3 | RNVC: 2

2 Feb 1994

5120-01-386-2791
Torque Screwdriver

013862791
6700459: RNCC: 3 | RNVC: 2
1001SPO/50 IN.-OZ: RNCC: 5 | RNVC: 2

2 Feb 1994

5120-01-386-2780
Hand Fiber Optic Contact Crimping Tool

013862780
SP884: RNCC: 3 | RNVC: 2
A3102702: RNCC: 7 | RNVC: 1

2 Feb 1994

5120-01-386-2501

1 Feb 1994

5120-01-386-2367
Rule Bender Die Set

013862367
11: RNCC: 3 | RNVC: 2

31 Jan 1994

5120-01-386-2074
Combination Box And Open End Wrench

31 Jan 1994

5120-01-386-1726
Torque Wrench

28 Jan 1994

5120-01-386-1765
Connector Puller

013861765
5002-0685: RNCC: 3 | RNVC: 2

28 Jan 1994

5120-01-386-1115
Electrical Contact Inserter And Remover

013861115
M81969/14-06: RNCC: 2 | RNVC: 2
MIL-I-81969/14: RNCC: 4 | RNVC: 1

27 Jan 1994

5120-01-386-0779
Mechanical Puller

013860779
3033-9910-000: RNCC: 3 | RNVC: 2
3033-9910-000: RNCC: 5 | RNVC: 2
3033-9910-000: RNCC: 5 | RNVC: 9

27 Jan 1994

5120-01-386-0769
Socket Wrench

013860769
060260: RNCC: 3 | RNVC: 2
8710-1728: RNCC: 5 | RNVC: 2

27 Jan 1994

5120-01-386-0697
Ratchet Wrench

26 Jan 1994

5120-01-385-9514
Adjustable Wrench

013859514
26110: RNCC: 3 | RNVC: 2
26110: RNCC: 3 | RNVC: 9

25 Jan 1994

5120-01-385-9520
Adjustable Wrench

013859520
26108: RNCC: 3 | RNVC: 2
26108: RNCC: 3 | RNVC: 9

25 Jan 1994

5120-01-385-9517
Adjustable Wrench

013859517
24015: RNCC: 3 | RNVC: 2
24015: RNCC: 3 | RNVC: 9
24015: RNCC: 5 | RNVC: 9

25 Jan 1994

5120-01-385-9519
Adjustable Wrench

013859519
26118: RNCC: 3 | RNVC: 2

25 Jan 1994

5120-01-385-9516
Adjustable Wrench

013859516
26124: RNCC: 3 | RNVC: 2

25 Jan 1994

5120-01-385-9513
Adjustable Wrench

013859513
26104: RNCC: 3 | RNVC: 2
26104: RNCC: 3 | RNVC: 9

25 Jan 1994

NSN 5120-01-385-8395 013858395 SCREWDRIVER,FLAT TIP

5120-01-385-8395
Flat Tip Screwdriver

20 Jan 1994

5120-01-385-7615
Drill Guide

013857615
UDB-753224-SPC-.1935X.32: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7597
Drill Guide

013857597
UDB-752420-SPC-.1285X.2625: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7592
Drill Guide

013857592
UDB-752416-SPC-.098X.2025: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7595
Drill Guide

013857595
UDB-753228-SPC-.1935X.4355: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7561
Special Item

013857561
GG13448: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7512
Special Item

013857512
GG13447: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7494
Special Item

013857494
GG13446: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7495
Special Item

013857495
GG13454: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7451
Special Item

013857451
GG13445: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7397
Band Saw Cleaner

013857397
131: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7406
Special Item

013857406
GG13452: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7349
Special Item

013857349
GG13450: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7253
Special Item

013857253
GG13453: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7281
Slate Bar

013857281
1174300: RNCC: 3 | RNVC: 2
40244: RNCC: 5 | RNVC: 9

18 Jan 1994

5120-01-385-7243
Main Bearing Tool

013857243
E53914: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7230
Special Item

013857230
GG13451: RNCC: 3 | RNVC: 2

18 Jan 1994

5120-01-385-7142
Open End Wrench

013857142
5488A34: RNCC: 3 | RNVC: 2

16 Jan 1994

5120-01-385-7121
Open End Wrench

013857121
5488A36: RNCC: 3 | RNVC: 2

16 Jan 1994

5120-01-385-7131
Open End Wrench

013857131
5488A32: RNCC: 3 | RNVC: 2

16 Jan 1994

5120-01-385-7126
Open End Wrench

013857126
5488A35: RNCC: 3 | RNVC: 2

16 Jan 1994

5120-01-385-6773
Hand Powered Poppet Valve Lapper

013856773
803-5959305-TAXXX-153: RNCC: 3 | RNVC: 2

16 Jan 1994

5120-01-385-6217
C Clamp

013856217
5046A24: RNCC: 3 | RNVC: 2

14 Jan 1994

5120-01-385-2794
Valve Seat Ring Wrench

013852794
803-4384536-5XXX-57: RNCC: 3 | RNVC: 2

7 Jan 1994

5120-01-385-2780
Ratchet Assembly

013852780
5301-0115: RNCC: 3 | RNVC: 2

7 Jan 1994

5120-01-385-2541
Drill Guide

013852541
DS-32-8: RNCC: 3 | RNVC: 2

7 Jan 1994

5120-01-385-2534
Drill Guide

013852534
DS-64-8: RNCC: 3 | RNVC: 2

7 Jan 1994

NSN 5120-01-385-2464 013852464 KEY SET,SOCKET HEAD SCREW

5120-01-385-2464
Socket Head Screw Key Set

6 Jan 1994

5120-01-385-1961
Wrench Handle

013851961
22129664: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-01-385-1811
Bearing And Bushing Inserter And Remover

013851811
GPA123: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-01-385-1754
Bearing And Bushing Inserter And Remover

