What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

What is an Automatic Center Punch?

An Automatic Center Punch (PUNCH,CENTER,AUTOMATIC) is a spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

What is a Friction Igniter?

A Friction Igniter (IGNITER,FRICTION) is an item having a file and flint at one end which when rubbed together produce a spark.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

What is a Wood Caulking Iron?

A Wood Caulking Iron (CAULKING IRON,WOOD) is refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND; HAWSING IRON and YARNING IRON.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is an Edge Grip Sheet Metal Holder?

An Edge Grip Sheet Metal Holder (HOLDER,SHEET METAL,EDGE GRIP) is a U-shaped, center lever grip clamping device or a forceps operated, spring loaded clamping device designed to grip edges of two or more sheet metal parts in order to position, align, and/or hold the parts together.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Furnace And Flue Wire Brush?

A Furnace And Flue Wire Brush (BRUSH,WIRE,FURNACE AND FLUE) is an item having a wire fill section of varying cross-sectional shapes securely twisted in a stem wire which is extended to form a handle, or it has a means for attaching a handle.

What is a Boiler Tube Wire Brush?

A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

Hand Tools, Nonedged, Nonpowered - United States (US)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United States (US) - NCB is 00 to 09

Page 27 of 346

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United States

51	20	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United States (US)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 36 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 26 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is an Automatic Center Punch? 21 Items: An Automatic Center Punch (PUNCH,CENTER,AUTOMATIC) is a spring actuated center punch, which when pressed against an object forms an indentation mark without the use of a hammer. The force is adjustable by regulating the stroke.
What is a Hand Vise? 16 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Grommet Inserting Punch And Die? 44 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 192 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 406 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 1137 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 53 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Fuller,Bottom,Blacksmith's 11 Items
Swage,Bottom,Blacksmith's 22 Items
What is a Hand Tube Flaring Tool? 123 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 14 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 35 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 86 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 44 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 4056 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 14 Items
What is a Pipe Wrench? 269 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 863 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 241 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 31 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 131 Items
What is a Screwdriver Bit? 1696 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 88 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 7801 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 2682 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1038 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 89 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 836 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 14 Items
What is a Hand Tube Bender? 95 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1505 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 441 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Friction Igniter? 15 Items: A Friction Igniter (IGNITER,FRICTION) is an item having a file and flint at one end which when rubbed together produce a spark.
What is a Pinch Bar? 66 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 138 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 37 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 30 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 565 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Wood Caulking Iron? 12 Items: A Wood Caulking Iron (CAULKING IRON,WOOD) is refer to Reference Drawing Group A before using item name. See also CAULKING TOOL, HAND; HAWSING IRON and YARNING IRON.
What is a Pliers? 818 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 23 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 215 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 20 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 239 Items
What is an Edge Grip Sheet Metal Holder? 19 Items: An Edge Grip Sheet Metal Holder (HOLDER,SHEET METAL,EDGE GRIP) is a U-shaped, center lever grip clamping device or a forceps operated, spring loaded clamping device designed to grip edges of two or more sheet metal parts in order to position, align, and/or hold the parts together.
What is a Hole Sheet Metal Holder? 119 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Furnace And Flue Wire Brush? 25 Items: A Furnace And Flue Wire Brush (BRUSH,WIRE,FURNACE AND FLUE) is an item having a wire fill section of varying cross-sectional shapes securely twisted in a stem wire which is extended to form a handle, or it has a means for attaching a handle.
What is a Boiler Tube Wire Brush? 11 Items: A Boiler Tube Wire Brush (BRUSH,WIRE,BOILER TUBE) is a sectional item used to clean the internal surfaces of boiler tubes, condenser tubes, heat exchanger tubes, and the like. It may be hand-operated or power driven and of the expanding or nonexpanding type. It does not contain a scraper.
What is a Screwdriver And Wrench Assembly? 32 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 61 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Drill Drift? 24 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
Swaging Tool,Flexible Cable Terminal 20 Items
What is a Hand Nail Puller? 17 Items: A Hand Nail Puller (PULLER,NAIL,HAND) is a hand-held, hand-operated device, consisting of a handle fixed to a rammer which slides along a shaft having one pivoted jaw. The overall length may vary from 17 to 20 inches (431.8 to 508.0 millimeters) long.
Mattock 20 Items
What is a Socket Wrench Handle Bar? 53 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 17 Items
Riveter,Blind,Hand 124 Items
What is a Hand Shovel? 79 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 35 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 23 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Hand Storage Battery Carrier? 26 Items: A Hand Storage Battery Carrier (CARRIER,STORAGE BATTERY,HAND) is an item used to transport a battery in level position and provide positive placement control. It may consist of straps with battery post grips or adjustable tong type brackets with handles and battery case gripping jaws. It is designed to facilitate safe handling of a BATTERY, STORAGE and prevent breakage and accidental contact with spilled acid.
Block,Dolly,Sheet Metalworking 24 Items
What is a Piston Ring Compressor? 118 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Pike Pole? 19 Items: A Pike Pole is a hand tool consisting of a wood handle with a steel pike, with or without hook, secured on one end.
What is a Fuse Puller? 39 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Timber Wedge? 13 Items: A Timber Wedge (WEDGE,TIMBER) is refer to Reference Drawing Group AD before using item name.
What is a Hand Lead Seal Press? 15 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
Tamper,Hand 11 Items
What is a Hand Hammer? 1107 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Concrete Edger? 11 Items: A Concrete Edger (EDGER,CONCRETE) is a hand tool with a turned side edge having a specified radius at the bend. The handle is attached to the flat surface of the tool. An edger with the side edge turned up is considered an "inside type" whereas an edger with the side edge turned down is considered an "outside type." The end(s) may be curved or straight. It is used for finishing the edges of concrete sidewalks, paving, curbs and the like. See also CORNER TOOL, CONCRETE.
What is a Lamp Extractor? 47 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 24 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Hand Sleeve Bearing Burnisher? 15 Items: A Hand Sleeve Bearing Burnisher (BURNISHER,SLEEVE BEARING,HAND) is a tool designed for smoothing out the bore of a cylindrical bearing.
Jointer,Brick 16 Items
What is a Hand Pipe And Sewer Auger? 22 Items: A Hand Pipe And Sewer Auger (AUGER,PIPE AND SEWER,HAND) is a flexible spring wire or tape, with a cleaning or boring head at one or both ends. A handle may be provided for turning and pushing. It may also include a metal housing and/or reel in which the tape is coiled. Excludes AUGER, WATER CLOSET, HAND.
What is a Hand Roller? 40 Items: A Hand Roller (ROLLER,HAND) is a hand-held item consisting of a roller on an axle attached to a handle. The width of the roller face (surface) is more than 1/4 inch. See also STITCHER, CEMENTING AND VULCANIZING. Excludes INKING ROLLER, HAND and paint rollers.
What is a Trowel? 51 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Lubrication Fitting Tool? 12 Items: A Lubrication Fitting Tool is a combination tool having an extracting and rethreading tap acting as a T-handle, with double end socket wrench, to remove worn or broken high-pressure grease fittings.
What is a Stuffing Box And Pump Packing Extractor? 14 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Hand Abrasive Wheel Dresser? 41 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is an Engine Valve Seat Insert Knockout Tool? 13 Items: An Engine Valve Seat Insert Knockout Tool (KNOCKOUT TOOL,ENGINE VALVE SEAT INSERT) is a tool with an offset point so designed that when the point is placed against the portion of a valve seat insert, a hammer blow will remove the insert.
Replacing Tool,Engine Valve Seat Insert 20 Items
What is a Rivet Bucking Bar? 317 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 202 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 955 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is an Electric Melting Pot? 22 Items: An Electric Melting Pot (POT,MELTING,ELECTRIC) is a pot of single or double wall construction, heated by self-contained electrical elements and used to melt soft metals and alloys, wax, glue, and the like.
What is a Woven Cable Grip? 159 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Caulking Gun Nozzle? 96 Items: A Caulking Gun Nozzle (NOZZLE,CAULKING GUN) is an item of various configurations and opening size(s) through which semisolid materials are dispensed. It is usually designed to be threaded onto the end cap of a hand held tool.
What is a Screw Thread Insert Extractor? 24 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Armature Wedge Driver? 15 Items: An Armature Wedge Driver (DRIVER,ARMATURE WEDGE) is a hand tool designed for inserting and driving a wedge into the armature core, or stator winding, when winding or rewinding an armature.
What is a Basin Wrench? 16 Items: A Basin Wrench (WRENCH,BASIN) is a sliding tee handled wrench with jaw(s) designed to exert a turning force about an axis parallel with the leg of the handle. It is adaptable for close quarters and is used for basin nuts, ball cocks, and flush valves.
What is a Wire Splicing Clamp? 12 Items: A Wire Splicing Clamp (CLAMP,WIRE SPLICING) is a tool designed for use in effecting a connection of bare electrical wires by twisting two wires together, or by twisting conductors contained in a single and/or double tube sleeve.
What is a Friction Igniter Flint Tip? 12 Items: A Friction Igniter Flint Tip (FLINT TIP,FRICTION IGNITER) is an item consisting of a flint and mounting device for use with an IGNITER, FRICTION.
What is an Electron Tube Extractor? 42 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 593 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
Screwdriver,Clutch Tip 10 Items
What is a Swivel Knob Jeweler's Screwdriver? 62 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 100 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 452 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 21 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Valve Tappet Adjusting Tool? 19 Items: A Valve Tappet Adjusting Tool (ADJUSTING TOOL,VALVE TAPPET) is a hand device for adjusting overhead valve tappets of internal combustion engines. It consists of a handle, and at one end a wrench opening or a drive for a replaceable wrench socket, and a knob operated screwdriver tip. The wrench opening (or socket) engages the tappet adjusting screw lock nut and the screwdriver engages the screw.
What is a Hand Powered Poppet Valve Lapper? 29 Items: A Hand Powered Poppet Valve Lapper (LAPPER,POPPET VALVE,HAND POWERED) is a hand tool designed to rotate and/or oscillate poppet type valves in their seats for reseating purposes.
What is an Aligning Punch? 106 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 154 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 65 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 53 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 100 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 729 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Bung Wrench? 15 Items: A Bung Wrench (WRENCH,BUNG) is a nonadjustable wrench specifically designed to remove or replace threaded bung(s) on oil, gasoline, or solvent drums. Excludes WRENCH, SPANNER. See also WRENCH, DRAIN PLUG.
What is a Socket Wrench Ratchet Attachment? 51 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 44 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Crowfoot Socket Wrench Head Socket Adapter? 11 Items: A Crowfoot Socket Wrench Head Socket Adapter (ADAPTER,SOCKET,CROWFOOT SOCKET WRENCH HEAD) is an item with one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having a square external plug to fit into the internal square drive of a SOCKET, SOCKET WRENCH.
What is a Crowfoot Socket Wrench Head? 61 Items: A Crowfoot Socket Wrench Head (HEAD,CROWFOOT SOCKET WRENCH) is a component with a square internal drive eccentric to an open-wall opening designed to receive any of a series of wrenching sockets, adapters, or attachments. See also CROWFOOT ATTACHMENT, SOCKET WRENCH and SOCKET, CROWFOOT WRENCH HEAD.
What is a Crowfoot Wrench Head Socket? 77 Items: A Crowfoot Wrench Head Socket (SOCKET,CROWFOOT WRENCH HEAD) is a component with an open-wall opening having one end designed to fit into a HEAD, CROWFOOT SOCKET WRENCH and the other end having an internal opening such as hexagonal or 8-point. See also CROWFOOT ATTACHMENT, SOCKET WRENCH.
What is a Socket Wrench Crowfoot Attachment? 1353 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 121 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 165 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 96 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2137 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 2750 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 310 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 1826 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 111 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 10 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 13 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Tube Fitting Wrenching Socket? 33 Items: A Tube Fitting Wrenching Socket (SOCKET,WRENCHING,TUBE FITTING) is an item specifically designed to remove and replace copper, brass, or similar soft metal fittings without damaging same.
What is a Hand Contact Burnisher? 31 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Pin Vise? 39 Items: A Pin Vise (VISE,PIN) is a clamping device used to hold small items which are usually round. The device consists of a hollow handle having a chuck at one or both ends. The longitudinal axis of the hollow handle is in alignment with that of the chuck(s).
What is a Socket Head Screw Crowfoot Wrench Attachment? 16 Items: A Socket Head Screw Crowfoot Wrench Attachment (CROWFOOT WRENCH ATTACHMENT,SOCKET HEAD SCREW) is an attachment designed with a collar to fit into a HEAD, CROWFOOT SOCKET WRENCH having a hexagon plug (drive tang) extending therefrom.
What is a Tire Iron? 40 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 567 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 43 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Bench And Pipe Vise? 17 Items: A Bench And Pipe Vise (VISE,BENCH AND PIPE) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, each with integral or detachable pipe holding (serrated) jaws, and one or more guide bars or rods. Designed to be clamped or bolted to a bench, table or the like.
What is a Clamp Base Bench Vise? 14 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 108 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Prick Punch? 23 Items: A Prick Punch (PUNCH,PRICK) is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a tapered needlelike point which is ground to an included angle of approximately 25 degrees to 30 degrees. Excludes PUNCH, CENTER, SOLID; PUNCH, COPPERING.
What is a Nail Set? 39 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Ratcheting Crowfoot Wrench Set? 14 Items: A Ratcheting Crowfoot Wrench Set (WRENCH SET,CROWFOOT,RATCHETING) is a collection of various size SOCKET, CROWFOOT WRENCH HEAD; HEAD, CROWFOOT SOCKET WRENCH and handle(s). It may include universal joints, ratcheting adapters, and other attachments used therewith.
What is a Socket Wrench Set? 427 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 34 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 310 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 96 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 45 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Pin Straightener,Electron Tube 13 Items
What is a Spudger? 14 Items: A Spudger is a hand tool of nonconductive material with a conical point on one end and a chisel-like point on the other end. It is designed to locate or position electric leads in wired equipment.
What is a Wrench Kit? 53 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Scratch Awl? 43 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 83 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 173 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
Jack,Bumper 11 Items
Pick,Digging 13 Items
What is a Piston Ring Expander? 75 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Hand Electrical Conduit Bender? 33 Items: A Hand Electrical Conduit Bender (BENDER,ELECTRICAL CONDUIT,HAND) is a hand-actuated tool used for cold bending rigid electric conduit. It consists of a head having an opening to receive the conduit and has provision for attaching a pipe type handle. It may be furnished with or without a handle. Excludes benders for pipe, tube, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Joint Breaking Wedge? 12 Items: A Joint Breaking Wedge (WEDGE,JOINT BREAKING) is refer to Reference Drawing Group A before using item name.
Mallet,Plastic 10 Items
Mallet,Rawhide 18 Items
Mallet,Rubber 20 Items
What is a Wood Mallet? 18 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 19 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 29 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Pneumatic Tire Valve Repair Tool? 13 Items: A Pneumatic Tire Valve Repair Tool (REPAIR TOOL,PNEUMATIC TIRE VALVE) is a four-way hand tool designed to repair valve stem cap threads, inside valve core threads, to smooth valve mouths, and to insert or remove valve cores for standard or large bore tire valves. See also INSERTER AND REMOVER, PNEUMATIC TIRE VALVE CORE.
What is a Hand Tube Swaging Tool Kit? 31 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Swaging Punch? 20 Items: A Hand Tube Swaging Punch (PUNCH,TUBE SWAGING,HAND) is a noncutting punchlike tool, having a formed shank on one end and a flared head on the other, designed for enlarging inside diameters of ductile metallic tubing to permit insertion of tubing of the same size. In use, the tool is driven into the end of tubing clamped in a tube flaring bar which is not included with this item. See also SWAGING TOOL KIT, TUBE, HAND.
What is a Jeweler's Staking Tool? 14 Items: A Jeweler's Staking Tool (STAKING TOOL,JEWELER'S) is an item consisting of a staking frame and die, having additional punches and stumps. The punches may or may not be inverted and used as stumps. Used to remove and/or replace wheel staffs and the like. Excludes FRICTION JEWELING KIT, JEWELER'S.
What is a Hand Tube Belling Punch? 12 Items: A Hand Tube Belling Punch (PUNCH,TUBE BELLING,HAND) is a noncutting punchlike tool having a shaped head on one end which is designed to bell out and solidly seat the ends of condenser tubes, evaporator tubes, and the like when the tube is installed in the tube sheet. It is generally used after the flaring operation.
