What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 98 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 98 of 108

5120-99-607-1818

5120-99-559-5103

5120-99-166-5546
Sleeve Holding Tool

991665546
SAM20118: RNCC: 3 | RNVC: 2
SAM.20118: RNCC: 6 | RNVC: 9

4 Mar 2002

5120-99-977-2609
Box Wrench

999772609
RBM1011S: RNCC: 3 | RNVC: 2
RBM1011S: RNCC: 5 | RNVC: 2
1C/8596: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-730-6922
Termi Crimping Tool

997306922
FT8: RNCC: 3 | RNVC: 2
1M/2082: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-725-7434
Die Assembly

997257434
600497: RNCC: 3 | RNVC: 2
1M/2036: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-977-2619
Box Wrench

999772619
RBM78S: RNCC: 3 | RNVC: 2
RBM78S: RNCC: 5 | RNVC: 2
RBM78S: RNCC: 6 | RNVC: 9
1C/8595: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-490-3696
Vice

994903696
047675D: RNCC: 3 | RNVC: 2
380: RNCC: 5 | RNVC: 2

18 Aug 1999

5120-99-219-2538
Screwdriver Bit Set And Handle

992192538
777/2W: RNCC: 3 | RNVC: 2
777/2W: RNCC: 5 | RNVC: 2
16-667: RNCC: 6 | RNVC: 9
0544T-008: RNCC: 6 | RNVC: 9

18 Feb 1993

5120-99-738-9954
Torque Wrench

997389954
100401-0173-001: RNCC: 3 | RNVC: 2
SL1: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-223-6844
Pyro Ringing Tool

992236844
NO PRIMARY REF 99-223-6844: RNCC: 3 | RNVC: 2
BN1668: RNCC: 5 | RNVC: 2

15 Feb 1993

5120-99-275-5110

5120-99-454-7771

5120-99-418-4846
Stepped Cap

5120-99-454-8952
Watchmakers Palette

5120-99-556-5935

5120-99-638-2961
Hand Scissors Jack

5120-99-202-0125

5120-99-414-1977

5120-99-216-9481
Fixing Shank

992169481
NO PRIMARY REF 99-216-9481: RNCC: 3 | RNVC: 2
63B1051: RNCC: 5 | RNVC: 2

14 Sep 2005

5120-99-838-1885
Bearing And Bushing Remover

998381885
LC105-7A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-918-8203
Socket Head Screw Key

999188203
102103: RNCC: 3 | RNVC: 2
250-030-03-42033: RNCC: 5 | RNVC: 2
1552100: RNCC: 5 | RNVC: 2
6880-2715: RNCC: 5 | RNVC: 2

10 May 2010

5120-99-910-5716
Smiths Rod

999105716
NO PRIMARY REF 99-910-5716: RNCC: 3 | RNVC: 2
H2121: RNCC: 5 | RNVC: 2
1B2120: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-911-1087
Flatpoi Screwdriver

999111087
05656-00654: RNCC: 3 | RNVC: 2

5 Feb 1992

5120-99-910-9236
Stud Remover And Setter

999109236
H5532: RNCC: 2 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-893-0162
Socket Wrench Extension

998930162
NO PRIMARY REF 99-893-0162: RNCC: 3 | RNVC: 2
01151: RNCC: 5 | RNVC: 2

11 Jun 2004

5120-99-564-8387
Torque Wrench Adapter

995648387
FN-3/8 IN.: RNCC: 3 | RNVC: 2
SFN-3/8 IN.: RNCC: 5 | RNVC: 2
T2EP1889: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-146-4916
Tail R Puller Screw

5120-99-746-1983
Bearing S Extractor

5120-99-834-0356
Test Adaptor

998340356
V4575-2: RNCC: 3 | RNVC: 2

14 May 1980

5120-99-828-8985
Socket Wrench

998288985
V3108-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-6464
Bush Inserter

994696464
AE1198: RNCC: 3 | RNVC: 2
27M13478: RNCC: 6 | RNVC: 9
4MA5605: RNCC: 6 | RNVC: 9
4MA5605000: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-0725
Face Spanner Wrench Socket

996660725
MBEU163823: RNCC: 3 | RNVC: 2

10 Dec 2003

5120-99-421-8349
Box Wrench

994218349
UD42855: RNCC: 3 | RNVC: 2
0633-192781: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-2608

5120-99-655-3918
Spanner Wrench

996553918
1951T405: RNCC: 3 | RNVC: 2
2138T000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-736-5494
Torque Wrench

997365494
TSN 25A I: RNCC: 3 | RNVC: 2
011014: RNCC: 5 | RNVC: 2

20 Apr 2005

5120-99-136-9221
Screwdriver Bit

991369221
CRA3A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-601-7696
Socket Wren Socket

996017696
BT-J-126: RNCC: 3 | RNVC: 2

15 Feb 1995

5120-99-559-0077
Wrench Spanner

995590077
5-79-16W: RNCC: 3 | RNVC: 2
H718-226722: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-494-1870
Thre Anchor-Adaptor

994941870
A0/1010/M8X1.00 FINE: RNCC: 3 | RNVC: 2
GSIPTGAMC6AB190406TURNEX: RNCC: 6 | RNVC: 9

7 Jun 2006

5120-99-546-1663

5120-99-757-6614
Torque Wrench Adapter

997576614
012180: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

10 Sep 2008

5120-99-640-0128
Socket Wrench Extension

996400128
CH49901: RNCC: 3 | RNVC: 2
67A125: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-944-2496

5120-99-422-5765

5120-99-453-9427
Spanner Wrench

5120-99-127-6737
Socket Wrench Socket Set

991276737
FA17360: RNCC: 3 | RNVC: 2
7S2868: RNCC: 6 | RNVC: 9
F1FA17360: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-197-6703
Screwdriver

991976703
NO PRIMARY REF 99-197-6703: RNCC: 3 | RNVC: 2
5006/9IN (STANLEY): RNCC: 5 | RNVC: 2
5006/9IN.: RNCC: 5 | RNVC: 9

11 Dec 1995

5120-99-663-6385
Magnetic Pick- Tool

996636385
S3S/20229000: RNCC: 3 | RNVC: 2

28 Feb 1997

5120-99-414-0292

5120-99-418-4873
Holding Fixture

5120-99-607-6302

5120-99-418-6042
Spanner Wrench

5120-99-422-4600

5120-99-570-0722
Oil Seal Protector

5120-99-418-4861
Wrench

5120-99-138-1025
Socket Wrench Socket

991381025
SWM271: RNCC: 3 | RNVC: 2
SWM271 LOCK-ON: RNCC: 5 | RNVC: 2
1L700: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-733-5723
Bit