013851754
GPA127: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-01-385-0731
Drill Guide

013850731
DS-48-8: RNCC: 3 | RNVC: 2

3 Jan 1994

5120-01-385-0088
Hand Powered Poppet Valve Lapper

30 Dec 1993

5120-01-385-0127
Drill Guide

013850127
UDB-752412-.0980: RNCC: 3 | RNVC: 2

30 Dec 1993

5120-01-385-0130
Drill Guide

013850130
UDB-753224-.2500: RNCC: 3 | RNVC: 2

30 Dec 1993

5120-01-385-0135
Drill Guide

013850135
UDB-752412-.098X.189: RNCC: 3 | RNVC: 2
UDB-752412-5TC-.098X.189: RNCC: 5 | RNVC: 2

30 Dec 1993

5120-01-385-0134
Drill Guide

013850134
UDB-753224-.1935: RNCC: 3 | RNVC: 2

30 Dec 1993

5120-01-385-0133
Drill Guide

013850133
UDB-752416-.1285: RNCC: 3 | RNVC: 2

30 Dec 1993

5120-01-385-0121
Drill Guide

013850121
UDB-752420-.1935: RNCC: 3 | RNVC: 2

30 Dec 1993

5120-01-385-0078
Hand Powered Poppet Valve Lapper

013850078
803-5959306-2XX-078: RNCC: 3 | RNVC: 2

30 Dec 1993

5120-01-384-8169
Extractor Tool

013848169
39138043: RNCC: 3 | RNVC: 2

23 Dec 1993

5120-01-384-7121
Bearing And Bushing Inserter And Remover

013847121
SW33147: RNCC: 3 | RNVC: 2

22 Dec 1993

5120-01-384-6761
Socket Head Screw Key Blade

013846761
12966B18: RNCC: 3 | RNVC: 9
12966B18: RNCC: C | RNVC: 1

21 Dec 1993

5120-01-384-6935
Mechanical Puller

013846935
T-239828: RNCC: 3 | RNVC: 2

21 Dec 1993

5120-01-384-5030
Socket Wrench

013845030
T-217664: RNCC: 3 | RNVC: 2

16 Dec 1993

5120-01-384-4527
Mechanical Puller

013844527
2551767: RNCC: 3 | RNVC: 2

15 Dec 1993

5120-01-384-4147
Seal Inserter And Remover

013844147
JT30040B: RNCC: 3 | RNVC: 2
JT30040: RNCC: 5 | RNVC: 9

15 Dec 1993

5120-01-384-3558
Installation Tool

013843558
6537400: RNCC: 3 | RNVC: 2

14 Dec 1993

5120-01-384-3555
Seat Ring Extractor

013843555
810-4384536-32-54: RNCC: 3 | RNVC: 2
803-4384536-32-54: RNCC: 5 | RNVC: 9

14 Dec 1993

5120-01-384-3345
Combination Open End And Spanner Wrench

13 Dec 1993

5120-01-384-3031
Mechanical Puller Set

013843031
23052405: RNCC: 3 | RNVC: 2

13 Dec 1993

5120-01-384-2778
Screwdriver Bit

11 Dec 1993

5120-01-384-2242
Face Spanner Wrench Socket

013842242
GS13148-1: RNCC: 3 | RNVC: 2

10 Dec 1993

5120-01-384-1589
Ctfg Template

9 Dec 1993

5120-01-384-1482
Diffusor Lifting Bar

013841482
12497C18: RNCC: 3 | RNVC: 2
12497C18: RNCC: 3 | RNVC: 9
12132F18-443: RNCC: 5 | RNVC: 2
12132F18-443: RNCC: 5 | RNVC: 9

9 Dec 1993

5120-01-384-0267
Tin Mallet

8 Dec 1993

5120-01-383-9693
Socket Head Screw Key

013839693
0203-2061-300: RNCC: 3 | RNVC: 9

7 Dec 1993

5120-01-383-9779
San Angelo Bar

013839779
1175200: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9741
Special Item

013839741
GG02333: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9629

1 Jan 1900

5120-01-383-9513
Special Item

013839513
GG02330: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9454
Special Item

013839454
GG02334: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9412

1 Jan 1900

5120-01-383-9421
Hand Blind Riveter

7 Dec 1993

5120-01-383-9426

1 Jan 1900

5120-01-383-9353
Tire Installation-Removal Bar

013839353
TSB-200: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9335
Special Item

013839335
GG02335: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9333
Special Item

013839333
GG02328: RNCC: 3 | RNVC: 2

7 Dec 1993

5120-01-383-9249

7 Dec 1993

5120-01-383-9013
Socket Wrench

013839013
51921980: RNCC: 3 | RNVC: 2

6 Dec 1993

5120-01-383-7997
Fastener Installation Tool Torque Limiter

013837997
ET20L18: RNCC: 3 | RNVC: 2

3 Dec 1993

5120-01-383-7993
Fastener Removal Tool

013837993
IT27T4: RNCC: 3 | RNVC: 2

3 Dec 1993

5120-01-383-7878
Retaining Ring Installation Tool

013837878
6227TRS: RNCC: 3 | RNVC: 2
6227TRS: RNCC: 3 | RNVC: 9
TRS6227: RNCC: 5 | RNVC: 9

3 Dec 1993

5120-01-383-7875
Bearing And Bushing Inserter And Remover

013837875
6537900: RNCC: 3 | RNVC: 2
65379: RNCC: 5 | RNVC: 9

3 Dec 1993

5120-01-383-7770
Lock Clip Tool

013837770
13010B18: RNCC: 3 | RNVC: 1
13010B18B: RNCC: 3 | RNVC: 2
PL14006N18ITEM781: RNCC: 5 | RNVC: 2
PL14006N18ITEM781: RNCC: 5 | RNVC: 9

2 Dec 1993

5120-01-383-7747

1 Jan 1900

5120-01-383-7748
Fixture

013837748
12282D18: RNCC: 3 | RNVC: 2
12282D18: RNCC: 3 | RNVC: 9
1228D18-496: RNCC: 5 | RNVC: 2
1228D18-496: RNCC: 5 | RNVC: 9

2 Dec 1993

5120-01-383-7728
Regenerator Cleaning Tool

013837728
1552AS107-16: RNCC: 3 | RNVC: 2
4022 340 18230: RNCC: 5 | RNVC: 2

2 Dec 1993

5120-01-383-7705
Rule Bender Die Set

013837705
9: RNCC: 3 | RNVC: 2

2 Dec 1993

5120-01-383-7281
Open End Wrench

013837281
0203-2131-300: RNCC: 3 | RNVC: 9

1 Dec 1993

5120-01-383-7295
Open End Wrench

013837295
0203-2119-300: RNCC: 3 | RNVC: 9

1 Dec 1993

5120-01-383-6283
Cap Wrench

013836283
753060: RNCC: 3 | RNVC: 2

26 Nov 1993

5120-01-383-6182
Lifting Tool

013836182
52430181: RNCC: 3 | RNVC: 2

26 Nov 1993

5120-01-383-6206
Lifting Tool

013836206
6899600: RNCC: 3 | RNVC: 2

26 Nov 1993

5120-01-383-4679
Socket Wrench Set

24 Nov 1993

5120-01-383-4606
Socket Wrench Set

24 Nov 1993

5120-01-383-4376
Bowl Wrench

013834376
0003-0354-000: RNCC: 3 | RNVC: 2
0003-0354-000: RNCC: 5 | RNVC: 2
0003-0354-000: RNCC: 5 | RNVC: 9

24 Nov 1993

5120-01-383-4374
Ring Puller

013834374
12924C18: RNCC: 3 | RNVC: 2
PL-12731F18ITEM32A: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-01-383-4373
Valve Seat Wrench