What is a Hand Screw? 19 Items: A Hand Screw is a clamping device consisting of two wood or wood faced jaws, actuated by two, handled, metal or wood spindle screws. The spindle screws operate independently to permit the jaws to be set at an angle to each other.
What is a Hose Strap Band Clamping Tool? 18 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Socket Wrench Handle Ratchet Head? 46 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 3789 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 188 Items
What is a Hand Tube Bender Set? 10 Items: A Hand Tube Bender Set (BENDER SET,TUBE,HAND) is a group of BENDER, TUBE, HAND having different characteristics. See also BENDER SET, ELECTRICAL CONDUIT, HAND.
What is a Slip Joint Pliers? 363 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 29 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 476 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 105 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 494 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 180 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 83 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 30 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is a Torch And Regulator Wrench? 12 Items: A Torch And Regulator Wrench (WRENCH,TORCH AND REGULATOR) is a nonadjustable tool having multisize openings for turning mixing head nuts, hose connection nuts, cylinder connection nuts, and the like on welding and cutting outfits.
What is an Inspection Mirror? 177 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 31 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 59 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Hand Hydraulic Jack Kit? 25 Items: A Hand Hydraulic Jack Kit (JACK KIT,HYDRAULIC,HAND) is an item consisting of one or more JACK, HYDRAULIC, HAND with various attachments to harness the ram action for pulling, clamping, lifting, spreading, pressing and/or bending in addition to the pushing action of the hydraulic hand jack.
What is an Internal Gripping Pipe Wrench? 17 Items: An Internal Gripping Pipe Wrench (WRENCH,PIPE,INTERNAL GRIPPING) is a hand tool designed to be inserted into the end of nipples and pipes, and grip the inner surface by a cam or expansion action. It is used to turn items which may not protrude sufficiently to grip externally, or where an exterior plating or thread may not be marred. The tool is turned by applying a wrench to the protruding section.
What is a Flat Tip-Cross Tip Screwdriver? 13 Items: A Flat Tip-Cross Tip Screwdriver (SCREWDRIVER,FLAT TIP-CROSS TIP) is a manual screwdriver having a single, reversible blade with one flat tip and one cross tip. The item is designed to securely retain the blade in the handle, yet permit instantaneous removal and insertion.
What is a Drive Pin Punch Set? 46 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is a Drift Punch Set? 17 Items: A Drift Punch Set (PUNCH SET,DRIFT) is a group of PUNCH, DRIFT having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 11 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 66 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Hand Sheet Metal Pipe Crimping Tool? 20 Items: A Hand Sheet Metal Pipe Crimping Tool (CRIMPING TOOL,SHEET METAL PIPE,HAND) is a hand tool designed for contracting the ends of sheet metal pipe by crimping. The crimping roll type consists of a set of two crimping rolls which are rotated by means of two handles and a ratchet. The length of crimp is adjustable. The formed jaw type is a plierlike tool having two mating formed jaws which form a single indentation with each closing of the jaws upon the metal.
What is a Solid Center Punch? 111 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 19 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is a Brake Shoe Adjusting Tool? 23 Items: A Brake Shoe Adjusting Tool (ADJUSTING TOOL,BRAKE SHOE) is a bar of steel having flat, angled, blade ends designed to insert through the slot in a brake back plate to turn the brake shoe adjusting nut by a prying action.
What is a Hand Yoke Riveter? 60 Items: A Hand Yoke Riveter (RIVETER,YOKE,HAND) is a hand tool designed to install metallic grommets and/or tubular rivets by forcing the unflanged end of the grommet/rivet outward to form another flange which prevents the grommet/rivet from coming out of the item it has been installed in. The tool uses a pliers type pinching action to form the flange. See also PUNCH, EYELET, PLIER TYPE.
What is an Electronic Equipment Tuning Wand? 13 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is an Inserted Hammer Face Holder? 110 Items: An Inserted Hammer Face Holder (HOLDER,INSERTED HAMMER FACE) is a HAMMER, HAND of the inserted face style, furnished without FACE, HAMMER, INSERTED.
What is a Combination Open End And Spanner Wrench? 34 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 25 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Cantilever Jaw Clamp? 13 Items: A Cantilever Jaw Clamp (CLAMP,CANTILEVER JAW) is a clamping device consisting of two L-shaped members, the long leg of one attached to, and pivots on, the long leg of the other member. Both short legs of each member terminate in freely rotating square pressure pads. One face of each pressure pad has a V-groove. The clamping operation is actuated by a screw which pivots on both members. It is used for holding round or flat objects with parallel or nonparallel surfaces.
What is a Hand Material Handling Hook? 15 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 102 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 250 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Spanner Wrench Handle? 33 Items: A Spanner Wrench Handle (HANDLE,SPANNER WRENCH) is a hand tool designed to mate with the threaded end of a spanner wrench or it is unthreaded and designed to slip onto the wrench. It is used to provide leverage.
What is a Combination Box And Open End Box Wrench? 46 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Combination Box And Open End Box Wrench Set? 12 Items: A Combination Box And Open End Box Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END BOX) is a group of WRENCH, BOX AND OPEN END BOX, COMBINATION having various sizes.
What is an Electrical Connector Pin Straightener? 19 Items: An Electrical Connector Pin Straightener (PIN STRAIGHTENER,ELECTRICAL CONNECTOR) is a hand tool designed with a longitudinal hole in one or both end(s) to fit over a pin contact of an electrical connector. It is used to straighten or align the contact(s) of the connector.
What is a Mechanical Puller Forcing Screw? 40 Items: A Mechanical Puller Forcing Screw (FORCING SCREW,MECHANICAL PULLER) is a cylindrical, threaded item which may be headed or headless. It may include a threadless portion. All or part of the unthreaded portion(s) must be of a single diameter equal to or smaller than the maximum major diameter of the threaded portion(s). Headless items must have an external or internal wrenching feature or have a provision to facilitate turning. The item must be designed to exert pressure by screwing motion when used with a mechanical puller.
What is a Screw Thread Insert Inserter? 239 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 39 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 658 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Screwdriver Bit Extension? 24 Items: A Screwdriver Bit Extension (EXTENSION,SCREWDRIVER BIT) is an item having one end designed to fit into the end of a screwdriver bit handle and the opposite end designed to accommodate a screwdriver bit. It is specifically designed to extend the length of a screwdriver bit.
What is a Torque Wrench Multiplier? 125 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Bushing Driver Set? 63 Items: A Bushing Driver Set is a group of various sized bushing drivers designed to install and remove bushings. It may include driver nuts, adapters, and the like.
What is a Screw Thread Insert Tang Breakoff Tool? 62 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is a Multiposition Vise? 33 Items: A Multiposition Vise (VISE,MULTIPOSITION) is a clamping device consisting of a workholding head and a base provided with swiveling, tilting, and locking arrangement. Designed to be bolt mounted to a bench, table, or the like and constructed so that the workholding head can be swiveled 360 degrees (6.3 radians) in a horizontal plane and tilted from a normal level position downward at least 90 degrees (1.6 radians), and locked in any desired position within the swiveling and tilting ranges. Intended for use in manufacturing and maintenance of mechanical and electronic parts and assemblies or any light bench work. See also VISE, PATTERNMAKER'S.
What is an Adjustable Wrench? 394 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 858 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 71 Items
Handle,Shovel 12 Items
What is a Socket Wrench Spanner Attachment? 141 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Torque Wrench Set? 31 Items: A Torque Wrench Set (WRENCH SET,TORQUE) is an assortment or two or more torque wrenches or various sizes. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH; and BIT, SCREWDRIVER.
What is a Retaining Ring Installation Tool? 144 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 32 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Socket Wrench Spanner Attachment Set? 12 Items: A Socket Wrench Spanner Attachment Set (SPANNER ATTACHMENT SET,SOCKET WRENCH) is an item having an adjustable or fixed span of pin and/or key type ends that may be replacable.
What is a Bearing And Bushing Inserter Set? 21 Items: A Bearing And Bushing Inserter Set (INSERTER SET,BEARING AND BUSHING) is a group of two or more INSERTER, BEARING AND BUSHING having different characteristics.
What is a Bearing And Bushing Inserter? 1710 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 332 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 1086 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 111 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 405 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 830 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 182 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Preformed Packing Remover? 49 Items: A Preformed Packing Remover (REMOVER,PREFORMED PACKING) is a hand tool designed to remove a PACKING, PREFORMED.
What is a Drill Guide? 140 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Hand Fiber Optic Contact Crimping Tool? 12 Items: A Hand Fiber Optic Contact Crimping Tool (CRIMPING TOOL,FIBER OPTIC CONTACT,HAND) is a hand held tool designed to install various types of CONTACT, FIBER OPTIC on optical conductors.
What is a Connector Fiber Optic Contact Removal Tool? 23 Items: A Connector Fiber Optic Contact Removal Tool (REMOVAL TOOL,CONNECTOR FIBER OPTIC CONTACT) is an item used to disassemble CONTACT, FIBER OPTIC from a CONNECTOR, PLUG, FIBER OPTIC or a CONNECTOR, RECEPTACLE, FIBER OPTIC.
What is a Leveling-Support Jack? 322 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Square Tip Screwdriver? 14 Items: A Square Tip Screwdriver (SCREWDRIVER,SQUARE TIP) is a manual screwdriver having a single nonremoveable blade with a tip for driving and removing screws with a square recessed head.
What is a Six Point Tip Screwdriver? 165 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 109 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 295 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 27 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 69 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 69 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 161 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 85 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Bearing And Bushing Inserter And Remover Set? 63 Items: A Bearing And Bushing Inserter And Remover Set (INSERTER AND REMOVER SET,BEARING AND BUSHING) is a group of two or more INSERTER AND REMOVER, BEARING AND BUSHING having different characteristics.
What is a Piston Inserter? 59 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 59 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 77 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 32 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 25 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Stud Remover Set? 11 Items: A Stud Remover Set (REMOVER SET,STUD) is a group of various sized items designed to remove or extract studs. It may include guides, collets, collet housings, holders, and the like. It is without facilities to drive or set studs. See also INSERTER AND REMOVER, STUD AND INSERTER, STUD.
What is a Gear Inserter? 44 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 748 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 56 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Leveling-Support Jack Set? 10 Items: A Leveling-Support Jack Set (JACK SET,LEVELING-SUPPORT) is consists of two or more JACK, LEVELING-SUPPORT.
What is a Hand Optical Fiber Burnisher? 14 Items: A Hand Optical Fiber Burnisher (BURNISHER,OPTICAL FIBER,HAND) is a hand-held, hand-operated item designed to polish the ends of FIBER, OPTIC to a smooth surface.
What is a Float? 29 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 45 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 35 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Lifting Pneumatic Bag Kit? 14 Items: A Lifting Pneumatic Bag Kit (PNEUMATIC BAG KIT,LIFTING) is a collection of items consisting of two or more PNEUMATIC BAG, LIFTING, connecting cords, lanyards, feeding hoses and the like required for lifting an item when normal jacking conditions are not applicable. May include items for packaging the individual parts.
What is a Cable Tie Installation Tool? 50 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Nonsurgical Forceps? 21 Items: A Nonsurgical Forceps (FORCEPS,NONSURGICAL) is a device designed to hold another item by grasping it in its jaws and retaining the grasp with a snap-lock type catch on its handles. It will have straight or curved, needle nose type jaws and handles with thumb and finger holes. For items designed for surgical use see FORCEPS (as modified). For items without a catch type device on the handles see PLIERS and PLIERS (as modified). See also HEAT SINK, SOLDERING AID.
What is a Bearing Staking Installation Tool? 146 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 62 Items
What is a Sealant Dispenser? 75 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 60 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Six Point Tip Screwdriver Set? 26 Items: A Six Point Tip Screwdriver Set (SCREWDRIVER SET,SIX POINT TIP) is a group of SCREWDRIVER, SIX POINT TIP having different characteristics.
What is a Ring Retaining Pliers Tip Set? 11 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 31 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Bearing Installation Tool Base? 49 Items: A Bearing Installation Tool Base (TOOL BASE,BEARING INSTALLATION) is the base of a hand tool used for seating bearings. It may be attached to a DRILLING MACHINE (as modified) to secure bearings wherever necessary to contain the bearing within its assembly.
What is a Torque Wrench Adapter Set? 40 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 37 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is a Torque Handle? 24 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Hand Vise Jaw? 15 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 69 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Fin Straightener? 12 Items: A Fin Straightener (STRAIGHTENER,FIN) is an item designed to straighten refrigerator evaporator fins, heat exchanger fins and the like.
What is a Wire Twister Pliers? 62 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 1496 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Socket Wrench Crowfoot Attachment Set? 55 Items: A Socket Wrench Crowfoot Attachment Set (CROWFOOT ATTACHMENT SET,SOCKET WRENCH) is a group of various sized CROWFOOT ATTACHMENT, SOCKET WRENCH. It may include a holder or the like. Excludes WRENCH SET, CROWFOOT, RATCHETING.
What is a Mechanical Puller Body? 13 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 116 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 89 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 66 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Blind Riveter Nosepiece? 23 Items: A Blind Riveter Nosepiece (NOSEPIECE,RIVETER,BLIND) is an item specifically designed for use with a RIVETER, BLIND (as modified).
What is a Torque Wrench Adapter? 1905 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 59 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 112 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 43 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 32 Items
What is a Splicing Sleeve Compressing Tool? 68 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 16 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Full Tracked Vehicle Track Connecting Fixture? 19 Items: A Full Tracked Vehicle Track Connecting Fixture (FIXTURE,TRACK CONNECTING,FULL TRACKED VEHICLE) is a fixture used to pull together two track ends, of a full tracked vehicle, for the purpose of connection. May also be used for holding the tension of a track while replacing a link.
Handle,Hydraulic Jack 32 Items
Handle,Mechanical Jack 35 Items
What is a Hand Hose Fitting Swaging Tool Kit? 24 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 19 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 24 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is an Electronics Pliers? 12 Items: An Electronics Pliers (PLIERS,ELECTRONICS) is a tool with clamping jaws for special works in the field of microelectronics and on circuit boards. See also PLIERS and PLIERS (as modified).
What is a Drift? 157 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Fish Tape? 26 Items: A Fish Tape (TAPE,FISH) is excludes FISHING TOOL, ELECTRICAL LEAD.
What is a Nutdriver? 634 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 37 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Nutdriver Set? 61 Items: A Nutdriver Set is an assortment of NUTDRIVER'S having various sizes, all of which have a screwdriver style handle, shaft and formed female hex or square socket at the driving end.
What is a Switch Adjusting Tool? 10 Items: A Switch Adjusting Tool (ADJUSTING TOOL,SWITCH) is an item used to adjust the quick acting mechanism of a SWITCH, SENSITIVE and other switches as modified.
What is a Ball Joint Installation Tool? 16 Items: A Ball Joint Installation Tool (INSTALLATION TOOL,BALL JOINT) is an item used to mount a BALL JOINT.
What is a Ball Joint Removal Tool? 13 Items: A Ball Joint Removal Tool (REMOVAL TOOL,BALL JOINT) is an item used to remove a BALL JOINT.
What is a Hydraulic Fitting Crimping Tool Head? 15 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Socket Wrench Extension Set? 34 Items: A Socket Wrench Extension Set (EXTENSION SET,SOCKET WRENCH) is a group of EXTENSION, SOCKET WRENCH having various characteristics.
What is a Torque Screwdriver? 216 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Starter Punch? 102 Items: A Starter Punch (PUNCH,STARTER) is a hand tool for installing and removing pins and keys and removing rivets. The point is tapered round with a blunt face. Excludes PUNCH, CENTER, SOLID.
What is a Special Purpose Combination Wrench? 46 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 71 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 49 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.
What is a Pole Extension? 31 Items: A Pole Extension (EXTENSION,POLE) is an item designed to be mounted on a telescopic or rigid pole that is used to increase its length.
What is a Pry Bar Set? 15 Items: A Pry Bar Set (BAR SET,PRY) is a group of PRY Bars having different characteristics.
What is a Hand Pick And Hook Set? 12 Items: A Hand Pick And Hook Set (PICK AND HOOK SET,HAND) is a group of two or more hooks having different sizes and characteristics for insertion and removal o-rings, gaskets and springs.
What is a Strap Wrench? 40 Items: A Strap Wrench (WRENCH,STRAP) is wrench which primarily consists of a handle provided with a strap or girth. It is designed to impart a rotary movement of force to a cylindrical part or without footprint for tool receiving. For items specially designed for oil filters or tubes see CLE,OIL FILTER (53484) or CLE TUBE CLAMP (03492).
What is a Cotter Key Puller? 11 Items: A Cotter Key Puller (PULLER,COTTER KEY) is a hand tool with a curved tip for prying loose cotter keys (pins).
What is a Mechanical Puller Section? 16 Items: A Mechanical Puller Section (PULLER SECTION,MECHANICAL) is an item which constitutes a part of a PULLER,MECHANICAL (18913). Do not use if a more specific designation is appropriate. Excludes: BODY,PULLER,MECHANICAL (53210);STEP PLATE, MECHANICAL PULLER (20185).