997335723
TMAM2.5-2: RNCC: 3 | RNVC: 2
1L/789: RNCC: 6 | RNVC: 9
TMAM2.5-2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-460-3910
Torque Spanner

994603910
PE 50118: RNCC: 3 | RNVC: 2
T.77861: RNCC: 5 | RNVC: 2
64DE76: RNCC: 6 | RNVC: 9
64DE76: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-723-1613
Wrench

997231613
BLT10300B: RNCC: 3 | RNVC: 2

30 Oct 1981

5120-99-459-2055

5120-99-712-6941

5120-99-417-5374
Spanner Wrench

5120-99-459-0793
Spanner Wrench

5120-99-434-7185

5120-99-434-7144

5120-99-953-1446

5120-99-457-7661
Calking Gun

5120-99-465-7214
Socket Wrench Crowfoot Attachment

994657214
PE50096: RNCC: 3 | RNVC: 2
T77777: RNCC: 5 | RNVC: 2
64DE22: RNCC: 6 | RNVC: 9
64DE22: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-954-3008
Cont Insertion Tool

999543008
NO PRIMARY REF 99-954-3008: RNCC: 3 | RNVC: 2
558-1-00581: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-9538
Screw Thread Insert Inserter

991229538
A29-13: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
1C7564: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-966-0242
Mechanical Puller

999660242
CM1428A: RNCC: 3 | RNVC: 2
FH70-8-1-8000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-2940
Tommy Bar

997842940
00832/DT/035928 ITEM 2: RNCC: 3 | RNVC: 2
00832/AS/035949 ITEM 2: RNCC: 5 | RNVC: 2
00832/AS/035949/2: RNCC: 5 | RNVC: 2
00832/DT/035928/2: RNCC: 5 | RNVC: 2

26 Aug 2000

5120-99-556-8192
Open End Wrench

995568192
A7270 PART 5: RNCC: 3 | RNVC: 2
A7270-5: RNCC: 5 | RNVC: 2
190-788350: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-968-1677
Screwdriver

999681677
NO PRIMARY REF 99-968-1677: RNCC: 3 | RNVC: 2
CLAY NO 2: RNCC: 5 | RNVC: 2

11 Dec 1995

5120-99-716-0962
Power Holding Tool

997160962
PE51235: RNCC: 3 | RNVC: 2
T.77771: RNCC: 5 | RNVC: 2
64DE55: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-363-2321
Hand Terminal Crimping Tool

993632321
169341-1: RNCC: 3 | RNVC: 2
446-816: RNCC: 5 | RNVC: 2

20 Dec 2002

5120-99-770-6852
Inspection Mirror

997706852
SE002600: RNCC: 3 | RNVC: 2
C-NIC TUM-C: RNCC: 5 | RNVC: 1

8 Dec 2005

5120-99-826-5389

5120-99-826-6591

5120-99-710-7634
Socket Spanner

997107634
NO PRIMARY REF 99-710-7634: RNCC: 3 | RNVC: 2
KU12805A: RNCC: 5 | RNVC: 2
RT20900: RNCC: 5 | RNVC: 2
64TN17: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-7736
Electrical Contact Remover

991207736
11-7880-20: RNCC: 3 | RNVC: 2
05-2230-20: RNCC: 5 | RNVC: 2
H20606: RNCC: 5 | RNVC: 2
05-2230-20: RNCC: 5 | RNVC: 9
11-7880-20: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-923-8088
Flat Tip Screwdriver

999238088
NO PRIMARY REF 99-923-8088: RNCC: 3 | RNVC: 2
F1G5343: RNCC: 5 | RNVC: 2
0276-2294: RNCC: 6 | RNVC: 9
0276-923-8088: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-5534
Master Pinion Gauge

998295534
15-020: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-967-0839

5120-99-558-5376
Spanner Wrench

995585376
11B0008: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-203-5228
Hydrau Relief Valve

992035228
NO PRIMARY REF 99-203-5228: RNCC: 3 | RNVC: 2
XSD1253: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-4956
Hand Hammer

991224956
KW135: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-453-7397
Hand Reamer

994537397
NO PRIMARY REF 99-453-7397: RNCC: 3 | RNVC: 2
HW33832: RNCC: 5 | RNVC: 2
64DT44: RNCC: 6 | RNVC: 9

7 Nov 1978

5120-99-122-9536
Coil Thread Mandrel

991229536
A29-5: RNCC: 3 | RNVC: 2
1C7562: RNCC: 6 | RNVC: 9
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-500-7097
Tee Hand Bar Wrench

995007097
J-29687-2: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-717-6470
Pliers

997176470
85: RNCC: 3 | RNVC: 1
11085: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4353
Blacksmith's Swage Block

999104353
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H160: RNCC: 5 | RNVC: 9
FA10227: RNCC: 6 | RNVC: 9
4A541: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-836-0523
Cardan Co Extractor

998360523
NO PRIMARY REF 99-836-0523: RNCC: 3 | RNVC: 2
352-429: RNCC: 5 | RNVC: 9
LV7FW352-429: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-2085
Hand Blind Riveter

991222085
7310-0010: RNCC: 3 | RNVC: 2
7310-0010: RNCC: 5 | RNVC: 2
BHJ0SRF312: RNCC: 5 | RNVC: 2
7310-0010: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-743-5919
Insertion Tool

5120-99-740-9398

5120-99-742-2914

5120-99-001-7030
Open End Wrench

5120-99-636-1008

5120-99-719-1009

5120-99-201-0128
Spanner Wrench

992010128
DEF1215: RNCC: 4 | RNVC: 1
BS2090: RNCC: 4 | RNVC: 1
SSML7-30: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-813-1490
Engine Valve Seat Insert Replacing Tool

998131490
NO PRIMARY REF 99-813-1490: RNCC: 3 | RNVC: 2
94268: RNCC: 5 | RNVC: 2
94268: RNCC: 5 | RNVC: 9

28 Jan 2010

5120-99-799-2617
Torque Wrench

997992617
BDS 80A: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 32: RNCC: 4 | RNVC: 1
430/6701: RNCC: 5 | RNVC: 2
010300: RNCC: 5 | RNVC: 2
B69500: RNCC: 5 | RNVC: 2
TABLE I(D): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-416-3071
Socket Wrench