013834373
B14594.001.000: RNCC: 3 | RNVC: 2
SW124 FIND 30: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-01-383-4215
Spanner Wrench

013834215
51677480: RNCC: 3 | RNVC: 2

24 Nov 1993

5120-01-383-4236
Mechanical Puller

013834236
54413581: RNCC: 3 | RNVC: 2

24 Nov 1993

5120-01-383-4180
Spanner Wrench

013834180
7188900: RNCC: 3 | RNVC: 2

24 Nov 1993

5120-01-383-4043
Spanner Wrench

013834043
51922680: RNCC: 3 | RNVC: 2

24 Nov 1993

5120-01-383-3936
Pipe Wrench

013833936
9-07-02-001-00-1: RNCC: 3 | RNVC: 2
S14-101: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-01-383-3652
Mechanical Puller

013833652
808763: RNCC: 3 | RNVC: 2

23 Nov 1993

5120-01-383-3648
Spanner Wrench

23 Nov 1993

NSN 5120-01-383-1712 013831712 KEY SET,SOCKET HEAD SCREW

5120-01-383-1712
Socket Head Screw Key Set

19 Nov 1993

5120-01-383-1378
Box Wrench

013831378
UIW-26A1: RNCC: 3 | RNVC: 2
UIW-26A1: RNCC: 5 | RNVC: 9

19 Nov 1993

5120-01-383-1071
Slip Joint Pliers

013831071
GPA-083: RNCC: 3 | RNVC: 2

19 Nov 1993

5120-01-383-0907
Mechanical Puller

1 Jan 1900

5120-01-383-0708
Mechanical Spreader

013830708
3W19049-MEU-101: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-01-382-9708
Spanner Wrench

013829708
6209404: RNCC: 3 | RNVC: 2

13 Nov 1993

5120-01-382-8875
Valve Seat Lapping Tool

013828875
1000601-X-ST-18-LS: RNCC: 3 | RNVC: 2
1000601-X-ST-18-LS: RNCC: 5 | RNVC: 9

11 Nov 1993

5120-01-382-7957
Terminal Cri Contact Positioner

1 Jan 1900

5120-01-382-7364
Socket Wrench Spanner Attachment

013827364
DAA7257A107-001: RNCC: 3 | RNVC: 2

9 Nov 1993

5120-01-382-5160
Vise

4 Nov 1993

5120-01-382-5183
Shaft Sleeve Tool

013825183
Y237S8BBX1: RNCC: 3 | RNVC: 2
Y237S8BBX1: RNCC: 3 | RNVC: 9

4 Nov 1993

5120-01-382-4706
Electrical Contact Inserter

1 Jan 1900

5120-01-382-4314
Gasifier Turbine Holding Tool

013824314
GPA-126: RNCC: 3 | RNVC: 2

2 Nov 1993

5120-01-382-4284
Socket Wrench Adapter

013824284
5853: RNCC: 3 | RNVC: 2

2 Nov 1993

5120-01-382-4229

1 Jan 1900

5120-01-382-3930
Open End Wrench

013823930
GPA-076: RNCC: 3 | RNVC: 2

1 Nov 1993

5120-01-382-3489
Clip Bender

1 Nov 1993

5120-01-382-3077
Socket Wrench Socket

013823077
5545A74: RNCC: 3 | RNVC: 2

29 Oct 1993

5120-01-382-3083
Socket Wrench Socket

013823083
5545A33: RNCC: 3 | RNVC: 2

29 Oct 1993

5120-01-382-2807
Rotating Members Aligning Tool

013822807
GPA-108: RNCC: 3 | RNVC: 9

29 Oct 1993

5120-01-382-2799
Gear Inserter

29 Oct 1993

5120-01-382-2733
Socket Wrench Socket

013822733
5545A76: RNCC: 3 | RNVC: 2

29 Oct 1993

5120-01-382-2725
Socket Wrench Socket

013822725
5541A13: RNCC: 3 | RNVC: 2

29 Oct 1993

5120-01-382-1710
Socket Wrench Socket

013821710
5545A92: RNCC: 3 | RNVC: 2

29 Oct 1993

5120-01-382-1517
Pin Inserter

013821517
PGA-062: RNCC: 3 | RNVC: 2

29 Oct 1993

5120-01-382-1387
Seal Inserter

013821387
GPA-111: RNCC: 3 | RNVC: 2

28 Oct 1993

5120-01-382-1374
Socket Head Screw Key

013821374
PGA-077: RNCC: 3 | RNVC: 2

28 Oct 1993

5120-01-382-1085
Socket Wrench Adapter

28 Oct 1993

5120-01-382-0692
Seal Inserter

013820692
GPA-146: RNCC: 3 | RNVC: 2

28 Oct 1993

5120-01-382-0708

28 Oct 1993

5120-01-382-0658
Seal Inserter

013820658
GPA-049: RNCC: 3 | RNVC: 2

28 Oct 1993

5120-01-382-0649
Seal Inserter

013820649
GPA-131: RNCC: 3 | RNVC: 2

28 Oct 1993

5120-01-382-0220
Screwdriver Bit

013820220
HW-17: RNCC: 3 | RNVC: 2
HW-17: RNCC: 5 | RNVC: 9

28 Oct 1993

5120-01-381-7309
Connector Fiber Optic Contact Installation Tool

013817309
A3102682: RNCC: 3 | RNVC: 2

22 Oct 1993

5120-01-381-6364
Mattock-Pick Handle

013816364
53-061: RNCC: 3 | RNVC: 2
9055552: RNCC: 5 | RNVC: 9

21 Oct 1993

5120-01-381-6257
Socket Wrench Socket

1 Jan 1900

5120-01-381-6199
Torque Screwdriver

013816199
PM-5: RNCC: 3 | RNVC: 1
B4021198-4: RNCC: 5 | RNVC: 9
B4021198-4: RNCC: 5 | RNVC: 9
B4021198: RNCC: 5 | RNVC: 9