Stock Items From Supply Class 5120 Page 27 of 346

5120-01-430-9454

5 May 1996

NSN 5120-01-430-9462 014309462 KEY SET,SOCKET HEAD SCREW

5120-01-430-9462
Socket Head Screw Key Set

014309462
11SA: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9459

5 May 1996

5120-01-430-9460
Screwdriver Bit

014309460
70122: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9444
Screwdriver Bit

014309444
70064: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9443
Screwdriver Bit

014309443
70052: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9448
Socket Wrench Screwdriver Attachment Set

014309448
SBD8R: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9456
Screwdriver Bit

014309456
70082: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9450
Screwdriver Bit

014309450
440-3I: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9455

5 May 1996

5120-01-430-9453

5 May 1996

5120-01-430-9458
Screwdriver Bit

014309458
70072: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9438
Screwdriver Bit

014309438
70012: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9442
Screwdriver Bit

014309442
70068: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9439
Screwdriver Bit

014309439
70032: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9445
Screwdriver Bit

014309445
440-TX-27I: RNCC: 3 | RNVC: 2

5 May 1996

NSN 5120-01-430-9441 014309441 KEY SET,SOCKET HEAD SCREW

5120-01-430-9441
Socket Head Screw Key Set

014309441
10018: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9440
Screwdriver Bit

014309440
70062: RNCC: 3 | RNVC: 2

5 May 1996

5120-01-430-9437
Screwdriver Bit

014309437
70014: RNCC: 3 | RNVC: 2

5 May 1996

NSN 5120-01-430-9434 014309434 KEY SET,SOCKET HEAD SCREW

5120-01-430-9434
Socket Head Screw Key Set

014309434
20812: RNCC: 3 | RNVC: 2

5 May 1996

NSN 5120-01-430-9427 014309427 WRENCH,TAP AND REAMER

5120-01-430-9427
Tap And Reamer Wrench

014309427
93D: RNCC: 3 | RNVC: 2
50430: RNCC: 5 | RNVC: 2

5 May 1996

NSN 5120-01-430-9426 014309426 WRENCH,TAP AND REAMER

5120-01-430-9426
Tap And Reamer Wrench

014309426
93B: RNCC: 3 | RNVC: 2
50428: RNCC: 5 | RNVC: 2

5 May 1996

5120-01-430-9432
Tap And Reamer Wrench

014309432
91B: RNCC: 3 | RNVC: 2

5 May 1996

NSN 5120-01-430-9435 014309435 KEY SET,SOCKET HEAD SCREW

5120-01-430-9435
Socket Head Screw Key Set

5 May 1996

5120-01-430-9429
Tap And Reamer Wrench

014309429
93F: RNCC: 3 | RNVC: 2

5 May 1996

NSN 5120-01-430-9428 014309428 WRENCH,TAP AND REAMER

5120-01-430-9428
Tap And Reamer Wrench

014309428
93E: RNCC: 3 | RNVC: 2
50431: RNCC: 5 | RNVC: 2

5 May 1996

5120-01-430-8956

3 May 1996

5120-01-430-8952
Starter Punch

014308952
B107.48: RNCC: 3 | RNVC: 1
220: RNCC: 3 | RNVC: 2
220: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8948
Starter Punch

014308948
225: RNCC: 3 | RNVC: 2
225: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8955
Flat Tip And Cross Tip Screwdriver Set

3 May 1996

5120-01-430-8938

3 May 1996

5120-01-430-8931

3 May 1996

5120-01-430-8915
Starter Punch

014308915
B107.48: RNCC: 3 | RNVC: 1
226: RNCC: 3 | RNVC: 2
226: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8927
Starter Punch

014308927
B107.48: RNCC: 3 | RNVC: 1
221: RNCC: 3 | RNVC: 2
221: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8914

3 May 1996

5120-01-430-8659
Socket Wrench Screwdriver Attachment Set

014308659
41-1650: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8660
Socket Wrench Screwdriver Attachment Set

014308660
41-1750: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8623
Assorted Punch Set

014308623
33-801: RNCC: 3 | RNVC: 2
33-801: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8621
Hand Hammer

014308621
81-252: RNCC: 3 | RNVC: 2
81-252: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8616
Hand Hammer

014308616
81-111: RNCC: 3 | RNVC: 2
81-111: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8622
Drift Punch Set

014308622
33-800: RNCC: 3 | RNVC: 2
33-800: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8612
Screw Extractor Set