994163071
EA1-88-531: RNCC: 3 | RNVC: 2
26FZ-95079: RNCC: 6 | RNVC: 9
26FZ95079: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-838-1888
Valve Guide Adaptor

998381888
LC 1D-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-438-2470
Socket Wrench Extension

994382470
13220: RNCC: 3 | RNVC: 2
12270020: RNCC: 5 | RNVC: 2

6 May 2005

5120-99-130-2314
Mechanical Puller

991302314
DT154: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-3811
Spring Adjuster

994653811
1H51: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-168-6483

5120-99-983-6725
Bearing Staking Installation Tool

999836725
PE34958: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-99-973-3591
Socket Wrench Adapter

999733591
2S440 13943: RNCC: 3 | RNVC: 2
FG963690003: RNCC: 6 | RNVC: 9

19 Mar 1996

5120-99-753-9942
Driver Bearing And

997539942
52000-00-20133: RNCC: 3 | RNVC: 2
52-20133: RNCC: 5 | RNVC: 2
52000-00-20133: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-261-5170
Wrench

5120-99-635-9312

5120-99-418-4885

5120-99-418-4831
Seal-Tube Pusher

5120-99-124-2241
C<Amp Base Vice

991242241
H2960: RNCC: 2 | RNVC: 2
PAT0276-910-6596: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-8378
Screwdriver Bit

992528378
492C: RNCC: 3 | RNVC: 2
1L/806: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-253-0039
Hydraulic Ja Handle

992530039
NO PRIMARY REF 99-253-0039: RNCC: 3 | RNVC: 2
13-1095/1: RNCC: 5 | RNVC: 2
HP2A: RNCC: 5 | RNVC: 2
FL9909R0027: RNCC: 6 | RNVC: 9

21 May 1999

5120-99-536-5967
Socket Head Screw Key

995365967
RPH70791A: RNCC: 3 | RNVC: 2
678-459083: RNCC: 6 | RNVC: 9
H678-459083: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-215-1827

5120-99-541-6973

5120-99-106-8220

5120-99-609-4972
Mechanical Puller

996094972
PE54935: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-762-2868
Socket Head Screw Key

997622868
0279-079-9: RNCC: 3 | RNVC: 2
30ZS821090000673: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-446-7018
Seal Insertion Tool

994467018
55-T20996: RNCC: 3 | RNVC: 2
T20996: RNCC: 5 | RNVC: 2
001C20168: RNCC: 6 | RNVC: 9

27 Jul 2000

5120-99-740-2928
Hub Seal Installer

5120-99-755-4752

5120-99-735-7984

5120-99-910-6033
Open End Wrench

999106033
BS192-TABLE 2: RNCC: 4 | RNVC: 1
H20838: RNCC: 5 | RNVC: 2
H5465: RNCC: 6 | RNVC: 9
TABLE I(E) 11/16X3/4A/F: RNCC: 6 | RNVC: 9
FA17149: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6404
Socket Wrench Socket

999106404
BS4006-TABLE 22 1-1/8WHIT: RNCC: 4 | RNVC: 1
HB1860: RNCC: 5 | RNVC: 2
TABLE I(E) 1-1/8WHIT: RNCC: 6 | RNVC: 9
1L177: RNCC: 6 | RNVC: 9
H5513: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-768-2697
Open End Wrench

997682697
MBEU 74181: RNCC: 3 | RNVC: 2
B/MBEU 74181: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-432-0723

5120-99-465-4097

5120-99-138-5114

5120-99-309-4329
Machinist's Scriber

993094329
EME 70593-358-86: RNCC: 3 | RNVC: 2
EME 70593-358: RNCC: 5 | RNVC: 1
EME 70593-358 SH6: RNCC: 5 | RNVC: 1
EME70593-358-86: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-561-3449
Fi Open Jaw Spanner

995613449
489-65: RNCC: 3 | RNVC: 2
489-20: RNCC: 5 | RNVC: 2
489-36: RNCC: 5 | RNVC: 2
489-45: RNCC: 5 | RNVC: 2
489-19: RNCC: 5 | RNVC: 2
360-860725: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-975-2143
Flange Holding Tool

999752143
205-053: RNCC: 3 | RNVC: 2
205-053: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-961-2542
Tool

999612542
2962HT 11-01 AY: RNCC: 3 | RNVC: 2
000NJ101: RNCC: 6 | RNVC: 9

19 Apr 2000

5120-99-942-5766
Elec Alignment Tool

999425766
NO PRIMARY REF 99-942-5766: RNCC: 3 | RNVC: 2
XT750: RNCC: 5 | RNVC: 2
TT1: RNCC: 5 | RNVC: 2
TT1: RNCC: 5 | RNVC: 2
TT1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-728-0783

5120-99-836-2162
Hook And Bar Assemb

5120-99-122-2573

5120-99-834-8254

5120-99-122-3853

5120-99-252-8382
Fine Ratchet Handle

992528382
E-77: RNCC: 3 | RNVC: 2
1L/801: RNCC: 6 | RNVC: 9
E77: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6251
Open End Wrench

999106251
BS192-TABLE 3: RNCC: 4 | RNVC: 1
H20913: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H5499: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
FA17288: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-507-3264
Lifting Pneumatic Bag

995073264
TME600: RNCC: 3 | RNVC: 2

24 Mar 2009

5120-99-468-5103

5120-99-477-6662
Socket Wrenc Socket

5120-99-517-4903
Open End Wrench

5120-99-532-5039
Extractor Assembly

995325039
YJ70640A: RNCC: 3 | RNVC: 2
YJ70640A ISSUE1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-2589
Open End Wrench

991362589
56978-0047: RNCC: 3 | RNVC: 2
56978-0047: RNCC: 5 | RNVC: 2
363-136-2589: RNCC: 6 | RNVC: 9
P11548: RNCC: 6 | RNVC: 9
070-363172: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6261
Open End Wrench

999106261
BS2583: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H5509: RNCC: 6 | RNVC: 9
H5509: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-858-2160
Leatherworker's Modeling Tool

998582160
NO PRIMARY REF 99-858-2160: RNCC: 3 | RNVC: 2
FA0077: RNCC: 5 | RNVC: 2

26 Jan 2011

5120-99-724-0672

5120-99-715-1254

5120-99-134-7710
Offset Box Wrench

991347710
NO PRIMARY REF 99-134-7710: RNCC: 3 | RNVC: 2
QSOC382-12CL: RNCC: 5 | RNVC: 2
C576-70T269265: RNCC: 6 | RNVC: 9