20 Oct 1993

5120-01-381-5990
Disk Inserter And Remover

013815990
219027: RNCC: 3 | RNVC: 2

20 Oct 1993

5120-01-381-5967
Alignment Tool

013815967
GS15493-1: RNCC: 3 | RNVC: 2

20 Oct 1993

5120-01-381-5292
Open End Wrench

013815292
LCC164PC14AND15: RNCC: 3 | RNVC: 9

18 Oct 1993

5120-01-381-3220
Torque Wrench

013813220
40-B4892-1: RNCC: 3 | RNVC: 2

14 Oct 1993

5120-01-381-3132
Jeweler's Staking Tool

013813132
DAA7257P104-103: RNCC: 3 | RNVC: 2

14 Oct 1993

5120-01-381-1802
Hand Hammer

013811802
9019522: RNCC: 3 | RNVC: 2

11 Oct 1993

5120-01-381-1688
Spanner Wrench

013811688
A07556.003.259: RNCC: 3 | RNVC: 2
SW131 FIND 21: RNCC: 5 | RNVC: 2

11 Oct 1993

5120-01-381-1619
Hand Hammer

013811619
9017520: RNCC: 3 | RNVC: 2

11 Oct 1993

5120-01-381-1341
Bearing And Bushing Remover

013811341
GPR-010: RNCC: 3 | RNVC: 2

11 Oct 1993

5120-01-381-1083
Jeweler's Staking Tool

013811083
DAA7257P106-101: RNCC: 3 | RNVC: 2

8 Oct 1993

5120-01-381-1073
Bearing And Bushing Inserter And Remover

013811073
DAA7257D246-001: RNCC: 3 | RNVC: 2

8 Oct 1993

5120-01-381-1081
Jeweler's Staking Tool

013811081
DD7257P104-101: RNCC: 3 | RNVC: 2

8 Oct 1993

5120-01-381-0655
Alignment Tool

013810655
Y3HB32AX1: RNCC: 3 | RNVC: 2
Y3HB32AX1: RNCC: 3 | RNVC: 9
248884A: RNCC: 5 | RNVC: 2
248884A: RNCC: 5 | RNVC: 9

6 Oct 1993

5120-01-381-0898
Spanner Wrench

013810898
GPS-076: RNCC: 3 | RNVC: 2

7 Oct 1993

5120-01-381-0803
Hand Shovel

013810803
9072061: RNCC: 3 | RNVC: 2

7 Oct 1993

5120-01-381-0804
Hand Hammer

013810804
9027708: RNCC: 3 | RNVC: 2

7 Oct 1993

5120-01-381-0780
Mattock

013810780
9024560: RNCC: 3 | RNVC: 2
PM5 H-ECS: RNCC: 5 | RNVC: 2

7 Oct 1993

5120-01-381-0777
Quick Adjusting Screw Clamp

013810777
X248897: RNCC: 3 | RNVC: 2
X248897: RNCC: 3 | RNVC: 9
249038A: RNCC: 5 | RNVC: 2
249038A: RNCC: 5 | RNVC: 9

7 Oct 1993

5120-01-381-0606

6 Oct 1993

5120-01-380-9535
Stud Installing Tool Puller Attachment

013809535
HP7523-10F: RNCC: 3 | RNVC: 1

1 Oct 1993

5120-01-380-8993
Screwdriver Bit

29 Sep 1993

5120-01-380-9006
Open End Wrench

29 Sep 1993

5120-01-380-8983
Inspection Mirror

013808983
GA51B: RNCC: 3 | RNVC: 2
GA51B: RNCC: 5 | RNVC: 2
GA51A: RNCC: 5 | RNVC: 9

29 Sep 1993

5120-01-380-8981
Screwdriver Bit Set And Handle

29 Sep 1993

5120-01-380-7743
Reverse Key Bearer

013807743
6225162 PC21: RNCC: 3 | RNVC: 2
1310-108 PC21: RNCC: 5 | RNVC: 2

27 Sep 1993

5120-01-380-7689
Open End Wrench

013807689
B107.100: RNCC: 3 | RNVC: 1
B107.100 OPEN END TY1CL1: RNCC: 5 | RNVC: 1
B107.9M: RNCC: 5 | RNVC: 9
B107.9M TY2: RNCC: 5 | RNVC: 9

27 Sep 1993

5120-01-380-7694
Open End Wrench

013807694
B107.100: RNCC: 3 | RNVC: 1
B107.100 OPEN END TY1CL1: RNCC: 5 | RNVC: 1
B107.9M: RNCC: 5 | RNVC: 9
B107.9M TY2: RNCC: 5 | RNVC: 9

27 Sep 1993

5120-01-380-6591
Pitch Rigging Tool

013806591
DAA7227053-001: RNCC: 3 | RNVC: 2

23 Sep 1993

5120-01-380-5914
Reverse Key

013805914
6225162 PC20: RNCC: 3 | RNVC: 2
1310-108 PC20: RNCC: 5 | RNVC: 2

22 Sep 1993

5120-01-380-5898
Reverse Key Bearer

013805898
6225162 PC24: RNCC: 3 | RNVC: 2
1310-108 PC24: RNCC: 5 | RNVC: 2

22 Sep 1993

5120-01-380-5379
Spanner Wrench

013805379
2620-123X1 PC1801: RNCC: 3 | RNVC: 2
2620-123X1 PC1801: RNCC: 5 | RNVC: 2
2620-123X1 PC1801: RNCC: 5 | RNVC: 9

21 Sep 1993

5120-01-380-5092
Hand Terminal Crimping Tool

013805092
69656-7: RNCC: 3 | RNVC: 2
69656-7MOD-E: RNCC: 5 | RNVC: 9

21 Sep 1993

5120-01-380-4662
Socket Head Screw Key

013804662
31912: RNCC: 3 | RNVC: 2
D-7045-0160-12C: RNCC: 5 | RNVC: 2

20 Sep 1993

NSN 5120-01-380-2724 013802724 WRENCH,OPEN END

5120-01-380-2724
Open End Wrench

17 Sep 1993

5120-01-380-2427
Anvil Sleeve

013802427
TD5016G-IE-42: RNCC: 3 | RNVC: 2

16 Sep 1993

5120-01-380-0601

1 Jan 1900

5120-01-379-8883
Bearing And Bushing Inserter

013798883
GPA-281: RNCC: 3 | RNVC: 2

10 Sep 1993

5120-01-379-8849
Bearing And Bushing Inserter

10 Sep 1993

5120-01-379-8825
Special Insertion Tool

013798825
820-6896275PCT1000-8: RNCC: 3 | RNVC: 1
820-529596017G: RNCC: 5 | RNVC: 1
820-5295960PC17GA: RNCC: 5 | RNVC: 1
820-56295154PCT117G: RNCC: 5 | RNVC: 1