014308612
2419: RNCC: 3 | RNVC: 2
2419: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8619
Retaining Ring Pliers

014308619
2534: RNCC: 3 | RNVC: 2
2534: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8617
Hand Hammer

014308617
81-112: RNCC: 3 | RNVC: 2
81-112: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8607
Pliers

014308607
135: RNCC: 3 | RNVC: 2
135: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8613
Hand Hammer

014308613
81-110: RNCC: 3 | RNVC: 2
81-110: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8609
Retaining Ring Pliers

014308609
2396: RNCC: 3 | RNVC: 2
2396: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8608
Spark Plug Boot Puller

014308608
2568: RNCC: 3 | RNVC: 2
2568: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8611
Retaining Ring Pliers

014308611
2395: RNCC: 3 | RNVC: 2
2395: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8610
Retaining Ring Pliers

014308610
456: RNCC: 3 | RNVC: 2
456: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8603
Retaining Ring Pliers

014308603
446: RNCC: 3 | RNVC: 2
446: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8605
Hand Hammer

014308605
81-254: RNCC: 3 | RNVC: 2
81-254: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8606
Retaining Ring Pliers

014308606
455: RNCC: 3 | RNVC: 2
455: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8604
Retaining Ring Pliers

014308604
445: RNCC: 3 | RNVC: 2
445: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8601
Electrical Contact Inserter

014308601
81969/8-207: RNCC: 2 | RNVC: 2
MIL-I-81969: RNCC: 4 | RNVC: 1
DAK83-16B: RNCC: 5 | RNVC: 1

3 May 1996

5120-01-430-8598
Screwdriver Bit

014308598
42-2050C: RNCC: 3 | RNVC: 2
42-2050C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8591
Screwdriver Bit

014308591
41-2303: RNCC: 3 | RNVC: 2
41-2303: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8602
Slip Joint Pliers

014308602
45-710: RNCC: 3 | RNVC: 2
45-710: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8599
Screwdriver Bit

014308599
42-2055C: RNCC: 3 | RNVC: 2
42-2055C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8600
Inspection Mirror

014308600
2840: RNCC: 3 | RNVC: 1

3 May 1996

5120-01-430-8595
Torque Wrench

014308595
2951: RNCC: 3 | RNVC: 2
2951: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8596
Screwdriver Bit

014308596
41-2308: RNCC: 3 | RNVC: 2
41-2308: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8592
Torque Screwdriver

014308592
3416: RNCC: 3 | RNVC: 2
3416: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8593
Screwdriver Bit

014308593
41-2306: RNCC: 3 | RNVC: 2
41-2306: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8594
Screwdriver Bit

014308594
41-2304: RNCC: 3 | RNVC: 2
41-2304: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8590
Box Wrench

014308590
62-129: RNCC: 3 | RNVC: 2
62-129: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8588
Screwdriver Bit

014308588
41-2216: RNCC: 3 | RNVC: 2
41-2216: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8587
Screwdriver Bit

014308587
41-2224: RNCC: 3 | RNVC: 2
41-2224: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8589
Torque Screwdriver

014308589
3415: RNCC: 3 | RNVC: 2
3415: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8574
Screwdriver Bit

014308574
42-2030C: RNCC: 3 | RNVC: 2
42-2030C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8581
Screwdriver Bit

014308581
41-2214: RNCC: 3 | RNVC: 2
41-2214: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8583
Box Wrench

014308583
62-126: RNCC: 3 | RNVC: 2
62-126: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8582
Screwdriver Bit

014308582
41-2305: RNCC: 3 | RNVC: 2
41-2305: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8584
Box Wrench

014308584
62-128: RNCC: 3 | RNVC: 2
62-128: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8586
Box Wrench

014308586
62-132: RNCC: 3 | RNVC: 2
62-132: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8576
Box Wrench

014308576
62-116: RNCC: 3 | RNVC: 2
62-116: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8572
Screwdriver Bit

014308572
42-2027C: RNCC: 3 | RNVC: 2
42-2027C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8569
Box Wrench

014308569
62-114: RNCC: 3 | RNVC: 2
62-114: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8573
Screwdriver Bit

014308573
41-2220: RNCC: 3 | RNVC: 2
41-2220: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8579
Torque Screwdriver

014308579
B107.300: RNCC: 3 | RNVC: 1
B107.14: RNCC: 5 | RNVC: 1
B107.14 TY3CLAST1DEB: RNCC: 5 | RNVC: 1
B107.14M: RNCC: 5 | RNVC: 9
B107.14M TY3CLAST1DEB: RNCC: 5 | RNVC: 9
3417: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8580
Screwdriver Bit

014308580
41-2212: RNCC: 3 | RNVC: 2
41-2212: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8578
Screwdriver Bit

014308578
42-2040C: RNCC: 3 | RNVC: 2
42-2040C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8577
Box Wrench

014308577
62-118: RNCC: 3 | RNVC: 2
62-118: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8568
Screwdriver Bit

014308568
41-2210: RNCC: 3 | RNVC: 2
41-2210: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8571
Screwdriver Bit

014308571
42-2020C: RNCC: 3 | RNVC: 2
42-2020C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8570
Socket Wrench Screwdriver Attachment

3 May 1996

5120-01-430-8575
Box Wrench

014308575
62-124: RNCC: 3 | RNVC: 2
62-124: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8555
Torque Wrench

014308555
3262: RNCC: 3 | RNVC: 2
3262: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8566
Box Wrench

014308566
62-120: RNCC: 3 | RNVC: 2
62-120: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8561
Socket Wrench Adapter

3 May 1996

5120-01-430-8562
Screwdriver Bit

014308562
42-2010C: RNCC: 3 | RNVC: 2
42-2010C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8567
Screwdriver Bit

014308567
42-2015C: RNCC: 3 | RNVC: 2
42-2015C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8565
Socket Wrench Screwdriver Attachment

3 May 1996

5120-01-430-8541
Socket Wrench Set

014308541
91-202: RNCC: 3 | RNVC: 2
91-202: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8563
General Mechanic's Tool Kit

014308563
13901: RNCC: 3 | RNVC: 2
13901: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8553
Socket Wrench Set

014308553
91-331: RNCC: 3 | RNVC: 2
91-331: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8554
Screwdriver Bit Set

3 May 1996

5120-01-430-8564
Socket Wrench Screwdriver Attachment

3 May 1996

5120-01-430-8560
Screwdriver Bit

014308560
42-2025C: RNCC: 3 | RNVC: 2
42-2025C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8558
Socket Wrench Set

014308558
91-405: RNCC: 3 | RNVC: 2
91-405: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8549
Socket Wrench Socket Set

014308549
91-332: RNCC: 3 | RNVC: 2
91-332: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8559
Socket Wrench Socket Set

014308559
91-324C: RNCC: 3 | RNVC: 2
91-324C: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8544
Socket Wrench Set

014308544
91-206: RNCC: 3 | RNVC: 2
91-206: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8552
Socket Wrench Set

014308552
91-333: RNCC: 3 | RNVC: 2
91-333: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8551
Socket Wrench Set

014308551
91-404: RNCC: 3 | RNVC: 2
91-404: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8550
Torque Wrench

014308550
3263: RNCC: 3 | RNVC: 2
3263: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8538
General Mechanic's Tool Kit

014308538
19612: RNCC: 3 | RNVC: 2
19612: RNCC: 3 | RNVC: 9
19612: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8536
Socket Wrench Set

014308536
91-317: RNCC: 3 | RNVC: 2
91-317: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8548
Socket Wrench Set

014308548
91-330: RNCC: 3 | RNVC: 2
91-330: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8543
Socket Wrench Socket Set

014308543
91-290: RNCC: 3 | RNVC: 2
91-290: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8542
Socket Wrench Set

014308542
91-307: RNCC: 3 | RNVC: 2
91-307: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8537
Socket Wrench Socket Set

014308537
91-246: RNCC: 3 | RNVC: 2
91-246: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8531
Socket Wrench Socket Set

014308531
91-275: RNCC: 3 | RNVC: 2
91-275: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8516
Socket Wrench Set

014308516
91-160: RNCC: 3 | RNVC: 2
91-160: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8533
Socket Wrench Set

014308533
91-218: RNCC: 3 | RNVC: 2
91-218: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8532
Socket Wrench Socket Set

014308532
91-245: RNCC: 3 | RNVC: 2
91-245: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8525
Socket Wrench Set

014308525
91-273: RNCC: 3 | RNVC: 2
91-273: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8527
Socket Wrench Set

014308527
91-272: RNCC: 3 | RNVC: 2
91-272: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8524
Socket Wrench Socket Set

014308524
91-276: RNCC: 3 | RNVC: 2
91-276: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8520
Socket Wrench Set

014308520
91-274: RNCC: 3 | RNVC: 2
91-274: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8521
Socket Wrench Socket

014308521
52-1846: RNCC: 3 | RNVC: 2
52-1846: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8515
Socket Wrench Socket

014308515
52-1840: RNCC: 3 | RNVC: 2
52-1840: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8484
Solid Center Punch

014308484
ALN25647: RNCC: 3 | RNVC: 2
25647: RNCC: 5 | RNVC: 9
25647: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8486
Tapered Punch Set

014308486
25636: RNCC: 3 | RNVC: 2
25636: RNCC: 3 | RNVC: 9
25636: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8479
Starter Punch

014308479
25644: RNCC: 3 | RNVC: 2
25644: RNCC: 3 | RNVC: 9
25644: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8477
Starter Punch

014308477
25642: RNCC: 3 | RNVC: 2
25642: RNCC: 3 | RNVC: 9
25642: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8478
Starter Punch

014308478
B107.410: RNCC: 3 | RNVC: 1
B107.48 TY2CL8: RNCC: 5 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY2CL8: RNCC: 5 | RNVC: 1
25639: RNCC: 5 | RNVC: 2
25639: RNCC: 5 | RNVC: 9
25639: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8482
Starter Punch

014308482
25641: RNCC: 3 | RNVC: 2
25641: RNCC: 3 | RNVC: 9
25641: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8488
Drive Pin Punch Set

014308488
25630: RNCC: 3 | RNVC: 2
25630: RNCC: 3 | RNVC: 9
25630: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8485
Solid Center Punch

3 May 1996

5120-01-430-8480
Starter Punch

014308480
25643: RNCC: 3 | RNVC: 2
25643: RNCC: 3 | RNVC: 9
25643: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8475
Box Wrench

014308475
66-222: RNCC: 3 | RNVC: 2
66-222: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8469
Combination Box And Open End Wrench

014308469
66-418: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8472
Box Wrench

014308472
63-916: RNCC: 3 | RNVC: 2
63-916: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8447
Combination Box And Open End Wrench

014308447
66-014: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8450
Screwdriver Bit

014308450
41-2412: RNCC: 3 | RNVC: 2
41-2412: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8473
Box Wrench

014308473
66-218: RNCC: 3 | RNVC: 2
66-218: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8476
Starter Punch

014308476
25640: RNCC: 3 | RNVC: 2
25640: RNCC: 3 | RNVC: 9
25640: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8453
Combination Box And Open End Wrench

014308453
66-015: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8474
Box Wrench

014308474
66-213: RNCC: 3 | RNVC: 2
66-213: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8470
Combination Box And Open End Wrench

014308470
66-010: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8439
Screwdriver Bit

014308439
41-2414: RNCC: 3 | RNVC: 2
41-2414: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8424
Box Wrench Set

014308424
29302B: RNCC: 3 | RNVC: 2
29302B: RNCC: 3 | RNVC: 9
29302B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8468
Combination Box And Open End Wrench

014308468
66-408: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8467
Combination Box And Open End Wrench

014308467
66-422: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8466
Box Wrench

014308466
66-215: RNCC: 3 | RNVC: 2
66-215: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8465
Combination Box And Open End Wrench

014308465
66-420: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8440
Screwdriver Bit

014308440
41-2401: RNCC: 3 | RNVC: 2
41-2401: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8459
Combination Box And Open End Wrench

014308459
66-018: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8463
Box Wrench

014308463
63-912: RNCC: 3 | RNVC: 2
63-912: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8464
Combination Box And Open End Wrench

014308464
66-412: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8461
Combination Box And Open End Wrench

014308461
66-024: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8460
Combination Box And Open End Wrench

014308460
66-409: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8462
Combination Box And Open End Wrench

014308462
66-416: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8448
Combination Box And Open End Wrench

014308448
66-016: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8457
Combination Box And Open End Wrench

014308457
66-411: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8456
Combination Box And Open End Wrench

014308456
66-012: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8458
Screwdriver Bit

014308458
41-2413: RNCC: 3 | RNVC: 2
41-2413: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8427
Screwdriver Bit

014308427
41-2404: RNCC: 3 | RNVC: 2
41-2404: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8455
Combination Box And Open End Wrench