28 May 2002

5120-99-714-6844
Torque Wrench

997146844
WB808-8BA: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-5023

5120-99-112-4478

5120-99-132-1548
Ha Entrenching Tool

991321548
MIL-I-43684: RNCC: 3 | RNVC: 2

5 Jun 1991

5120-99-452-9109
Seal Installer

994529109
DROP321V-5: RNCC: 3 | RNVC: 2
DROP321V-5/1: RNCC: 6 | RNVC: 9
E413VLC: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-455-7760
Slip Ring Bear Tool

994557760
EA6205G602-041: RNCC: 3 | RNVC: 2

13 Jan 2010

5120-99-621-9424

5120-99-465-7007

5120-99-139-7783
Socket Head Screw Key

991397783
100161-0000-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-981-3628
Torque Extension

999813628
MTP/FRDH14: RNCC: 3 | RNVC: 2
010B2-050: RNCC: 6 | RNVC: 9

1 Mar 2001

5120-99-423-8214
Socket Wrench

994238214
9028-34: RNCC: 3 | RNVC: 2
558171: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-540-9976
Spanner Wrench

995409976
T648: RNCC: 3 | RNVC: 2
H492-419522: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-836-2909
Socket Wrench

998362909
NO PRIMARY REF 99-836-2909: RNCC: 3 | RNVC: 2
139AT: RNCC: 5 | RNVC: 2
E2718: RNCC: 5 | RNVC: 2
L3-21-48: RNCC: 5 | RNVC: 2
LW11-36: RNCC: 5 | RNVC: 2
LV7GA11-36: RNCC: 6 | RNVC: 9
16C3670: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-6091
Ring Nut Wrench And

995396091
EA6305G577-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-124-0419
Torque Wrench

991240419
WB808-6UNC: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H6336: RNCC: 6 | RNVC: 9
0276-276060: RNCC: 6 | RNVC: 9
1H188: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-716-9469
Mechanical Puller

997169469
NO PRIMARY REF 99-716-9469: RNCC: 3 | RNVC: 2
PE50338: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-460-3983
Adapter

994603983
NO PRIMARY REF 99-460-3983: RNCC: 3 | RNVC: 2
PE50316: RNCC: 5 | RNVC: 2
T86712: RNCC: 5 | RNVC: 2
64DE298: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-738-5141
Socket Head Scr Key

5120-99-734-8936

5120-99-782-2126

5120-99-867-3241

5120-99-867-8529
Socket Wrench Socket

998678529
18300A 7/8: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-99-968-4043
Hand Terminal Crimping Tool

999684043
Z20-320: RNCC: 3 | RNVC: 2

17 Jul 2004

5120-99-784-8476
Deluxe Tool Kit

997848476
6005-0013: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-1653

5120-99-710-6567
Stud Inserter

5120-99-114-4870
Open End Wrench

5120-99-659-6708

5120-99-710-7279

5120-99-659-4774
Elec Insertion Tool

5120-99-145-0812

5120-99-607-6521
Dimpling Tool Assem

996076521
NO PRIMARY REF 99-607-6521: RNCC: 3 | RNVC: 2
S3S90017000: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-149-1060
Spanner Wrench

991491060
460001682-46: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-5487
Face Spanner Wrench Socket

996595487
CHA750-235-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-865-7191
Extraction Tool

998657191
410/10625: RNCC: 3 | RNVC: 2

29 Aug 2012

5120-99-391-1615
Clamp Piece

993911615
5000-1128: RNCC: 3 | RNVC: 2
003A-4843: RNCC: 6 | RNVC: 9
TRUMPF5000-1128: RNCC: 6 | RNVC: 9

6 Dec 2002

5120-99-380-6592
Open End Wrench

993806592
001285092: RNCC: 3 | RNVC: 2
A 1007004: RNCC: 5 | RNVC: 2
SSK/Y/581/00/0106/104: RNCC: 5 | RNVC: 2

12 Mar 2001

5120-99-758-5233
Brake Hose Adaptor

997585233
E690-T-39: RNCC: 3 | RNVC: 2
4-E690-T-39: RNCC: 5 | RNVC: 2
E690T-3908NS: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-985-9472
Locking Disk

999859472
V-36-7423-50: RNCC: 3 | RNVC: 2

8 Jan 2010

5120-99-184-5696
Right A Swivel Head

991845696
07346-04000: RNCC: 3 | RNVC: 2
030BM-065: RNCC: 6 | RNVC: 9

6 Feb 2003

5120-99-138-5117
Swaging Tool

991385117
NO PRIMARY REF 99-138-5117: RNCC: 3 | RNVC: 2
3002091: RNCC: 5 | RNVC: 2
3002091: RNCC: 5 | RNVC: 2
PHS30: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-794-4230
Screwdriver Bit

997944230
440-3-ACR: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-761-3734
Open End Wrench

997613734
P461ZS1029/11: RNCC: 3 | RNVC: 2
H727-460365: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-716-3671
Wrench

997163671
WD4188-00311-041: RNCC: 3 | RNVC: 2
WD4188-003111TEM1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-127-5964
Screw Thread Insert Inserter

991275964
3552-4M3: RNCC: 3 | RNVC: 2
85-25-19-10-1741: RNCC: 5 | RNVC: 2
3405508: RNCC: 5 | RNVC: 2
64NG977: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-4914
Spanner Wrench

996664914
99SQ-50-80: RNCC: 3 | RNVC: 2
RSK-1646-05019: RNCC: 5 | RNVC: 2

9 Aug 2005

5120-99-360-1603
Plier Wrench

993601603
NO PRIMARY REF 99-360-1603: RNCC: 3 | RNVC: 2
21-6082: RNCC: 5 | RNVC: 2

22 Aug 2002

5120-99-558-4015
Open End Wrench

995584015
SB2248-1: RNCC: 3 | RNVC: 2
321: RNCC: 5 | RNVC: 2
H838-356255: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-662-6902
Trigger Setti Lever

996626902
AITG-1752-A3: RNCC: 3 | RNVC: 2

19 Oct 2000

5120-99-714-4049
Spanner

997144049
NO PRIMARY REF 99-714-4049: RNCC: 3 | RNVC: 2
FH152-925-7: RNCC: 5 | RNVC: 2
2PC4432: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-547-1304
Spanner Wrench