9 Sep 1993

5120-01-379-8799
Gear Mesh Alignment Tool

9 Sep 1993

5120-01-379-8764

1 Jan 1900

5120-01-379-7745
Spanner Wrench

013797745
4159318: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-01-379-7583
Reverse Key Bearer

013797583
6225167 PC56: RNCC: 3 | RNVC: 2
1311-19 PC56: RNCC: 5 | RNVC: 2

8 Sep 1993

5120-01-379-5700

1 Mar 1994

5120-01-379-5703

1 Mar 1994

5120-01-379-5424
Socket Wrench Socket

013795424
TDH11A: RNCC: 3 | RNVC: 2

2 Sep 1993

5120-01-379-5339
Socket Head Screw Key

2 Sep 1993

5120-01-379-5016
Electronic Equipment Alignment Tool

013795016
465920-01: RNCC: 3 | RNVC: 2
401256-01: RNCC: 5 | RNVC: 9

31 Aug 1993

5120-01-379-4978
Rivet Bucking Bar

013794978
CA21038-4-T10: RNCC: 3 | RNVC: 2

31 Aug 1993

5120-01-379-4835
Inu Pedestal System

013794835
G802L: RNCC: 3 | RNVC: 9

31 Aug 1993

5120-01-379-3888
Terminal Crimping Tool Contact Positioner

013793888
K721: RNCC: 3 | RNVC: 2

30 Aug 1993

5120-01-379-3494
Spanner Wrench

1 Jan 1900

5120-01-379-2817
Torque Wrench

013792817
570-2151-01: RNCC: 3 | RNVC: 2

30 Aug 1993

5120-01-379-0184

1 Dec 1993

5120-01-379-0194
Electrical Connector Adapter Tool

013790194
CM389T-9B: RNCC: 3 | RNVC: 1

26 Aug 1993

5120-01-379-0200
Electrical Connector Adapter Tool

013790200
CM5015R-48: RNCC: 3 | RNVC: 2

26 Aug 1993

5120-01-379-0199

1 Dec 1993

5120-01-379-0159

1 Dec 1993

5120-01-379-0150

1 Dec 1993

5120-01-379-0154
Electrical Connector Adapter Tool

013790154
CM288R-15B: RNCC: 3 | RNVC: 2

26 Aug 1993

5120-01-379-0146
Electrical Connector Adapter Tool

013790146
CM389T-17A: RNCC: 3 | RNVC: 1

26 Aug 1993

5120-01-378-9981
Connector Fiber Optic Contact Removal Tool

013789981
AR100-8: RNCC: 3 | RNVC: 2

26 Aug 1993

5120-01-378-9979
Connector Fiber Optic Contact Removal Tool

013789979
AR100-6: RNCC: 3 | RNVC: 2

26 Aug 1993

5120-01-378-9601
Hand Terminal Crimping Tool

25 Aug 1993

5120-01-378-9591
Terminal Crimping Tool Contact Positioner

013789591
TP543: RNCC: 3 | RNVC: 2

25 Aug 1993

5120-01-378-8201
Pipe Wrench

21 Aug 1993

5120-01-378-7685
Pipe Wrench

21 Aug 1993

5120-01-378-7637
Pipe Wrench

21 Aug 1993

5120-01-378-6701
Socket Wrench Extension

013786701
AS4283: RNCC: 3 | RNVC: 1
AS4283 TY2CL2: RNCC: 5 | RNVC: 1
L42: RNCC: 5 | RNVC: 2

21 Aug 1993

5120-01-378-6477
Bearing Staking Installation Tool

013786477
DAA7257P102-103: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-6589
Socket Wrench Socket

21 Aug 1993

5120-01-378-6196
Box Wrench

21 Aug 1993

5120-01-378-6028
Box Wrench

013786028
AS954: RNCC: 3 | RNVC: 1
AS954 TY2CL1STB: RNCC: 5 | RNVC: 1
AS954 TY2CL1STB: RNCC: 5 | RNVC: 1
XDH1618A: RNCC: 5 | RNVC: 2
B107.9: RNCC: 5 | RNVC: 9
B107.100: RNCC: 5 | RNVC: 9
B107.100 BOX TY1CL1: RNCC: 5 | RNVC: 9
B107.9 TY1CL1: RNCC: 5 | RNVC: 9
XDH1618: RNCC: 5 | RNVC: 9