014308455
66-022: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8451
Screwdriver Bit

014308451
41-2406: RNCC: 3 | RNVC: 2
41-2406: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8454
Combination Box And Open End Wrench

014308454
66-414: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8452
Screwdriver Bit

014308452
42-2045C: RNCC: 3 | RNVC: 2
42-2045C: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8441
Combination Box And Open End Wrench

014308441
66-020: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8444
Screwdriver Bit

014308444
41-2403: RNCC: 3 | RNVC: 2
41-2403: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8449
Combination Box And Open End Wrench

014308449
66-413: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8445
Combination Box And Open End Wrench

014308445
66-028: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8443
Screwdriver Bit

014308443
41-2405: RNCC: 3 | RNVC: 2
41-2405: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8436
Screwdriver Bit

014308436
41-2410: RNCC: 3 | RNVC: 2
41-2410: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8438
Screwdriver Bit

014308438
41-2402: RNCC: 3 | RNVC: 2
41-2402: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8422
Combination Pry And Scraper Bar

014308422
25675: RNCC: 3 | RNVC: 2
25675: RNCC: 3 | RNVC: 9
25675: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8425
Spanner Wrench

014308425
21750: RNCC: 3 | RNVC: 2
21750: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8431
Open End Wrench

014308431
66-311: RNCC: 3 | RNVC: 2
66-311: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8435
Screwdriver Bit

014308435
41-2314: RNCC: 3 | RNVC: 2
41-2314: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8399
Box Wrench

014308399
22215B: RNCC: 3 | RNVC: 2
22215B: RNCC: 3 | RNVC: 9
22215B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8426
Screwdriver Bit

014308426
41-2310: RNCC: 3 | RNVC: 2
41-2310: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8429
Screwdriver Bit

014308429
41-2312: RNCC: 3 | RNVC: 2
41-2312: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8407
Box Wrench Set

014308407
29302: RNCC: 3 | RNVC: 2
29302: RNCC: 3 | RNVC: 9
29302: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8414
Box Wrench

014308414
22217B: RNCC: 3 | RNVC: 2
22217B: RNCC: 3 | RNVC: 9
22217B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8408
Open End Wrench

014308408
66-305: RNCC: 3 | RNVC: 2
66-305: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8416
Open End Wrench

014308416
66-308: RNCC: 3 | RNVC: 2
66-308: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8406
Open End Wrench

014308406
66-122: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8415
Open End Wrench

014308415
66-306: RNCC: 3 | RNVC: 2
66-306: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8400
Wrecking Bar

014308400
25674: RNCC: 3 | RNVC: 2
25674: RNCC: 3 | RNVC: 9
25674: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8420
Open End Wrench

014308420
66-310: RNCC: 3 | RNVC: 2
66-310: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8413
Open End Wrench

014308413
66-309: RNCC: 3 | RNVC: 2
66-309: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8404
Box Wrench

014308404
22213B: RNCC: 3 | RNVC: 2
22213B: RNCC: 3 | RNVC: 9
22213B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8392
Combination Box And Open End Wrench

014308392
20481: RNCC: 3 | RNVC: 2
20481: RNCC: 3 | RNVC: 9
20481: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8393
Box Wrench

014308393
22211B: RNCC: 3 | RNVC: 2
22211B: RNCC: 3 | RNVC: 9
22211B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8403
Box Wrench

014308403
22214B: RNCC: 3 | RNVC: 2
22214B: RNCC: 3 | RNVC: 9
22214B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8390
Wrecking Bar

014308390
25673: RNCC: 3 | RNVC: 2
25673: RNCC: 3 | RNVC: 9
25673: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8396
Wrecking Bar

014308396
25672: RNCC: 3 | RNVC: 2
25672: RNCC: 3 | RNVC: 9
25672: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8391
Box Wrench

014308391
22212B: RNCC: 3 | RNVC: 2
22212B: RNCC: 3 | RNVC: 9
22212B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8389
Pry Bar

014308389
25671: RNCC: 3 | RNVC: 2
25671: RNCC: 3 | RNVC: 9
25671: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8388
Pry Bar

014308388
B107.60: RNCC: 3 | RNVC: 1
B107.60 TY1: RNCC: 5 | RNVC: 1
B107.60 TY1: RNCC: 5 | RNVC: 1
25670: RNCC: 5 | RNVC: 2
25670: RNCC: 5 | RNVC: 9
25670: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8387
Open End Wrench

014308387
66-115: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8385
Box Wrench

014308385
22210B: RNCC: 3 | RNVC: 2
22210B: RNCC: 3 | RNVC: 9
22210B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8382
Pinch Bar

014308382
25668: RNCC: 3 | RNVC: 2
25668: RNCC: 3 | RNVC: 9
25668: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8384
Socket Wrench Set

014308384
91-309: RNCC: 3 | RNVC: 2
91-309: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8386
Open End Wrench

014308386
66-114: RNCC: 3 | RNVC: 2
322WR179: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8381
Socket Wrench Set

014308381
91-315: RNCC: 3 | RNVC: 2
91-315: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8383
Combination Box And Open End Wrench

014308383
20480: RNCC: 3 | RNVC: 2
20480: RNCC: 3 | RNVC: 9
20480: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8378
Combination Box And Open End Wrench

014308378
20478: RNCC: 3 | RNVC: 2
20478: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8380
Pinch Bar

014308380
25669: RNCC: 3 | RNVC: 2
25669: RNCC: 3 | RNVC: 9
25669: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8377
Socket Wrench Socket Set

014308377
91-300: RNCC: 3 | RNVC: 2
91-300: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8376
Pinch Bar

014308376
25667: RNCC: 3 | RNVC: 2
25667: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8375
Socket Wrench Socket Set

014308375
91-320: RNCC: 3 | RNVC: 2
91-320: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8374
Socket Wrench Socket Set

014308374
91-319: RNCC: 3 | RNVC: 2
91-319: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8373
Combination Box And Open End Wrench

014308373
20477: RNCC: 3 | RNVC: 2
20477: RNCC: 3 | RNVC: 9
20477: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8365
Combination Box And Open End Wrench

014308365
20475: RNCC: 3 | RNVC: 2
20475: RNCC: 3 | RNVC: 9
20475: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8339
General Mechanic's Tool Kit

014308339
19111: RNCC: 3 | RNVC: 2
19111: RNCC: 3 | RNVC: 9
19111: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8353
Socket Wrench Socket Set

014308353
91-268: RNCC: 3 | RNVC: 2
91-268: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8352
Combination Box And Open End Wrench

014308352
20330B: RNCC: 3 | RNVC: 2
20330B: RNCC: 3 | RNVC: 9
20330B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8351
Slip Joint Pliers

014308351
25310: RNCC: 3 | RNVC: 2
25310: RNCC: 3 | RNVC: 9
25310: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8342
Combination Box And Open End Wrench

014308342
20314B: RNCC: 3 | RNVC: 2
20314B: RNCC: 3 | RNVC: 9
20314B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8359
Socket Wrench Socket Set

014308359
91-265C: RNCC: 3 | RNVC: 2
91-265C: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8357
Combination Box And Open End Wrench

014308357
20471: RNCC: 3 | RNVC: 2
20471: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8371
Rubber Mallet

014308371
25715: RNCC: 3 | RNVC: 2
25715: RNCC: 3 | RNVC: 9
25715: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8356
Combination Box And Open End Wrench

014308356
20470: RNCC: 3 | RNVC: 2
20470: RNCC: 3 | RNVC: 9
20470: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8369
Combination Box And Open End Wrench

014308369
20476: RNCC: 3 | RNVC: 2
20476: RNCC: 3 | RNVC: 9
20476: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8367
Socket Wrench Socket Set

014308367
91-329: RNCC: 3 | RNVC: 2
91-329: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8368
Socket Wrench Socket Set

014308368
91-325C: RNCC: 3 | RNVC: 2
91-325C: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8363
Combination Box And Open End Wrench

014308363
20473: RNCC: 3 | RNVC: 2
20473: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8364
Socket Wrench Socket Set

014308364
91-295: RNCC: 3 | RNVC: 2
91-295: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8366
Socket Wrench Set

014308366
91-225: RNCC: 3 | RNVC: 2
91-225: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8362
Hand Hammer

014308362
25716: RNCC: 3 | RNVC: 2
25716: RNCC: 3 | RNVC: 9
25716: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8361
Combination Box And Open End Wrench

014308361
20474: RNCC: 3 | RNVC: 2
20474: RNCC: 3 | RNVC: 9
20474: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8349
Socket Wrench Set

014308349
91-267: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8343
Combination Box And Open End Wrench

014308343
20310B: RNCC: 3 | RNVC: 2
20310B: RNCC: 3 | RNVC: 9
20310B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8355
Socket Wrench Socket Set

014308355
91-261C: RNCC: 3 | RNVC: 2
91-261C: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8345
Socket Wrench Set

014308345
91-172: RNCC: 3 | RNVC: 2
91-172: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8341
Nutdriver Set

014308341
56169: RNCC: 3 | RNVC: 2
56169: RNCC: 3 | RNVC: 9
56169: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8348
Combination Box And Open End Wrench

014308348
20315B: RNCC: 3 | RNVC: 2
20315B: RNCC: 3 | RNVC: 9
20315B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8340
Screwdriver Handle

014308340
71-1190: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8347
Slip Joint Pliers

014308347
25316: RNCC: 3 | RNVC: 2
25316: RNCC: 3 | RNVC: 9
25316: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8350
Socket Wrench Set

014308350
91-170: RNCC: 3 | RNVC: 2
91-170: RNCC: 3 | RNVC: 9

3 May 1996

5120-01-430-8344
Combination Box And Open End Wrench

014308344
20312B: RNCC: 3 | RNVC: 2
20312B: RNCC: 3 | RNVC: 9
20312B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8334
Combination Box And Open End Wrench

014308334
20311B: RNCC: 3 | RNVC: 2
20311B: RNCC: 3 | RNVC: 9
20311B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8332
Pliers

014308332
25206: RNCC: 3 | RNVC: 2
25206: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8338
Pliers

014308338
25608: RNCC: 3 | RNVC: 2
25608: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8336
General Mechanic's Tool Kit

014308336
19139: RNCC: 3 | RNVC: 2
19139: RNCC: 3 | RNVC: 9
19139: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8337
Combination Box And Open End Wrench

014308337
20313B: RNCC: 3 | RNVC: 2
20313B: RNCC: 3 | RNVC: 9
20313B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8333
Socket Wrench

014308333
57112: RNCC: 3 | RNVC: 2
57112: RNCC: 3 | RNVC: 9
57112: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8321
Combination Box And Open End Wrench

014308321
20224B: RNCC: 3 | RNVC: 2
20224B: RNCC: 3 | RNVC: 9
20224B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8325
Socket Wrench Set

014308325
30820: RNCC: 3 | RNVC: 2
30820: RNCC: 3 | RNVC: 9
30820: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8327
General Mechanic's Tool Kit

014308327
19610: RNCC: 3 | RNVC: 2
19610: RNCC: 3 | RNVC: 9
19610: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8319
General Mechanic's Tool Kit

014308319
19609: RNCC: 3 | RNVC: 2
19609: RNCC: 3 | RNVC: 9
19609: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8329
Nutdriver Set

014308329
30821: RNCC: 3 | RNVC: 2
30821: RNCC: 3 | RNVC: 9
30821: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8328
Combination Box And Open End Wrench

014308328
20309B: RNCC: 3 | RNVC: 2
20309B: RNCC: 3 | RNVC: 9
20309B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8322
Combination Box And Open End Wrench

014308322
B107.100: RNCC: 3 | RNVC: 1
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 1
B107.6: RNCC: 5 | RNVC: 1
B107.6 TY1: RNCC: 5 | RNVC: 1
20308B: RNCC: 5 | RNVC: 2
20308B: RNCC: 5 | RNVC: 9
20308B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8318
Starter Punch

014308318
B107.410: RNCC: 3 | RNVC: 1
B107.48: RNCC: 5 | RNVC: 1
B107.48 TY2CL8: RNCC: 5 | RNVC: 1
B107.48 TY2CL8: RNCC: 5 | RNVC: 1
25637: RNCC: 5 | RNVC: 9
25637: RNCC: 5 | RNVC: 9
25637: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8316
Cross Tip Screwdriver

014308316
30835: RNCC: 3 | RNVC: 2
30835: RNCC: 3 | RNVC: 9
30835: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8302
Combination Box And Open End Wrench

014308302
20222B: RNCC: 3 | RNVC: 2
20222B: RNCC: 3 | RNVC: 9
20222B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8323
Combination Box And Open End Wrench