995471304
85-119-19-10-1032: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-5468
Drive Tool

991385468
NO PRIMARY REF 99-138-5468: RNCC: 3 | RNVC: 2
A2N20452719: RNCC: 5 | RNVC: 2
D416: RNCC: 5 | RNVC: 2
HDRS6-S: RNCC: 5 | RNVC: 2
TSC503-059: RNCC: 6 | RNVC: 9
FW9925G0064: RNCC: 6 | RNVC: 9

3 Nov 1999

5120-99-563-0491
Fi Open Jaw Spanner

995630491
D79159: RNCC: 3 | RNVC: 2
H363-259348: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-520-2960
Spanner Wrench

995202960
85-25-19-10-1028: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-958-8232
Spanner Wrench

999588232
WG1588-0030-041: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-180-3577
Home Adjusting Tool

991803577
JH-00-001: RNCC: 3 | RNVC: 2

31 Oct 2004

5120-99-391-2064
Socket Wrench Extension

993912064
BSP22-0032: RNCC: 3 | RNVC: 2
0623S-002: RNCC: 6 | RNVC: 9

11 May 2006

5120-99-783-7677
Resistor Ad Spanner

997837677
28158: RNCC: 3 | RNVC: 2
85-690-1637: RNCC: 6 | RNVC: 9

26 Jun 1984

5120-99-148-4663
Socket Head Screw Key

991484663
AWBMCG1604: RNCC: 3 | RNVC: 2
091SD-002: RNCC: 6 | RNVC: 9

29 Apr 2009

5120-99-537-2312

5120-99-450-8421

5120-99-667-8471
Seal Inserter

996678471
SGE3215-003: RNCC: 3 | RNVC: 2
110J8-026: RNCC: 6 | RNVC: 9

21 Jan 2011

5120-99-146-0084
Socket Head Screw Key Set

991460084
NO PRIMARY REF 99-146-0084: RNCC: 3 | RNVC: 2
181-626: RNCC: 5 | RNVC: 9

12 Aug 1999

5120-99-459-0698
Combination Spanner

994590698
NO PRIMARY REF 99-459-0698: RNCC: 3 | RNVC: 2
AK740A: RNCC: 5 | RNVC: 2
64VV2801: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-120-7889
Open End Wrench

991207889
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
BS192-TABLE 2 1-1/16X1-1/4A/F: RNCC: 4 | RNVC: 1
H20098: RNCC: 5 | RNVC: 2
874 780 M1: RNCC: 6 | RNVC: 9
874780M1: RNCC: 6 | RNVC: 9
TABLE 2. 1 1/16 A/F X 1 1/4 A/F: RNCC: 6 | RNVC: 9
F1FA17102: RNCC: 6 | RNVC: 9
TABLE I(E) 1-1/16X1-1/4A/F: RNCC: 6 | RNVC: 9
3J106125: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-764-0521
Socket Wrench Handle Bar

997640521
CH140061/5: RNCC: 3 | RNVC: 2
CH140061-5: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-910-6455
Textile M Stamp Set

999106455
H2576: RNCC: 2 | RNVC: 2
A4/11083: RNCC: 5 | RNVC: 1
1C5013: RNCC: 6 | RNVC: 9
FA17725: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-761-3725
Spanner Wrench

997613725
P461Z1297/2: RNCC: 3 | RNVC: 2
11/P461Z1297/2: RNCC: 5 | RNVC: 2
T.740/13: RNCC: 5 | RNVC: 2
H727-460352: RNCC: 6 | RNVC: 9
5120-99-309-2561: RNCC: 6 | RNVC: 9
994379485: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-747-6806
Tool.Straightening

997476806
V70100-656-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-829-4288
Indicator Set Block

998294288
15-008-03: RNCC: 3 | RNVC: 2
15-008-03-A: RNCC: 5 | RNVC: 2
205-044-02: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-561-4074
Wrench Spanner

995614074
1647: RNCC: 3 | RNVC: 2
519000: RNCC: 5 | RNVC: 2
106-949223: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-6861
Chisel

991376861
EL56-160: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-3104

5120-99-777-4147
Pliers

5120-99-129-8804

5120-99-812-3911

5120-99-542-6210
Ratchet Wrench

5120-99-776-4930

5120-99-541-9460
Open End Box Wrench

5120-99-527-2037
Spanner Wrench

995272037
11-454-19-10-1005: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-643-7214
Socket Wrench

996437214
S8-44-70XAA: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-418-4847

5120-99-418-4853
Bearing Pusher

5120-99-735-7989

5120-99-628-8892

5120-99-418-4844
Wrench

5120-99-716-1546
Remove Adaptor Tool

997161546
EA6505G527-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-527-2278
Beeper Extractor

995272278
A33832: RNCC: 3 | RNVC: 2
A33832: RNCC: 5 | RNVC: 2
562871: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-753-1373
Tri Square Spline S

997531373
MS114: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-728-6789
Drill Guide

997286789
D 0.290: RNCC: 3 | RNVC: 2
D.29: RNCC: 5 | RNVC: 2
3AP5195: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-732-7169
Drive Pin Punch

997327169
W 5747 321: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-819-1793
Mechanical Puller

998191793
FV719115-1SSUE1: RNCC: 3 | RNVC: 2
AT845: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-144-9799
Mechanical Puller

991449799
NO PRIMARY REF 99-144-9799: RNCC: 3 | RNVC: 2
AE0977: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-083-3463
Bearing Installation Tool Base

990833463
P-891422-019: RNCC: 3 | RNVC: 2
BM-P-891422-019: RNCC: 5 | RNVC: 2
P891422-019: RNCC: 5 | RNVC: 2

3 Oct 1995

5120-99-364-0849
Pre Screwdriver Set

993640849
TL-502-861: RNCC: 3 | RNVC: 2
TL-502-861: RNCC: 3 | RNVC: 9

28 Oct 2008

5120-99-661-9248
Crab Clamp

5120-99-775-2510
Adjusting Spee Tool

997752510
393212: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-508-2875
Spanner Wrench

995082875
DB112114: RNCC: 3 | RNVC: 2
DB112114: RNCC: 5 | RNVC: 2

17 Apr 2009

5120-99-605-8899
Spanner Wrench

996058899
A4/507288: RNCC: 3 | RNVC: 2
PDS/H014: RNCC: 6 | RNVC: 9

14 Feb 2003

5120-99-139-1040
Screw Thread Insert Tang Breakoff Tool

991391040
DEFSTAN51-17-1D: RNCC: 2 | RNVC: 2
P2MC: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 5 | RNVC: 2
1D: RNCC: 6 | RNVC: 9
75A80009: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-962-3391
Seizers