21 Aug 1993

5120-01-378-5945
Bearing Staking Installation Tool

013785945
DAA7257P102-101: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-5735

1 Feb 1994

5120-01-378-5671
Box Wrench

21 Aug 1993

5120-01-378-5617
Mechanical Puller

013785617
1106698-1: RNCC: 3 | RNVC: 2
1106698-1: RNCC: 5 | RNVC: 9

21 Aug 1993

5120-01-378-5519
Bearing Staking Installation Tool

013785519
DAA7257P105-103: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-5335
Seal Inserter And Remover

013785335
AKS-46305: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-5198
Ratchet Wrench

013785198
125-C: RNCC: 3 | RNVC: 9

21 Aug 1993

5120-01-378-5140
Combination Box And Open End Wrench

013785140
OXI9B: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-5151
Bearing Staking Installation Tool

013785151
DAA7257P105-101: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-5141
Socket Wrench Socket

013785141
TDH6A: RNCC: 3 | RNVC: 2

21 Aug 1993

5120-01-378-4962
Box Wrench

21 Aug 1993

5120-01-378-4449
Module Removal Tool

13 Aug 1993

5120-01-378-4191
Hand Terminal Crimping Tool

013784191
608230-1: RNCC: 3 | RNVC: 9

12 Aug 1993

5120-01-378-4083
Bearing And Bushing Remover

013784083
GPR-006: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-4089
Piston Ring Compressor

013784089
BM2918-12: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-2809
Socket Wrench Socket

013782809
TLH-16: RNCC: 3 | RNVC: 9

12 Aug 1993

5120-01-378-2725
Plier Clamp

013782725
T-109: RNCC: 3 | RNVC: 2
T-109: RNCC: 5 | RNVC: 9

12 Aug 1993

5120-01-378-2426
Spanner Wrench

013782426
GPA-221: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-2218
Bearing And Bushing Inserter And Remover

013782218
GPA-234: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-2190
Bearing And Bushing Remover

013782190
GPR-013: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-1972
Bearing And Bushing Remover

013781972
GPR-009: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-1683
Bearing And Bushing Remover

013781683
GPR-008: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-1622
Seal Inserter

013781622
GPA-212: RNCC: 3 | RNVC: 2

12 Aug 1993

5120-01-378-1324
Caster Jack Assembly

013781324
ABJ-6030-12: RNCC: 3 | RNVC: 9

12 Aug 1993

5120-01-378-0305
Anvil Sleeve

013780305
TD5016G-IE-41: RNCC: 3 | RNVC: 9

9 Aug 1993

5120-01-378-0146
Gear Inserter And Remover

013780146
GPA-185: RNCC: 3 | RNVC: 2

5 Aug 1993

5120-01-378-0148
Jet Extractor

013780148
2HL475: RNCC: 3 | RNVC: 2
2HL475: RNCC: 5 | RNVC: 9

5 Aug 1993

5120-01-377-9689
Mechanical Puller

013779689
GPA-242: RNCC: 3 | RNVC: 2

4 Aug 1993

5120-01-377-8727
Bearing And Bushing Inserter

013778727
GPA-174: RNCC: 3 | RNVC: 2

31 Jul 1993

5120-01-377-8725
Seal Inserter

013778725
GPA-238: RNCC: 3 | RNVC: 2

31 Jul 1993

5120-01-377-8715
Mechanical Puller

013778715
GPR-001: RNCC: 3 | RNVC: 2

31 Jul 1993

5120-01-377-8696
Bearing And Bushing Inserter And Remover

013778696
GPA-096: RNCC: 3 | RNVC: 2

31 Jul 1993

5120-01-377-8704
Bearing And Bushing Inserter And Remover

013778704
GPA-175: RNCC: 3 | RNVC: 2

31 Jul 1993

5120-01-377-8220
Socket Head Screw Key

31 Jul 1993

5120-01-377-7666
Mechanical Puller Adapter

013777666
GPA-254: RNCC: 3 | RNVC: 2

24 Jul 1993

5120-01-377-7052
Special Seat Lapping Tool

013777052
797D377GR3: RNCC: 3 | RNVC: 1

23 Jul 1993

5120-01-377-5101
Socket Wrench Spanner Attachment

013775101
DAA7257D194-001: RNCC: 3 | RNVC: 2

19 Jul 1993

5120-01-377-4825
Screwdriver Bit Set And Handle

013774825
RSD500B: RNCC: 3 | RNVC: 2

18 Jul 1993

5120-01-377-4597
Puller Rod

013774597
PWA55535-1: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4574
Electrical Connector Adapter Tool

013774574
CM5015-44: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4607
Puller Post

013774607
PWA55544-1: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4603
Electrical Connector Adapter Tool

013774603
CM288R-11A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4609
Electrical Connector Adapter Tool

013774609
CM288-23A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4578
Electrical Connector Adapter Tool

013774578
CM229L-44: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4586
Electrical Connector Adapter Tool

013774586
CM288-33B: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4569
Electrical Connector Adapter Tool

013774569
CM815S-10A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4571
Electrical Connector Adapter Tool

013774571
CM837RB-10: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4565
Electrical Connector Adapter Tool

013774565
CM288-19B: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4529
Electrical Connector Adapter Tool

013774529
CM229-20: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4545
Electrical Connector Adapter Tool

013774545
CM288R-13A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4548
Electrical Connector Adapter Tool

013774548
CM288-19A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4534
Electrical Connector Adapter Tool

013774534
CM288R-11B: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4525
Electrical Connector Adapter Tool

013774525
CM389T-25A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4524
Electrical Connector Adapter Tool

013774524
CM288-23B: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4523
Electrical Connector Adapter Tool

013774523
CM288R-33A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4519
Electrical Connector Adapter Tool

013774519
CM815S-10B: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4507
Electrical Connector Adapter Tool

013774507
CM229-40: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-4514
Electrical Connector Adapter Tool

013774514
CM288-29A: RNCC: 3 | RNVC: 2

16 Jul 1993

5120-01-377-3795
Electrical Contact Remover

15 Jul 1993

5120-01-377-3835
Spanner Wrench

013773835
17160: RNCC: 3 | RNVC: 9

15 Jul 1993

5120-01-377-3024
Hand Blind Riveter

12 Jul 1993

5120-01-377-2269
Electrical Contact Remover

1 Feb 1994

5120-01-377-2087
Anvil Sleeve

013772087
TD5016G-IE-52: RNCC: 3 | RNVC: 9

8 Jul 1993

5120-01-377-2084
Anvil Sleeve

013772084
TD5016G-IE-50: RNCC: 3 | RNVC: 9

8 Jul 1993

5120-01-377-2080
Anvil Sleeve

013772080
TD5016G-IE-31: RNCC: 3 | RNVC: 9

8 Jul 1993

5120-01-377-2083
Anvil Sleeve

013772083
TD5016G-IE-40: RNCC: 3 | RNVC: 9

8 Jul 1993

5120-01-377-2086
Anvil Sleeve

013772086
TD5016G-IE-51: RNCC: 3 | RNVC: 9

8 Jul 1993

5120-01-377-2081
Anvil Sleeve

013772081
TD5016G-IE-32: RNCC: 3 | RNVC: 9

8 Jul 1993

5120-01-377-1937
Inspection Mirror

013771937
69-022: RNCC: 3 | RNVC: 2
E2TM: RNCC: 3 | RNVC: 2
69B022: RNCC: 5 | RNVC: 9

7 Jul 1993

1 Dec 1993

1 Dec 1993

1 Dec 1993

1 Dec 1993

1 Dec 1993

1 Jan 1994

1 Jan 1994

1 Jan 1994

5120-01-377-1360
Electrical Connector Adapter Tool

3 Jul 1993

1 Dec 1993

1 Jan 1994

1 Jan 1994

1 Jan 1994

1 Jan 1994

1 Jan 1994

1 Jan 1994

1 Jan 1994

1 Jan 1994

1 Dec 1993

1 Dec 1993

1 Jan 1994

1 Dec 1993

1 Jan 1994

1 Dec 1993

1 Dec 1993

5120-01-377-1331
Electrical Connector Adapter Tool

013771331
CM815S-8: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1329
Electrical Connector Adapter Tool

013771329
CM389LR-21: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1339

1 Dec 1993

5120-01-377-1327
Electrical Connector Adapter Tool

013771327
CM288R-13B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1332
Electrical Connector Adapter Tool

013771332
CM288-17A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1338

1 Dec 1993

5120-01-377-1337

1 Dec 1993

5120-01-377-1330
Electrical Connector Adapter Tool

013771330
CM837-8C: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1326
Electrical Connector Adapter Tool

013771326
CM288-25A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1324
Electrical Connector Adapter Tool

013771324
CM229-22: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1322
Puller Pull Rod

013771322
PWA55535-2: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1300
Electrical Connector Adapter Tool

013771300
CM389BR-17: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1314
Electrical Connector Adapter Tool

013771314
CM288R-19B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1321
Electrical Connector Adapter Tool

013771321
CM288R-17B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1319
Electrical Connector Adapter Tool

013771319