014308323
20307B: RNCC: 3 | RNVC: 2
20307B: RNCC: 3 | RNVC: 9
20307B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8317
Cross Tip Screwdriver

014308317
30845: RNCC: 3 | RNVC: 2
30845: RNCC: 3 | RNVC: 9
30845: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8311
Cross Tip Screwdriver

014308311
B107.600: RNCC: 3 | RNVC: 1
B107.30 TY1CL1: RNCC: 5 | RNVC: 1
B107.30: RNCC: 5 | RNVC: 1
30837: RNCC: 5 | RNVC: 2
30837: RNCC: 5 | RNVC: 9
30837: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8313
Tapered Punch

014308313
25635: RNCC: 3 | RNVC: 2
25635: RNCC: 3 | RNVC: 9
25635: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8314
General Mechanic's Tool Kit

014308314
19611: RNCC: 3 | RNVC: 2
19611: RNCC: 3 | RNVC: 9
19611: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8315
Combination Box And Open End Wrench

014308315
20226B: RNCC: 3 | RNVC: 2
20226B: RNCC: 3 | RNVC: 9
20226B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8289
Open End Box Wrench

014308289
B107.100: RNCC: 3 | RNVC: 1
21515: RNCC: 3 | RNVC: 2
21515: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8310
Combination Box And Open End Wrench

014308310
20223B: RNCC: 3 | RNVC: 2
20223B: RNCC: 3 | RNVC: 9
20223B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8312
Combination Box And Open End Wrench

014308312
20225B: RNCC: 3 | RNVC: 2
20225B: RNCC: 3 | RNVC: 9
20225B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8308
Tapered Punch

014308308
25633: RNCC: 3 | RNVC: 2
25633: RNCC: 3 | RNVC: 9
25633: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8229
Combination Box And Open End Wrench Set

014308229
29307: RNCC: 3 | RNVC: 2
29307: RNCC: 3 | RNVC: 9
29307: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8309
Starter Punch

014308309
25638: RNCC: 3 | RNVC: 2
25638: RNCC: 3 | RNVC: 9
25638: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8305
Combination Box And Open End Wrench

014308305
20218B: RNCC: 3 | RNVC: 2
20218B: RNCC: 3 | RNVC: 9
20218B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8262
Combination Box And Open End Wrench

014308262
20314: RNCC: 3 | RNVC: 2
20314: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8297
Open End Box Wrench Set

014308297
29202: RNCC: 3 | RNVC: 2
29202: RNCC: 3 | RNVC: 9
29202: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8307
Combination Box And Open End Wrench

014308307
20220B: RNCC: 3 | RNVC: 2
20220B: RNCC: 3 | RNVC: 9
20220B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8303
Open End Box Wrench

014308303
B107.100: RNCC: 3 | RNVC: 1
21519: RNCC: 3 | RNVC: 2
21519: RNCC: 5 | RNVC: 9
21519: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8304
Open End Box Wrench Set

014308304
29203: RNCC: 3 | RNVC: 2
29203: RNCC: 3 | RNVC: 9
29203: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8301
Tapered Punch

014308301
25634: RNCC: 3 | RNVC: 2
25634: RNCC: 3 | RNVC: 9
25634: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8300
Combination Box And Open End Wrench

014308300
20217B: RNCC: 3 | RNVC: 2
20217B: RNCC: 3 | RNVC: 9
20217B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8272
Combination Box And Open End Wrench

014308272
20206B: RNCC: 3 | RNVC: 2
20206B: RNCC: 3 | RNVC: 9
20206B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8288
Combination Box And Open End Wrench

014308288
20213B: RNCC: 3 | RNVC: 2
20213B: RNCC: 3 | RNVC: 9
20213B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8287
Combination Box And Open End Wrench

014308287
20211B: RNCC: 3 | RNVC: 2
20211B: RNCC: 3 | RNVC: 9
20211B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8299
Combination Box And Open End Wrench

014308299
20219B: RNCC: 3 | RNVC: 2
20219B: RNCC: 3 | RNVC: 9
20219B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8294
Open End Box Wrench

014308294
21513: RNCC: 3 | RNVC: 2
21513: RNCC: 3 | RNVC: 9
21513: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8295
Tapered Punch

014308295
25632: RNCC: 3 | RNVC: 2
25632: RNCC: 3 | RNVC: 9
25632: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8298
Drive Pin Punch

014308298
25629: RNCC: 3 | RNVC: 2
25629: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8293
Drift Punch

014308293
25631: RNCC: 3 | RNVC: 2
25631: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8290
Drive Pin Punch

014308290
25628: RNCC: 3 | RNVC: 2
25628: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8291
Combination Box And Open End Wrench

014308291
20216B: RNCC: 3 | RNVC: 2
20216B: RNCC: 3 | RNVC: 9
20216B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8292
Open End Box Wrench

014308292
21516: RNCC: 3 | RNVC: 2
21516: RNCC: 3 | RNVC: 9
21516: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8277
Combination Box And Open End Wrench

014308277
20208B: RNCC: 3 | RNVC: 2
20208B: RNCC: 3 | RNVC: 9
20208B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8276
Combination Box And Open End Wrench

014308276
66018: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8280
Drive Pin Punch

014308280
25627: RNCC: 3 | RNVC: 2
25627: RNCC: 3 | RNVC: 9
25627: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8286
Combination Box And Open End Wrench

014308286
20215B: RNCC: 3 | RNVC: 2
20215B: RNCC: 3 | RNVC: 9
20215B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8264
Combination Box And Open End Wrench

014308264
20316: RNCC: 3 | RNVC: 2
20316: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8283
Open End Box Wrench

3 May 1996

5120-01-430-8230
Socket Head Screw Key

014308230
57138: RNCC: 3 | RNVC: 2
57138: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8279
Combination Box And Open End Wrench

014308279
20210B: RNCC: 3 | RNVC: 2
20210B: RNCC: 3 | RNVC: 9
20210B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8275
Combination Box And Open End Wrench

014308275
66020: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8281
Open End Box Wrench

014308281
B107.100: RNCC: 3 | RNVC: 1
21510: RNCC: 3 | RNVC: 2
21510: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8266
Combination Box And Open End Wrench Set

014308266
29023: RNCC: 3 | RNVC: 2
29023: RNCC: 3 | RNVC: 9
29023: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8269
Combination Box And Open End Wrench

014308269
B107.100: RNCC: 3 | RNVC: 1
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 1
B107.6: RNCC: 5 | RNVC: 1
B107.6 TY1: RNCC: 5 | RNVC: 1
20318: RNCC: 5 | RNVC: 2
20318: RNCC: 5 | RNVC: 9
20318: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8274
Drive Pin Punch

014308274
25624: RNCC: 3 | RNVC: 2
25624: RNCC: 3 | RNVC: 9
25624: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8270
Combination Box And Open End Wrench

014308270
66016: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8271
Combination Box And Open End Wrench

014308271
20209B: RNCC: 3 | RNVC: 2
20209B: RNCC: 3 | RNVC: 9
20209B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8267
Combination Box And Open End Wrench

014308267
66015: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8258
Combination Box And Open End Wrench Set

014308258
29014B: RNCC: 3 | RNVC: 2
29014B: RNCC: 3 | RNVC: 9
29014B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8260
Combination Box And Open End Wrench

014308260
20312: RNCC: 3 | RNVC: 2
20312: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8265
Combination Box And Open End Wrench

014308265
20315: RNCC: 3 | RNVC: 2
20315: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8261
Combination Box And Open End Wrench

014308261
20313: RNCC: 3 | RNVC: 2
20313: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8268
Combination Box And Open End Wrench

014308268
66014: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8263
Combination Box And Open End Wrench

014308263
AS955: RNCC: 3 | RNVC: 1
AS955 TY3CL1STC: RNCC: 5 | RNVC: 1
20317: RNCC: 5 | RNVC: 2
B107.100: RNCC: 5 | RNVC: 9
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 9
20317: RNCC: 5 | RNVC: 9
20317: RNCC: 5 | RNVC: 9
B107.6: RNCC: 5 | RNVC: 9
B107.6 TY1: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8254
Combination Box And Open End Wrench

014308254
20309: RNCC: 3 | RNVC: 2
20309: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8256
Combination Box And Open End Wrench Set

014308256
29306: RNCC: 3 | RNVC: 2
29306: RNCC: 3 | RNVC: 9
29306: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8255
Combination Box And Open End Wrench Set

014308255
B107.100: RNCC: 3 | RNVC: 1
29305: RNCC: 3 | RNVC: 2
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 1
B107.9M: RNCC: 5 | RNVC: 9
B107.9M TY3ST1: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8257
Combination Box And Open End Wrench Set

014308257
29018B: RNCC: 3 | RNVC: 2
29018B: RNCC: 3 | RNVC: 9
29018B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8259
Combination Box And Open End Wrench Set

014308259
29022: RNCC: 3 | RNVC: 2
29022: RNCC: 3 | RNVC: 9
29022: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8253
Combination Box And Open End Wrench

014308253
20310: RNCC: 3 | RNVC: 2
20310: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8239
Fixed Open End Wrench Set

014308239
29100: RNCC: 3 | RNVC: 2
29100: RNCC: 3 | RNVC: 9
29100: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8248
Combination Box And Open End Wrench Set

014308248
29014: RNCC: 3 | RNVC: 2
29014: RNCC: 3 | RNVC: 9
29014: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8243
Combination Box And Open End Wrench Set

014308243
29308: RNCC: 3 | RNVC: 2
29308: RNCC: 3 | RNVC: 9
29308: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8249
Combination Box And Open End Wrench

014308249
20240: RNCC: 3 | RNVC: 1

3 May 1996

5120-01-430-8252
Combination Box And Open End Wrench

014308252
20311: RNCC: 3 | RNVC: 2
20311: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8250
Combination Box And Open End Wrench

014308250
20308: RNCC: 3 | RNVC: 2
20308: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8245
Combination Box And Open End Wrench Set

014308245
29017B: RNCC: 3 | RNVC: 2
29017B: RNCC: 3 | RNVC: 9
29017B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8251
Combination Box And Open End Wrench Set

014308251
29013: RNCC: 3 | RNVC: 2
29013: RNCC: 3 | RNVC: 9
29013: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8246
Combination Box And Open End Wrench

014308246
AS955: RNCC: 3 | RNVC: 1
AS955 TY3CL1STB: RNCC: 5 | RNVC: 1
20307: RNCC: 5 | RNVC: 2
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 9
20307: RNCC: 5 | RNVC: 9
20307: RNCC: 5 | RNVC: 9
B107.6: RNCC: 5 | RNVC: 9
B107.6 TY1: RNCC: 5 | RNVC: 9
B107.100: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8238
Combination Box And Open End Wrench

014308238
20239: RNCC: 3 | RNVC: 2
20239: RNCC: 3 | RNVC: 9
20239: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8247
Combination Box And Open End Wrench Set

014308247
29018: RNCC: 3 | RNVC: 2
29018: RNCC: 3 | RNVC: 9
29018: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8244
Fixed Open End Wrench Set

014308244
29121: RNCC: 3 | RNVC: 2
29121: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8237
Combination Box And Open End Wrench Set

014308237
29304: RNCC: 3 | RNVC: 2
29304: RNCC: 3 | RNVC: 9
29304: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8235
Combination Box And Open End Wrench Set

014308235
B107.100: RNCC: 3 | RNVC: 1
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 1
B107.6: RNCC: 5 | RNVC: 1
B107.6 TY1: RNCC: 5 | RNVC: 1
29011B: RNCC: 5 | RNVC: 2
29011B: RNCC: 5 | RNVC: 9
29011B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8236
Open End Wrench

014308236
21022B: RNCC: 3 | RNVC: 2
21022B: RNCC: 3 | RNVC: 9
21022B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8228
Open End Wrench

014308228
21014B: RNCC: 3 | RNVC: 2
21014B: RNCC: 3 | RNVC: 9
21014B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8231
Socket Head Screw Key

014308231
57143: RNCC: 3 | RNVC: 2
57143: RNCC: 3 | RNVC: 9
57143: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8227
Fixed Open End Wrench Set

014308227
29103: RNCC: 3 | RNVC: 2
29103: RNCC: 3 | RNVC: 9
29103: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8234
Socket Head Screw Key

014308234
57142: RNCC: 3 | RNVC: 2
57142: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8233
Combination Box And Open End Wrench

014308233
20204: RNCC: 3 | RNVC: 2
20204: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8222
Combination Box And Open End Wrench Set

014308222
29016: RNCC: 3 | RNVC: 2
29016: RNCC: 3 | RNVC: 9
29016: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8226
Combination Box And Open End Wrench Set