999623391
HAL2/24: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-1002
Electrical Remover

991241002
CET20-11: RNCC: 3 | RNVC: 2
CET20-11: RNCC: 5 | RNVC: 9
CET-20-11: RNCC: 6 | RNVC: 9
SW211A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-432-3481
Spanner

994323481
NO PRIMARY REF 99-432-3481: RNCC: 3 | RNVC: 2
CM365: RNCC: 5 | RNVC: 2
88612-610-707: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-608-9363
Adaptor

996089363
EA6605G505-165: RNCC: 3 | RNVC: 2
1MEVGKQ: RNCC: 6 | RNVC: 9

17 Apr 2004

5120-99-595-4561
Piston Tool

995954561
PV221-539A: RNCC: 3 | RNVC: 2

9 Jan 1995

5120-99-465-6941
Die

994656941
NO PRIMARY REF 99-465-6941: RNCC: 3 | RNVC: 2
1C5507: RNCC: 5 | RNVC: 2
4656941: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-553-0950
Hand Tool

995530950
STD419D/2Y: RNCC: 3 | RNVC: 2
26DL-95973: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-725-6345
Mechanical Puller

997256345
BT2464: RNCC: 3 | RNVC: 2
892/00176: RNCC: 5 | RNVC: 2
892/000176: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-571-3312
Boilertu Wire Brush

995713312
NO PRIMARY REF 99-571-3312: RNCC: 3 | RNVC: 2
0476-4061: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-662-9788
Torque Wrench

996629788
TO854/9C: RNCC: 3 | RNVC: 2
311-008867: RNCC: 5 | RNVC: 2
SW211A2: RNCC: 6 | RNVC: 9

1 Mar 1996

5120-99-335-2935
Socket Wrench Screwdriver Attachment

993352935
23070030: RNCC: 3 | RNVC: 9

14 Nov 2011

5120-99-750-7507
Bearing Punch

997507507
2067T018: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-750-0531
Open End Wrench

997500531
017244: RNCC: 3 | RNVC: 2

20 Mar 2013

5120-99-732-7564
Forming Tool

997327564
T451: RNCC: 3 | RNVC: 2

15 Aug 1986

5120-99-749-6416
Closure Tool

997496416
HLN1216: RNCC: 3 | RNVC: 2
HLN1033 ITEM 80: RNCC: 5 | RNVC: 2
HLN1216ND: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-313-3585
Mirror Lense

993133585
LR60: RNCC: 3 | RNVC: 2
1B-6156: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-619-5187
Box Wrench

996195187
KU13052: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-720-3138
Socket Wrench

997203138
P3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-424-0974
Open End Box Wrench

994240974
A197768: RNCC: 3 | RNVC: 2
A197768: RNCC: 5 | RNVC: 9
26FX95166: RNCC: 6 | RNVC: 9
26FX95166: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-5014
Resetting Tool

995395014
NO PRIMARY REF 99-539-5014: RNCC: 3 | RNVC: 2
P5173348230: RNCC: 5 | RNVC: 2

19 Mar 1990

5120-99-369-1420
Plate Assembly

993691420
EA6305G599-043: RNCC: 3 | RNVC: 2

14 Mar 2004

5120-99-434-7202
Screw Extractor

994347202
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13171: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-964-7311
Tool Hand Closing

999647311
NO PRIMARY REF 99-964-7311: RNCC: 3 | RNVC: 2
12S1057: RNCC: 5 | RNVC: 2

7 Nov 1979

5120-99-910-4563
Stud Remover

999104563
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
H699: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-789-4568
Boiler Tube Wire Brush

997894568
50111-1015: RNCC: 3 | RNVC: 2
6115-99-563-6167: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-250-9493
Lifting Yoke

992509493
50/40: RNCC: 3 | RNVC: 2
008.125.057: RNCC: 5 | RNVC: 2
11107: RNCC: 5 | RNVC: 2
D5410773 ITEM 32: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-3829
Torque Screw Driver

994653829
1H456: RNCC: 3 | RNVC: 2
DEFSTAN 51-11 PART 32: RNCC: 4 | RNVC: 1
76/136: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-5516
Restrainer Assembly

996075516
NO PRIMARY REF 99-607-5516: RNCC: 3 | RNVC: 2
PE27859: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-560-5313
Probe Wires

995605313
7244-6AA: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-208-9483
Hand Hammer

992089483
07-408: RNCC: 3 | RNVC: 2
408: RNCC: 5 | RNVC: 2
708P: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-130-2154
Open End Box Wrench

991302154
41-08-10-12: RNCC: 3 | RNVC: 2
1C8163: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-5720
Spanner Wrench

994225720
N0D2107-81: RNCC: 3 | RNVC: 2
AN3998: RNCC: 5 | RNVC: 2
12124711: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-415-5629

5120-99-420-4003

5120-99-418-7251

5120-99-769-9680
Guide Pin Set

997699680
VT10723: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-779-4250

5120-99-724-0661

5120-99-726-4074

5120-99-430-8213
Spanner

994308213
NO PRIMARY REF 99-430-8213: RNCC: 3 | RNVC: 2
WT23746: RNCC: 5 | RNVC: 2
0624-10B222: RNCC: 6 | RNVC: 9

23 Sep 1980

5120-99-114-3823
Panel Extractor

991143823
NO PRIMARY REF 99-114-3823: RNCC: 3 | RNVC: 2
SCB24770: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-459-0564
Ball End Punch

994590564
HW13656: RNCC: 3 | RNVC: 2
64VV391: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-973-2820
Deck Lifting Hook

999732820
MM534: RNCC: 3 | RNVC: 2
FL000M60119: RNCC: 6 | RNVC: 9

22 Aug 2000

5120-99-987-8234
Timing Disc

999878234
100900: RNCC: 3 | RNVC: 2
100900: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-1035
Combination Box And Open End Wrench

991241035
RJ375: RNCC: 3 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H6442: RNCC: 6 | RNVC: 9
F1FA17076: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-6105
Tyre Lever