CM229L-28: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1317
Electrical Connector Adapter Tool

013771317
CM288-29B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1316
Electrical Connector Adapter Tool

013771316
CM5015R-40: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1310
Electrical Connector Adapter Tool

013771310
CM815S-18A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1318
Electrical Connector Adapter Tool

013771318
CM288R-33B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1301
Electrical Connector Adapter Tool

013771301
CM288R-19A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1306
Electrical Connector Adapter Tool

013771306
CM5015-48: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1308
Electrical Connector Adapter Tool

013771308
CM815S-16A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1284
Electrical Connector Adapter Tool

013771284
CM229-16: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1295
Electrical Connector Adapter Tool

013771295
CM389LR-9: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1287
Electrical Connector Adapter Tool

013771287
CM229L-48: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1272
Electrical Connector Adapter Tool

013771272
CM229-36: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1303
Anvil Sleeve

013771303
TD5016G-IE-30: RNCC: 3 | RNVC: 9

3 Jul 1993

5120-01-377-1294
Electrical Connector Adapter Tool

013771294
CM288R-25A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1267
Electrical Connector Adapter Tool

013771267
CM389LR-19: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1257
Electrical Connector Adapter Tool

013771257
CM229-24: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1271
Electrical Connector Adapter Tool

013771271
CM288-11A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1278
Electrical Connector Adapter Tool

013771278
CM288-25B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1258
Electrical Connector Adapter Tool

013771258
CM288-15B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1269
Electrical Connector Adapter Tool

013771269
CM288R-15A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1260
Electrical Connector Adapter Tool

013771260
CM837-18B: RNCC: 3 | RNVC: 2
BT837-18B: RNCC: 5 | RNVC: 2
CM837-18B: RNCC: 5 | RNVC: 2
BT837-18B: RNCC: 5 | RNVC: 9

3 Jul 1993

5120-01-377-1251
Electrical Connector Adapter Tool

013771251
CM288R-23B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1244
Electrical Connector Adapter Tool

013771244
CM389BR-15: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1249
Electrical Connector Adapter Tool

013771249
CM389BR-25: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1247
Puller Handle Rod

013771247
PWA55535-5: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1250
Electrical Connector Adapter Tool

013771250
CM229-14: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1235
Electrical Connector Adapter Tool

013771235
CM288-15A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1240
Electrical Connector Adapter Tool

013771240
CM288R-29B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1238
Electrical Connector Adapter Tool

013771238
CM5015R-8: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1243
Electrical Connector Adapter Tool

013771243
CM288-33A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1229
Puller Handle

013771229
PWA55535-4: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1220
Wrench Cap

013771220
PWA55920-2: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1223
Electrical Connector Adapter Tool

013771223
CM229L-32: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1227
Electrical Connector Adapter Tool

013771227
CM288R-23A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1231
Electrical Connector Adapter Tool

013771231
CM837-16B: RNCC: 3 | RNVC: 2
CM837-16B: RNCC: 5 | RNVC: 2
BT837-16B: RNCC: 5 | RNVC: 2
BT837-16B: RNCC: 5 | RNVC: 9

3 Jul 1993

5120-01-377-1214
Electrical Connector Adapter Tool

013771214
CM389BR-21: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1210
Electrical Connector Adapter Tool

013771210
CM389BR-13: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1202
Electrical Connector Adapter Tool

013771202
CM5015R-44: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1204
Electrical Connector Adapter Tool

013771204
CM288-13B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1211
Electrical Connector Adapter Tool

013771211
CM815S-18B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1190
Electrical Connector Adapter Tool

013771190
CM389BR-23: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1197
Electrical Connector Adapter Tool

013771197
CM288R-29A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1198
Electrical Connector Adapter Tool

013771198
CM229-12: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1187
Electrical Connector Adapter Tool

013771187
CM229L-52: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1176
Impeller Locking Tool

013771176
2650-3794: RNCC: 3 | RNVC: 2
265379401: RNCC: 5 | RNVC: 2

3 Jul 1993

5120-01-377-1181
Electrical Connector Adapter Tool

013771181
CM389BR-19: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1179
Electrical Connector Adapter Tool

013771179
CM288-13A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1177
Electrical Connector Adapter Tool

013771177
CM288-17B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1185
Electrical Connector Adapter Tool

013771185
CM-837RB-8: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1182
Electrical Connector Adapter Tool

013771182
CM288R-17A: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1186
Electrical Connector Adapter Tool

013771186
CM389BR-11: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1171
Electrical Connector Adapter Tool

013771171
CM288R-25B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1157
Electrical Connector Adapter Tool

013771157
CM229-18: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-1150
Electrical Connector Adapter Tool

013771150
CM288-11B: RNCC: 3 | RNVC: 2

3 Jul 1993

5120-01-377-0264
Crimping Tool Die

013770264
Y726: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0265
Crimping Tool Die

013770265
Y739: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0262
Crimping Tool Die

013770262
Y745: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0261
Electrical Contact Remover

013770261
DRK171: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0257
Electrical Contact Remover

013770257
DRK504B: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0253
Crimping Tool Die

013770253
Y589: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0258

1 Dec 1993

5120-01-377-0255
Electrical Contact Inserter And Remover

013770255
DHK373: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0251
Electrical Contact Remover

013770251
DRK524B: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0234
Crimping Tool Die

013770234
Y732: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0230
Electrical Contact Remover

013770230
CET20-14: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0240
Terminal Crimping Tool Contact Positioner

013770240
K261: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0223
Crimping Tool Die

013770223
Y749: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0219
Crimping Tool Die

013770219
Y744: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0226
Electrical Contact Remover

013770226
CET12-16: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0217
Crimping Tool Die

013770217
Y740: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0210
Crimping Tool Die

013770210
Y733: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0200
Crimping Tool Die

013770200
Y743: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0201
Crimping Tool Die

013770201
Y748: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0206
Injector Puller

2 Jul 1993

5120-01-377-0204
Electrical Contact Remover

013770204
DRK332: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0203
Electrical Contact Remover

013770203
DHK117: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0187
Crimping Tool Die

013770187
Y747: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0191
Cartridge Wrench

2 Jul 1993

5120-01-377-0196
Socket Wrench

013770196
17G140065-25: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0192
Electrical Contact Remover