014308226
B107.100: RNCC: 3 | RNVC: 1
B107.6 TY1: RNCC: 5 | RNVC: 1
B107.6: RNCC: 5 | RNVC: 1
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 1
29010: RNCC: 5 | RNVC: 2
29010: RNCC: 5 | RNVC: 9
29010: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8221
Open End Wrench

014308221
21017B: RNCC: 3 | RNVC: 2
21017B: RNCC: 3 | RNVC: 9
21017B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8225
Fixed Open End Wrench Set

3 May 1996

5120-01-430-8223
Open End Wrench

014308223
21012B: RNCC: 3 | RNVC: 2
21012B: RNCC: 3 | RNVC: 9
21012B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8219
Open End Wrench

014308219
21008B: RNCC: 3 | RNVC: 2
21008B: RNCC: 3 | RNVC: 9
21008B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8216
Combination Box And Open End Wrench Set

014308216
29020: RNCC: 3 | RNVC: 2
29020: RNCC: 3 | RNVC: 9
29020: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8220
Combination Box And Open End Wrench

014308220
20204B: RNCC: 3 | RNVC: 2
20204B: RNCC: 3 | RNVC: 9
20204B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8218
Combination Box And Open End Wrench Set

014308218
29303: RNCC: 3 | RNVC: 2
29303: RNCC: 3 | RNVC: 9
29303: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8212
Open End Wrench

014308212
21118: RNCC: 3 | RNVC: 2
21118: RNCC: 3 | RNVC: 9
21118: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8215
Open End Wrench

014308215
21121: RNCC: 3 | RNVC: 2
21121: RNCC: 3 | RNVC: 9
21121: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8217
Fixed Open End Wrench Set

014308217
29104: RNCC: 3 | RNVC: 2
29104: RNCC: 3 | RNVC: 9
29104: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8214
Open End Wrench

014308214
21010B: RNCC: 3 | RNVC: 2
21010B: RNCC: 3 | RNVC: 9
21010B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8209
Open End Wrench

014308209
21004B: RNCC: 3 | RNVC: 2
21004B: RNCC: 3 | RNVC: 9
21004B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8207
Combination Box And Open End Wrench Set

014308207
29010B: RNCC: 3 | RNVC: 2
29010B: RNCC: 3 | RNVC: 9
29010B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8210
Open End Wrench

014308210
21019B: RNCC: 3 | RNVC: 2
21019B: RNCC: 3 | RNVC: 9
21019B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8203
Combination Box And Open End Wrench

014308203
20329: RNCC: 3 | RNVC: 2
20329: RNCC: 3 | RNVC: 9
20329: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8205
Open End Wrench

014308205
21013B: RNCC: 3 | RNVC: 2
21013B: RNCC: 3 | RNVC: 9
21013B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8206
Open End Wrench

014308206
21116: RNCC: 3 | RNVC: 2
21116: RNCC: 3 | RNVC: 9
21116: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8208
Hand Hammer

014308208
25712: RNCC: 3 | RNVC: 2
25712: RNCC: 3 | RNVC: 9
25712: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8202
Combination Box And Open End Wrench

014308202
B107.100: RNCC: 3 | RNVC: 1
B107.6: RNCC: 5 | RNVC: 1
B107.6 TY1: RNCC: 5 | RNVC: 1
20322: RNCC: 5 | RNVC: 9
20322: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8201
Open End Wrench

014308201
21120: RNCC: 3 | RNVC: 2
21120: RNCC: 3 | RNVC: 9
21120: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8196
Hand Hammer

014308196
25713: RNCC: 3 | RNVC: 2
25713: RNCC: 3 | RNVC: 9
25713: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8204
Combination Box And Open End Wrench

014308204
20324: RNCC: 3 | RNVC: 2
20324: RNCC: 3 | RNVC: 9
20324: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8170
Nutdriver

014308170
30808: RNCC: 3 | RNVC: 2
30808: RNCC: 3 | RNVC: 9
30808: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8199
Hand Hammer

014308199
25706: RNCC: 3 | RNVC: 2
25706: RNCC: 3 | RNVC: 9
25706: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8200
Combination Box And Open End Wrench

014308200
20330: RNCC: 3 | RNVC: 2
20330: RNCC: 3 | RNVC: 9
20330: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8144
Hand Hammer

014308144
25702: RNCC: 3 | RNVC: 2
25702: RNCC: 3 | RNVC: 9
25702: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8137
Nutdriver

014308137
30809: RNCC: 3 | RNVC: 2
30809: RNCC: 3 | RNVC: 9
30809: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8181
Hand Hammer

014308181
25709: RNCC: 3 | RNVC: 2
25709: RNCC: 3 | RNVC: 9
25709: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8150
Combination Box And Open End Wrench

014308150
20235: RNCC: 3 | RNVC: 2
20235: RNCC: 3 | RNVC: 9
20235: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8198
Combination Box And Open End Wrench

014308198
20327: RNCC: 3 | RNVC: 2
20327: RNCC: 3 | RNVC: 9
20327: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8197
Combination Box And Open End Wrench

014308197
20328: RNCC: 3 | RNVC: 2
20328: RNCC: 3 | RNVC: 9
20328: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8127
Socket Wrench

014308127
57104: RNCC: 3 | RNVC: 2
57104: RNCC: 3 | RNVC: 9
57104: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8194
Combination Box And Open End Wrench

014308194
20326: RNCC: 3 | RNVC: 2
20326: RNCC: 3 | RNVC: 9
20326: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8189
Combination Box And Open End Wrench

014308189
20325: RNCC: 3 | RNVC: 2
20325: RNCC: 3 | RNVC: 9
20325: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8193
Combination Box And Open End Wrench

014308193
B107.100: RNCC: 3 | RNVC: 1
B107.100 COMBINATION TY1: RNCC: 5 | RNVC: 1
B107.6: RNCC: 5 | RNVC: 1
B107.6 TY1: RNCC: 5 | RNVC: 1
20319: RNCC: 5 | RNVC: 2
20319: RNCC: 5 | RNVC: 9
20319: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8188
Hand Hammer

014308188
25711: RNCC: 3 | RNVC: 2
25711: RNCC: 3 | RNVC: 9
25711: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8190
Combination Box And Open End Wrench

014308190
20237: RNCC: 3 | RNVC: 2
20237: RNCC: 3 | RNVC: 9
20237: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8186
Hand Hammer

014308186
25710: RNCC: 3 | RNVC: 2
25710: RNCC: 3 | RNVC: 9
25710: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8192
Open End Wrench

014308192
21117: RNCC: 3 | RNVC: 2
21117: RNCC: 3 | RNVC: 9
21117: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8183
Combination Box And Open End Wrench

014308183
20323: RNCC: 3 | RNVC: 2
20323: RNCC: 3 | RNVC: 9
20323: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8184
Open End Wrench

014308184
21113: RNCC: 3 | RNVC: 2
21113: RNCC: 3 | RNVC: 9
21113: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8182
Hand Hammer

014308182
25708: RNCC: 3 | RNVC: 2
25708: RNCC: 3 | RNVC: 9
25708: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8174
Hand Hammer

014308174
25707: RNCC: 3 | RNVC: 2
25707: RNCC: 3 | RNVC: 9
25707: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8177
Combination Box And Open End Wrench

014308177
20321: RNCC: 3 | RNVC: 2
20321: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8179
Open End Wrench

014308179
21112: RNCC: 3 | RNVC: 2
21112: RNCC: 3 | RNVC: 9
21112: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8175
Open End Wrench

014308175
21107: RNCC: 3 | RNVC: 2
21107: RNCC: 3 | RNVC: 9
21107: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8180
Hand Hammer

014308180
25701: RNCC: 3 | RNVC: 2
25701: RNCC: 3 | RNVC: 9
25701: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8171
Combination Box And Open End Wrench

014308171
20320: RNCC: 3 | RNVC: 2
20320: RNCC: 3 | RNVC: 9
20320: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8178
Open End Wrench

014308178
21110: RNCC: 3 | RNVC: 2
21110: RNCC: 3 | RNVC: 9
21110: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8161
Combination Box And Open End Wrench

014308161
20238: RNCC: 3 | RNVC: 2
20238: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8163
Combination Box And Open End Wrench

014308163
20232: RNCC: 3 | RNVC: 2
20232: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8160
Hand Hammer

014308160
25700: RNCC: 3 | RNVC: 2
25700: RNCC: 3 | RNVC: 9
25700: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8165
Hand Hammer

014308165
25703: RNCC: 3 | RNVC: 2
25703: RNCC: 3 | RNVC: 9
25703: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8164
Hand Hammer

014308164
25705: RNCC: 3 | RNVC: 2
25705: RNCC: 3 | RNVC: 9
25705: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8153
Flat Tip Screwdriver

014308153
30844: RNCC: 3 | RNVC: 2
30844: RNCC: 3 | RNVC: 9
30844: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8136
Socket Wrench Screwdriver Attachment

014308136
58676: RNCC: 3 | RNVC: 2
58676: RNCC: 3 | RNVC: 9
58676: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8148
Socket Wrench Screwdriver Attachment

014308148
58686: RNCC: 3 | RNVC: 2
58686: RNCC: 3 | RNVC: 9
58686: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8159
Nutdriver

014308159
30804: RNCC: 3 | RNVC: 2
30804: RNCC: 3 | RNVC: 9
30804: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8102
Spanner Wrench

014308102
21763: RNCC: 3 | RNVC: 2
21763: RNCC: 3 | RNVC: 9
21763: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8152
Socket Wrench

014308152
57106: RNCC: 3 | RNVC: 2
57106: RNCC: 3 | RNVC: 9
57106: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8101
Socket Wrench Screwdriver Attachment

014308101
58672: RNCC: 3 | RNVC: 2
58672: RNCC: 3 | RNVC: 9
58672: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8158
Combination Box And Open End Wrench

014308158
20225: RNCC: 3 | RNVC: 2
20225: RNCC: 3 | RNVC: 9
20225: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8151
Socket Wrench

014308151
30807: RNCC: 3 | RNVC: 2
30807: RNCC: 3 | RNVC: 9
30807: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8145
Flat Tip Screwdriver

014308145
30841: RNCC: 3 | RNVC: 2
30841: RNCC: 3 | RNVC: 9
30841: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8143
Flat Tip Screwdriver

014308143
30834: RNCC: 3 | RNVC: 2
30834: RNCC: 3 | RNVC: 9
30834: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8132
Nutdriver

014308132
30860: RNCC: 3 | RNVC: 2
30860: RNCC: 3 | RNVC: 9
30860: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8142
Combination Box And Open End Wrench

014308142
20226: RNCC: 3 | RNVC: 2
20226: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8141
Socket Wrench

014308141
57100: RNCC: 3 | RNVC: 2
57100: RNCC: 3 | RNVC: 9
57100: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8135
Flat Tip Screwdriver

014308135
B107.600: RNCC: 3 | RNVC: 1
B107.15: RNCC: 5 | RNVC: 1
B107.15 TY2: RNCC: 5 | RNVC: 1
30843: RNCC: 5 | RNVC: 2
30843: RNCC: 5 | RNVC: 9
30843: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8133
Nutdriver

014308133
57108: RNCC: 3 | RNVC: 2
57108: RNCC: 3 | RNVC: 9
57108: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8128
Socket Wrench Screwdriver Attachment

014308128
58684: RNCC: 3 | RNVC: 2
58684: RNCC: 3 | RNVC: 9
58684: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8140
Combination Box And Open End Wrench

014308140
20231: RNCC: 3 | RNVC: 2
20231: RNCC: 3 | RNVC: 9
20231: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8131
Combination Box And Open End Wrench

014308131
20229: RNCC: 3 | RNVC: 2
20229: RNCC: 3 | RNVC: 9
20229: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8122
Flat Tip Screwdriver

014308122
30840: RNCC: 3 | RNVC: 2
30840: RNCC: 3 | RNVC: 9
30840: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8126
Socket Wrench Screwdriver Attachment

014308126
58814: RNCC: 3 | RNVC: 2
58814: RNCC: 3 | RNVC: 9
58814: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8130
Combination Box And Open End Wrench

014308130
20224: RNCC: 3 | RNVC: 2
20224: RNCC: 3 | RNVC: 9
20224: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8112
Socket Wrench Socket

014308112
13203: RNCC: 3 | RNVC: 2
13203: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8125
Nutdriver

014308125
30802: RNCC: 3 | RNVC: 2
30802: RNCC: 3 | RNVC: 9
30802: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8124
Driver Nut

014308124
30806: RNCC: 3 | RNVC: 2
75048140: RNCC: 5 | RNVC: 2
30806: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8119
Socket Wrench Screwdriver Attachment

014308119
58810: RNCC: 3 | RNVC: 2
58810: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8123
Combination Box And Open End Wrench