994656105
NO PRIMARY REF 99-465-6105: RNCC: 3 | RNVC: 2
4A1306: RNCC: 5 | RNVC: 2

29 May 1981

5120-99-131-1184
Socket Head Screw Key

991311184
1040-0064 GA: RNCC: 3 | RNVC: 2
10400064: RNCC: 5 | RNVC: 2

11 Jan 1995

5120-99-665-6638
Speci Slide Hammer

996656638
17229067-0: RNCC: 3 | RNVC: 2
17229067-0: RNCC: 5 | RNVC: 2
021JB-001: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-764-9756
Open End Wrench

997649756
NJL487: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-759-9105
Open End Wrench

997599105
2JM810: RNCC: 3 | RNVC: 2
100161-9000-003: RNCC: 5 | RNVC: 2
600209: RNCC: 5 | RNVC: 2
6JM810: RNCC: 5 | RNVC: 2
6JM810: RNCC: 5 | RNVC: 2
56530-183: RNCC: 5 | RNVC: 2
E600209: RNCC: 5 | RNVC: 2
BS192: RNCC: 6 | RNVC: 9
99-139-7785: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-161-4196
Reaction Tool

991614196
EA6305G601-045: RNCC: 3 | RNVC: 2

17 Apr 2003

5120-99-466-1049
Crowfoot Attachment

994661049
NO PRIMARY REF 99-466-1049: RNCC: 3 | RNVC: 2
ABC625: RNCC: 5 | RNVC: 9
1L487: RNCC: 6 | RNVC: 9

18 Jan 1977

5120-99-125-4300
Spanner Wrench

991254300
1256/90 ITEM 12: RNCC: 3 | RNVC: 2
1256/90: RNCC: 5 | RNVC: 1
1256/90-12: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-8091
Armourers Drift

994658091
NO PRIMARY REF 99-465-8091: RNCC: 3 | RNVC: 2
AD10659-6: RNCC: 5 | RNVC: 2
1E5124: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-977-7221
Screwdriver Crosspo

999777221
420-277-835: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-419-1003
Socket Wrench Socket

994191003
NMT-178: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-608-6516
Dogging Spigot

996086516
NO PRIMARY REF 99-608-6516: RNCC: 3 | RNVC: 2
HW46909: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-7948
Craftsman's Tweezers

999107948
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H4601: RNCC: 6 | RNVC: 9
H4601: RNCC: 6 | RNVC: 9
F1FA19435: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-841-9883
Socket Wrench

998419883
6CRY2: RNCC: 3 | RNVC: 2
05118114002: RNCC: 5 | RNVC: 2

9 Dec 2013

5120-99-139-7061
Socket H Wrench Key

5120-99-840-1139
Burner

5120-99-882-0774

5120-99-466-5482

5120-99-466-9411
Socket Wrench

5120-99-861-9522
Socket Head Screw Key

998619522
0.316.90150: RNCC: 3 | RNVC: 2

9 Sep 1994

5120-99-662-6937
Belt Tension R Tool

996626937
418129: RNCC: 3 | RNVC: 2
FL9534K0001: RNCC: 6 | RNVC: 9

6 Jul 1995

5120-99-662-1753
Insertion Tool

996621753
7552-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-391-1301
Cup Spreader

993911301
51-C-14: RNCC: 3 | RNVC: 2

24 Apr 2001

5120-99-254-2581
Guide Retainer Tool

992542581
11-P461F1751: RNCC: 3 | RNVC: 2
20225A: RNCC: 5 | RNVC: 1
T.710/5/3: RNCC: 5 | RNVC: 2
5120-99-812-4729: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6312
Socket Wrench Extension

999106312
BS4006-TABLE 28 9/32 A/F: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4551: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-2987
Link

996542987
P-890196-001: RNCC: 3 | RNVC: 2
P890196-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-531-8821
C Spanner

995318821
NO PRIMARY REF 99-531-8821: RNCC: 3 | RNVC: 2
UX11460: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-469-3654
Open End Wrench

994693654
AE0704: RNCC: 3 | RNVC: 2
27M13420: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-714-0676
Bearing And Driver

997140676
PE8399: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-256-0285
Spanner Wrench

992560285
002363: RNCC: 3 | RNVC: 2
V8551: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-766-3689
Spanner Wrench

997663689
038753: RNCC: 3 | RNVC: 2
38753: RNCC: 5 | RNVC: 2
TNV3838: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-345-7211
Door Forcer

993457211
1003: RNCC: 3 | RNVC: 2

27 Jul 2006

5120-99-612-1417
Socket Wrench Socket

996121417
121E93-715-00-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-722-2614
Conrod Arbor Adapto

997222614
336-102A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-747-5673
Mechanical Puller

997475673
P-891190-407: RNCC: 3 | RNVC: 2
P891190-407: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-619-5773
Spanner W Extension

996195773
NO PRIMARY REF 99-619-5773: RNCC: 3 | RNVC: 2
B26-68: RNCC: 5 | RNVC: 2
UT907-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-422-4616
Box Wrench

994224616
N37276-12: RNCC: 3 | RNVC: 2
88604-606-045: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-792-1687
Spanner Wrench

997921687
100575-3104-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-961-4044
Spanner Wrench

5120-99-333-1405

5120-99-208-9706

5120-99-600-8729
Spanner Wrench

996008729
64Y1547: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-417-9264
Installer

994179264
9996861-2: RNCC: 3 | RNVC: 2
9996861-2: RNCC: 5 | RNVC: 2

5 Aug 2003

5120-99-607-0048
Socket Wrench Crowfoot Attachment

996070048
D33770-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-282-2255
Male Square Insert

992822255
P-1412: RNCC: 3 | RNVC: 2
P-1412: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-6434
Sheet Metalworking Stake

999106434
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2560: RNCC: 6 | RNVC: 9
H2560: RNCC: 6 | RNVC: 9
1C5081: RNCC: 6 | RNVC: 9
FA17701: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-145-3041
Mechanical Puller

991453041
WB5-88-4325: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-5583
Drive Pin Punch

999105583
BS3066: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 33: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
FA16010: RNCC: 6 | RNVC: 9
H1932: RNCC: 6 | RNVC: 9
1B1830: RNCC: 6 | RNVC: 9
DL-9-A-H1932: RNCC: 6 | RNVC: 9
H1932: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-3067
Pressure Pad

996543067
P-890399-015: RNCC: 3 | RNVC: 2
P890399-015: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-227-6514
Socket

992276514
EKA20995: RNCC: 3 | RNVC: 2

25 Nov 2008

5120-99-728-3876
Extraction Tool

997283876
91074-1: RNCC: 3 | RNVC: 2
DRK310: RNCC: 6 | RNVC: 9
1H/1018: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-0483
Coil Threa Inserter