013770192
DRK503B: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0178
Hand Blind Riveter

013770178
200-TSK: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0177
Electrical Contact Remover

013770177
CET20-1A: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0188
Electrical Contact Remover

013770188
DRK271: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0179
Crimping Tool Die

013770179
Y735: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-377-0181
Crimping Tool Die

013770181
Y742: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-376-9839
Torque Wrench

013769839
BT-AT-1500: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-01-376-9804
Electrical Contact Remover

013769804
DRK508B: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9810
Crimping Tool Die

013769810
Y188: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9808
Crimping Tool Die

013769808
Y737: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9809
Crimping Tool Die

013769809
Y738: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9805
Electrical Contact Remover

013769805
DRK523B: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9807
Crimping Tool Die

013769807
Y734: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9802
Electrical Contact Remover

013769802
DRK507B: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9792
Socket Wrench Extension

013769792
PWA55241-2: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9798
Electrical Contact Remover

013769798
DRK506B: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9797
Electrical Contact Remover

013769797
DRK505B: RNCC: 3 | RNVC: 2

1 Jul 1993

5120-01-376-9786
Hand Screw Jack

013769786
640-1554-001: RNCC: 3 | RNVC: 9

1 Jul 1993

5120-01-376-9402
Hand Optical Fiber Burnisher

013769402
A3102640: RNCC: 1 | RNVC: 2
104199435: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-01-376-9310
Hand Hammer

013769310
6061A2: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-01-376-9280
Cable Splicers Kit

013769280
H23B037: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-01-376-8408
Special Staking Tool

013768408
TL-1: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-01-376-8354
Woven Cable Grip

013768354
014-02-1216: RNCC: 3 | RNVC: 9

8 Jun 1993

5120-01-376-7992
Fuse Puller

013767992
FP-3: RNCC: 3 | RNVC: 2

8 Jun 1993

5120-01-376-7991
Fuse Puller

013767991
FP-4: RNCC: 3 | RNVC: 2

8 Jun 1993

5120-01-376-7752
Hand Screw Jack

013767752
DAA7229D249-001: RNCC: 3 | RNVC: 2

8 Jun 1993

5120-01-376-7768
Socket Head Screw Key

8 Jun 1993

5120-01-376-7400
Plug Wrench

013767400
WRH-2: RNCC: 3 | RNVC: 2

8 Jun 1993

5120-01-376-7321
Torque Wrench

7 Jun 1993

5120-01-376-7377
Locating Pin

013767377
TD371C1-18: RNCC: 3 | RNVC: 2
AK168731202-117: RNCC: 5 | RNVC: 2

8 Jun 1993

5120-01-376-7266
Woven Cable Grip

013767266
014-02-1188: RNCC: 3 | RNVC: 9

7 Jun 1993

5120-01-376-7016
Screwdriver Bit

7 Jun 1993

5120-01-376-7015
Screwdriver Bit

7 Jun 1993

5120-01-376-5148
Bearing And Bushing Inserter And Remover

013765148
T101750-103: RNCC: 3 | RNVC: 2

5 Jun 1993

5120-01-376-5145
Drive Pin Punch

5 Jun 1993

5120-01-376-5146
Brake Repair Pliers

5 Jun 1993

5120-01-376-5126
Torque Wrench Adapter

4 Jun 1993

5120-01-376-3875
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-376-3873
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-376-3874
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-376-3872
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-376-3646
Electrical Contact Inserter And Remover

013763646
M81969/31-04: RNCC: 4 | RNVC: 1

1 Jun 1993

5120-01-376-3645
Electrical Contact Inserter And Remover

013763645
M81969/31-02: RNCC: 4 | RNVC: 1

1 Jun 1993

5120-01-376-3647
Electrical Contact Inserter And Remover

013763647
M81969/31-01: RNCC: 4 | RNVC: 1

1 Jun 1993

5120-01-375-8951
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8952
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8948
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8949
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8950
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8947
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8944
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8945
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8946
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8601
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8600
Electrical Connector Adapter Tool

1 Jan 1900

5120-01-375-8602
Electrical Contact Remover

23 May 1993

5120-01-375-8534
Hand Screw Jack

013758534
A3163891-4: RNCC: 1 | RNVC: 2
M-10020-12: RNCC: 3 | RNVC: 2

23 May 1993

5120-01-375-8532
Hand Screw Jack

013758532
A3163891-1: RNCC: 1 | RNVC: 2
M-10020-9: RNCC: 3 | RNVC: 2

23 May 1993

5120-01-375-8533
Hand Screw Jack

013758533
A3163891-3: RNCC: 1 | RNVC: 2
M-10020-11: RNCC: 3 | RNVC: 2

23 May 1993

5120-01-375-8531
Hand Screw Jack

013758531
A3163891-2: RNCC: 1 | RNVC: 2
M-10020-10: RNCC: 3 | RNVC: 2

23 May 1993

5120-01-375-7952
Cross Tip Screwdriver

013757952
40-504: RNCC: 3 | RNVC: 2
40-504: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7951
Cross Tip Screwdriver

013757951
40-502: RNCC: 3 | RNVC: 2
40-502: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7953
Cross Tip Screwdriver

013757953
40-532: RNCC: 3 | RNVC: 2
40-532: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7950
Cross Tip Screwdriver

013757950
40-501: RNCC: 3 | RNVC: 2
40-501: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7948
Flat Tip Screwdriver

013757948
40-533: RNCC: 3 | RNVC: 2
40-533: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7946
Flat Tip Screwdriver

013757946
40-511: RNCC: 3 | RNVC: 2
40-511: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7947
Flat Tip Screwdriver

013757947
40-514: RNCC: 3 | RNVC: 2
40-514: RNCC: 3 | RNVC: 9

20 May 1993

5120-01-375-7755
Socket Wrench Socket

013757755
4144: RNCC: 3 | RNVC: 2

20 May 1993

5120-01-375-7756
Socket Wrench Socket

013757756
4146: RNCC: 3 | RNVC: 2

20 May 1993

5120-01-375-7754
Socket Wrench Socket

013757754
4142: RNCC: 3 | RNVC: 2

20 May 1993

5120-01-375-7061
Locating Pin

013757061
TD371C1-7: RNCC: 3 | RNVC: 2

19 May 1993

5120-01-375-7062
Locating Pin

013757062
TD371E1-17: RNCC: 3 | RNVC: 2

19 May 1993

Load More Results