014308123
66420: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8114
Socket Wrench Screwdriver Attachment

014308114
58918: RNCC: 3 | RNVC: 2
58918: RNCC: 3 | RNVC: 9
58918: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8111
Combination Box And Open End Wrench

014308111
66408: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8113
Flat Tip Screwdriver

014308113
30842: RNCC: 3 | RNVC: 2
30842: RNCC: 3 | RNVC: 9
30842: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8117
Flat Tip Screwdriver

014308117
30833: RNCC: 3 | RNVC: 2
30833: RNCC: 3 | RNVC: 9
30833: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8121
Nutdriver

014308121
30854: RNCC: 3 | RNVC: 2
30854: RNCC: 3 | RNVC: 9
30854: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8116
Nutdriver

014308116
30861: RNCC: 3 | RNVC: 2
30861: RNCC: 3 | RNVC: 9
30861: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8105
Socket Wrench Screwdriver Attachment

014308105
58682: RNCC: 3 | RNVC: 2
58682: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8106
Socket Wrench Screwdriver Attachment

014308106
58674: RNCC: 3 | RNVC: 2
58674: RNCC: 3 | RNVC: 9
58674: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8104
Flat Tip Screwdriver

014308104
B107.600: RNCC: 3 | RNVC: 1
B107.15 TY2: RNCC: 5 | RNVC: 1
B107.15: RNCC: 5 | RNVC: 1
30839: RNCC: 5 | RNVC: 2
30839: RNCC: 5 | RNVC: 9
30839: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8097
Nutdriver

014308097
30859: RNCC: 3 | RNVC: 2
30859: RNCC: 3 | RNVC: 9
30859: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8103
Socket Wrench Socket Set

014308103
19216: RNCC: 3 | RNVC: 2
19216: RNCC: 3 | RNVC: 9
19216: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8094
Combination Box And Open End Wrench

014308094
66010: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8085
Nutdriver

014308085
30810: RNCC: 3 | RNVC: 2
30810: RNCC: 3 | RNVC: 9
30810: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8095
Combination Box And Open End Wrench

014308095
66012: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8092
Socket Wrench

014308092
30856: RNCC: 3 | RNVC: 2
30856: RNCC: 3 | RNVC: 9
30856: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8093
Combination Box And Open End Wrench

014308093
66022: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8099
Nutdriver

014308099
30858: RNCC: 3 | RNVC: 2
30858: RNCC: 3 | RNVC: 9
30858: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8098
Spanner Wrench

014308098
21761: RNCC: 3 | RNVC: 2
21761: RNCC: 3 | RNVC: 9
21761: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8091
Socket Wrench Set

014308091
19220: RNCC: 3 | RNVC: 2
19220: RNCC: 3 | RNVC: 9
19220: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8089
Spanner Wrench

014308089
21758: RNCC: 3 | RNVC: 2
21758: RNCC: 3 | RNVC: 9
21758: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8087
Combination Box And Open End Wrench

014308087
66416: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8083
Socket Wrench Set

014308083
19221: RNCC: 3 | RNVC: 2
19221: RNCC: 3 | RNVC: 9
19221: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8079
Open End Box Wrench

014308079
21412: RNCC: 3 | RNVC: 2
21412: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8081
Socket Wrench Screwdriver Attachment

014308081
58812: RNCC: 3 | RNVC: 2
58812: RNCC: 3 | RNVC: 9
58812: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8082
Combination Box And Open End Wrench

014308082
66422: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8088
Socket Wrench

014308088
30857: RNCC: 3 | RNVC: 2
30857: RNCC: 3 | RNVC: 9
30857: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8080
Socket Wrench Screwdriver Attachment

014308080
58906: RNCC: 3 | RNVC: 2
58906: RNCC: 3 | RNVC: 9
58906: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8076
Combination Box And Open End Wrench

014308076
66412: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8078
Socket Wrench Socket

014308078
13202: RNCC: 3 | RNVC: 2
13202: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8075
Combination Box And Open End Wrench

014308075
66418: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8084
Socket Wrench Screwdriver Attachment

014308084
58808: RNCC: 3 | RNVC: 2
58808: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8070
Open End Box Wrench

014308070
B107.100: RNCC: 3 | RNVC: 1
B107.100 FLARE NUT TY1: RNCC: 5 | RNVC: 1
B107.40: RNCC: 5 | RNVC: 1
B107.40 TY1: RNCC: 5 | RNVC: 1
21414: RNCC: 5 | RNVC: 2
21414: RNCC: 5 | RNVC: 9
21414: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8086
Socket Wrench Screwdriver Attachment

014308086
58912: RNCC: 3 | RNVC: 2
58912: RNCC: 3 | RNVC: 9
58912: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8071
Combination Box And Open End Wrench

014308071
20430: RNCC: 3 | RNVC: 2
20430: RNCC: 3 | RNVC: 9
20430: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8064
Combination Box And Open End Wrench

014308064
66413: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8062
Spanner Wrench

014308062
21762: RNCC: 3 | RNVC: 2
21762: RNCC: 3 | RNVC: 9
21762: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8073
Open End Box Wrench

014308073
21404: RNCC: 3 | RNVC: 2
21404: RNCC: 3 | RNVC: 9
21404: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8074
Socket Wrench Set

014308074
19211: RNCC: 3 | RNVC: 2
19211: RNCC: 3 | RNVC: 9
19211: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8072
Combination Box And Open End Wrench

014308072
66028: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8066
Socket Wrench Screwdriver Attachment

014308066
58900: RNCC: 3 | RNVC: 2
58900: RNCC: 3 | RNVC: 9
58900: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8067
Combination Box And Open End Wrench

014308067
66414: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8061
Socket Wrench Screwdriver Attachment

014308061
58800: RNCC: 3 | RNVC: 2
58800: RNCC: 3 | RNVC: 9
58800: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8053
Combination Box And Open End Wrench

014308053
66411: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8058
Open End Box Wrench

014308058
21410: RNCC: 3 | RNVC: 2
21410: RNCC: 3 | RNVC: 9
21410: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8054
Box Wrench

014308054
22215: RNCC: 3 | RNVC: 2
22215: RNCC: 3 | RNVC: 9
22215: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8045
Socket Wrench Socket

014308045
12264: RNCC: 3 | RNVC: 2
12264: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8051
Socket Wrench Socket

014308051
12267: RNCC: 3 | RNVC: 2
12267: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8055
Combination Box And Open End Wrench

014308055
20427: RNCC: 3 | RNVC: 2
20427: RNCC: 3 | RNVC: 9
20427: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8059
Spanner Wrench

014308059
21760: RNCC: 3 | RNVC: 2
21760: RNCC: 3 | RNVC: 9
21760: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8049
Socket Wrench Handle

014308049
B107.10: RNCC: 3 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
12806: RNCC: 5 | RNVC: 2
12806: RNCC: 5 | RNVC: 9
12806: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8052
Socket Wrench Screwdriver Attachment

014308052
58806: RNCC: 3 | RNVC: 2
58806: RNCC: 3 | RNVC: 9
58806: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8063
Socket Wrench Set

014308063
19300: RNCC: 3 | RNVC: 2
19300: RNCC: 3 | RNVC: 9
19300: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8056
Box Wrench

014308056
22208B: RNCC: 3 | RNVC: 2
22208B: RNCC: 3 | RNVC: 9
22208B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8057
Socket Wrench Socket Set

014308057
19214: RNCC: 3 | RNVC: 2
19214: RNCC: 3 | RNVC: 9
19214: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8060
Socket Wrench Handle

014308060
ASME-B107.10M: RNCC: 3 | RNVC: 1
12821: RNCC: 3 | RNVC: 2
ASME-B107.10M TY1CL1: RNCC: 5 | RNVC: 1
12821: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8040
Combination Box And Open End Wrench

014308040
20436: RNCC: 3 | RNVC: 2
20436: RNCC: 3 | RNVC: 9
20436: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8047
Spanner Wrench

014308047
21759: RNCC: 3 | RNVC: 2
21759: RNCC: 3 | RNVC: 9
21759: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8044
Socket Wrench Screwdriver Attachment

014308044
58802: RNCC: 3 | RNVC: 2
58802: RNCC: 3 | RNVC: 9
58802: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8041
Combination Box And Open End Wrench

014308041
20433: RNCC: 3 | RNVC: 2
20433: RNCC: 3 | RNVC: 9
20433: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8046
Combination Box And Open End Wrench

014308046
20435: RNCC: 3 | RNVC: 2
20435: RNCC: 3 | RNVC: 9
20435: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8050
Socket Wrench Screwdriver Attachment

014308050
58915: RNCC: 3 | RNVC: 2
58915: RNCC: 3 | RNVC: 9
58915: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8048
Combination Box And Open End Wrench

014308048
66024: RNCC: 3 | RNVC: 2

3 May 1996

5120-01-430-8043
Socket Wrench Handle

014308043
B107.10: RNCC: 3 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
12801B: RNCC: 5 | RNVC: 2
12801B: RNCC: 5 | RNVC: 9
12801B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8042
Spanner Wrench

014308042
21757: RNCC: 3 | RNVC: 2
21757: RNCC: 3 | RNVC: 9
21757: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8036
Combination Box And Open End Wrench

014308036
20422: RNCC: 3 | RNVC: 2
20422: RNCC: 3 | RNVC: 9
20422: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8039
Socket Wrench Set

014308039
19212: RNCC: 3 | RNVC: 2
19212: RNCC: 3 | RNVC: 9
19212: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8031
Socket Wrench Handle

014308031
B107.10: RNCC: 3 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
B107.10 TY1CL2: RNCC: 5 | RNVC: 1
12800: RNCC: 5 | RNVC: 2
12800: RNCC: 5 | RNVC: 9
12800: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8028
Socket Wrench Screwdriver Attachment

014308028
58903: RNCC: 3 | RNVC: 2
58903: RNCC: 3 | RNVC: 9
58903: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8033
Combination Box And Open End Wrench

014308033
20431: RNCC: 3 | RNVC: 2
20431: RNCC: 3 | RNVC: 9
20431: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8032
Socket Wrench Set

014308032
19218: RNCC: 3 | RNVC: 2
19218: RNCC: 3 | RNVC: 9
19218: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8034
Socket Wrench Socket

014308034
12261: RNCC: 3 | RNVC: 2
12261: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8026
Box Wrench

014308026
AS954: RNCC: 3 | RNVC: 1
AS954 TY2CL1STA: RNCC: 5 | RNVC: 1
22208: RNCC: 5 | RNVC: 2
AS954: RNCC: 5 | RNVC: 9
22208: RNCC: 5 | RNVC: 9
22208: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8038
Socket Wrench Screwdriver Attachment

014308038
58909: RNCC: 3 | RNVC: 2
58909: RNCC: 3 | RNVC: 9
58909: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8035
Combination Box And Open End Wrench

014308035
20434: RNCC: 3 | RNVC: 2
20434: RNCC: 3 | RNVC: 9
20434: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8014
Box Wrench

014308014
22204B: RNCC: 3 | RNVC: 2
22204B: RNCC: 3 | RNVC: 9
22204B: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8027
Combination Box And Open End Wrench

014308027
20432: RNCC: 3 | RNVC: 2
20432: RNCC: 3 | RNVC: 9
20432: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8023
Combination Box And Open End Wrench

014308023
20429: RNCC: 3 | RNVC: 2
20429: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8030
Combination Box And Open End Wrench

014308030
20419: RNCC: 3 | RNVC: 2
20419: RNCC: 3 | RNVC: 9
20419: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8019
Socket Wrench Set

014308019
19301: RNCC: 3 | RNVC: 2
19301: RNCC: 3 | RNVC: 9
19301: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8024
Socket Wrench Socket

014308024
12270: RNCC: 3 | RNVC: 2
12270: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8025
Spanner Wrench

014308025
21756: RNCC: 3 | RNVC: 2
21756: RNCC: 3 | RNVC: 9
21756: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8029
Spanner Wrench

014308029
21755: RNCC: 3 | RNVC: 2
21755: RNCC: 3 | RNVC: 9
21755: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8021
Socket Wrench Socket

014308021
12069: RNCC: 3 | RNVC: 2
12069: RNCC: 3 | RNVC: 9
12069: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8013
Combination Box And Open End Wrench

014308013
20428: RNCC: 3 | RNVC: 2
20428: RNCC: 3 | RNVC: 9
20428: RNCC: 5 | RNVC: 9

3 May 1996

5120-01-430-8012
Combination Box And Open End Wrench

014308012
20327B: RNCC: 3 | RNVC: 2
20327B: RNCC: 3 | RNVC: 9
20327B: RNCC: 5 | RNVC: 9

3 May 1996

Load More Results