991380483
DEFSTAN51-17-2C: RNCC: 2 | RNVC: 2
SM1P122: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 5 | RNVC: 2
2C: RNCC: 6 | RNVC: 9
1C8406: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-809-2797
Leveling-Support Jack

998092797
5107-15-002: RNCC: 3 | RNVC: 2
013FS-014: RNCC: 6 | RNVC: 9

24 Dec 2001

5120-99-122-4130
Cont Insertion Tool

5120-99-619-1278

5120-99-120-9454

5120-99-465-1975

5120-99-535-6692
Reactor Torque

5120-99-021-8507
Backlash Check Tool

5120-99-619-1497

5120-99-124-4138

5120-99-705-6573
Flat Tip Screwdriver

997056573
NO PRIMARY REF 99-705-6573: RNCC: 3 | RNVC: 2
459-4010: RNCC: 5 | RNVC: 2
459-4010: RNCC: 5 | RNVC: 2

19 Jul 2005

5120-99-748-5214
Spanner Wrench

997485214
100403-0107-001: RNCC: 3 | RNVC: 2
904813-0200-000: RNCC: 5 | RNVC: 2
904813-200-000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-659-4632
Face Spanner Wrench Socket

996594632
83790016-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-940-4984
Torque Wrench Adapter

999404984
29877: RNCC: 3 | RNVC: 2

14 Nov 1992

5120-99-910-4769
Tinmans Horse Head

999104769
H1381: RNCC: 3 | RNVC: 2
F1FA14545: RNCC: 6 | RNVC: 9
1B3561: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-909-6357
Box Wrench

999096357
VDS39668: RNCC: 3 | RNVC: 2

24 Aug 2005

5120-99-316-8054
Mandrel

993168054
39257: RNCC: 3 | RNVC: 2
030470075: RNCC: 6 | RNVC: 9

22 Jan 2003

5120-99-923-8376
Ins Probe Extension

999238376
EXT: RNCC: 3 | RNVC: 2
5A4222: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-513-8490
Socket Head Screw Key

995138490
01TC15328: RNCC: 3 | RNVC: 2

15 May 1995

5120-99-459-0495
Socket Wrench Crowfoot Attachment

994590495
FB212922: RNCC: 3 | RNVC: 2
FB212922: RNCC: 5 | RNVC: 9
64AC217: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-978-1586
Screwdriver Bit

999781586
1USB5M: RNCC: 3 | RNVC: 2
ET.105: RNCC: 5 | RNVC: 2
UW331A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-977-7928
Tool

999777928
3924-60272: RNCC: 3 | RNVC: 2
99PC01094: RNCC: 6 | RNVC: 9

24 Jun 1999

5120-99-978-1902
Screwdriver Bit

999781902
2UPZD2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-839-4374
Combination Box And Open End Wrench

998394374
FV2285699: RNCC: 3 | RNVC: 2
FV2285699: RNCC: 5 | RNVC: 2

23 Nov 2009

5120-99-495-5411
Expander

994955411
HK080: RNCC: 3 | RNVC: 2
FV 1026560 ITEM 4: RNCC: 6 | RNVC: 9
FV 1026560-4: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-663-7721
Adjusting Key

996637721
PG4570102: RNCC: 3 | RNVC: 2
M33014942-6: RNCC: 5 | RNVC: 2
FV2206332: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

12 Aug 1997

5120-99-051-2804
Spanner

990512804
MC 61-86: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-6368
Torque Wrench

997696368
558/1/05544: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-664-3712
Extractor

996643712
460009153C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-3915
Socket Wrench

991363915
5016917-02: RNCC: 3 | RNVC: 2
FK9706W0105: RNCC: 6 | RNVC: 9

4 Feb 1998

5120-99-552-4899
Wrench Spanner

995524899
DB6312-28: RNCC: 3 | RNVC: 2
190-977294: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-665-5736
Mechanical Puller

996655736
ESK 5029 22: RNCC: 3 | RNVC: 2
209-042335: RNCC: 5 | RNVC: 2

19 Feb 2002

5120-99-122-6624
Hand Rivet Set

991226624
NO PRIMARY REF 99-122-6624: RNCC: 3 | RNVC: 2
1C8074: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-120-6017
Socket Wrench Socket

991206017
LSA 236: RNCC: 3 | RNVC: 2
H20921: RNCC: 5 | RNVC: 2
LDH 362 LOCK-ON: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
F1FA17473: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-300-1796
Face Spanner Wrench Socket

993001796
MD 31623-215: RNCC: 3 | RNVC: 2
MD 31623-215A2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-1568
Immobiliser

996071568
NO PRIMARY REF 99-607-1568: RNCC: 3 | RNVC: 2
UT639: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-782-2764
Scraper

997822764
7044-69E: RNCC: 3 | RNVC: 2

25 Feb 1987

5120-99-979-2612
Open End Wrench

999792612
SGE4332-0400: RNCC: 3 | RNVC: 2
107E6-014: RNCC: 6 | RNVC: 9

18 Nov 2010

5120-99-910-6255
Open End Wrench

999106255
BS2583-TABLE 1 7/16BS: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-763-0282
Mechanical Puller

997630282
48415-A133/403: RNCC: 3 | RNVC: 2
48415A133-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-659-6962
Screw Thread Insert Inserter

996596962
HST111A-405: RNCC: 3 | RNVC: 2
HST111A405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-807-4242
Spanner Wrench

998074242
S14-94-1262 51/6 ITEM 2: RNCC: 3 | RNVC: 2
S14-94-1262: RNCC: 5 | RNVC: 1
S14-94-1262 51/6: RNCC: 5 | RNVC: 1
S14-94-1262 51/6/2: RNCC: 5 | RNVC: 2

15 Feb 1995

5120-99-782-7634
Combination Box And Open End Wrench

997827634
150-319: RNCC: 3 | RNVC: 2
2484-9000-033: RNCC: 5 | RNVC: 2
RJM7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-773-6718
Spanner Wrench

997736718
T10181-001-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-777-8055
Electronic Equipment Alignment Tool

997778055
100006-0000-001: RNCC: 3 | RNVC: 2

8 May 1985

5120-99-964-4122
Open End Wrench

5120-99-852-8388

5120-99-535-3826
Immersion H Spanner

995353826
01 2035: RNCC: 3 | RNVC: 2

28 Jan 1993

5120-99-465-7245
Bearing And H Drift

Load More Results