What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 97 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 97 of 108

5120-99-423-1305

5120-99-418-4900

5120-99-789-3009
Torque Wrench Adapter

997893009
FTHM 17: RNCC: 3 | RNVC: 2
FTHM 17: RNCC: 5 | RNVC: 2
29931: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-788-1005
Box Wrench

997881005
B21839: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1823
Face Spanner Wrench Socket

996171823
HU 17448: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-5490
Hand Terminal Crimping Tool

991385490
576793: RNCC: 3 | RNVC: 2
67J10003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-2034

5120-99-654-4079
Mechanical Puller

996544079
460009128C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-114-4820
Offset Rig Pin

5120-99-826-8074
Fi Open Jaw Spanner

5120-99-826-8097

5120-99-826-5229

5120-99-826-6756

5120-99-434-7285
Socket Wrench

994347285
BS2558-TABLE 2 1X1-1/16A/F: RNCC: 3 | RNVC: 1
F1FA17058: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-963-0936

5120-99-130-7692
Eyepiece A Top Tool

991307692
70015/20/2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-112-4114
Torque Wrench Adapter

991124114
29955: RNCC: 3 | RNVC: 2
UN214A3: RNCC: 6 | RNVC: 9

20 May 1994

5120-99-910-5958
Adjustable Wrench

999105958
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20957: RNCC: 5 | RNVC: 2
318C: RNCC: 5 | RNVC: 2
600197: RNCC: 5 | RNVC: 2
E600197: RNCC: 5 | RNVC: 2
1C2227: RNCC: 6 | RNVC: 9
F1FA17007: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H2422: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-722-8106
Socket Wrench Handle Bar

997228106
C-56921: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-7753
Barrel Ha Separator

997107753
NO PRIMARY REF 99-710-7753: RNCC: 3 | RNVC: 2
101A500046A: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-910-5879
Flat Tip Screwdriver

999105879
DEFSTAN51-11 PART 17: RNCC: 4 | RNVC: 1
H20091: RNCC: 5 | RNVC: 2
DEF1191: RNCC: 5 | RNVC: 9
DEF1191-5197: RNCC: 5 | RNVC: 9
H5197: RNCC: 6 | RNVC: 9
1C3193: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-418-4857
Drift Cylinder

5120-99-461-4898

5120-99-420-4007

5120-99-420-4056

5120-99-418-4887
Timing Rig Bush

5120-99-418-4826
Bearing Pusher

5120-99-418-4848
Bearing Pusher

5120-99-418-4876

5120-99-793-2128

5120-99-755-0556

5120-99-198-5491
Dummy Shaft

991985491
AP61895: RNCC: 3 | RNVC: 2
118291ST: RNCC: 6 | RNVC: 9

5 Feb 1990

5120-99-715-9923
Wrench Spanner

997159923
ST38673: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-866-9591
Mechanical P Sleeve

998669591
NO PRIMARY REF 99-866-9591: RNCC: 3 | RNVC: 2
FV538377: RNCC: 5 | RNVC: 2
9ACRFV538377: RNCC: 6 | RNVC: 9

24 May 1977

5120-99-710-7720
Socket Wrench H Bar

997107720
NO PRIMARY REF 99-710-7720: RNCC: 3 | RNVC: 2
PC3614: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-743-1486
Assembly Tool

997431486
AT 2/01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-477-2063
Open End Wrench

994772063
460009526-C: RNCC: 3 | RNVC: 2
460009526C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-145-0824

5120-99-122-7629

5120-99-016-1103
Brake Release Tool

5120-99-124-3940

5120-99-964-8258
Wrench Spanner

5120-99-869-2210
Ratchet Wrench

998692210
D/DGES(A)/133/01/02: RNCC: 4 | RNVC: 1
SIZE 3/8 X 7/16IN. A/F: RNCC: 6 | RNVC: 9
TEJ6003: RNCC: 6 | RNVC: 9

14 Sep 1994

5120-99-285-3608
Seal Inserter

992853608
DAE.7671.GSE: RNCC: 3 | RNVC: 2

27 Oct 1999

5120-99-910-7904
Riv Snap And Set Up

999107904
DEF1221: RNCC: 4 | RNVC: 1
H2387: RNCC: 6 | RNVC: 9
1C5001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-867-3501
Spanner Cxlargexmai

998673501
27581A: RNCC: 3 | RNVC: 2
LV8REBR27581A: RNCC: 6 | RNVC: 9

10 May 1980

5120-99-825-4638
Spra Alignment Tool

998254638
LT1273: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-825-4423
Dowel Withdrawal To

998254423
FV805738: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-832-2008

5120-99-539-4645
Open End Wrench

995394645
S99-2457: RNCC: 3 | RNVC: 2
99-2457: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-101-0793
Socket H Wrench Key

991010793
NO PRIMARY REF 99-101-0793: RNCC: 3 | RNVC: 2
A29184: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-666-6523
Bearing And Bushing Remover

996666523
S14-94-2870 99/2: RNCC: 3 | RNVC: 2

11 Apr 2006

5120-99-902-4627
C Clamp

999024627
GCLS-001-01: RNCC: 3 | RNVC: 2

18 May 2009

5120-99-462-9655

5120-99-561-4508

5120-99-130-1411

5120-99-470-6828
Adjusting Pliers

5120-99-530-3838
Torque Wrench Adapter

995303838
KU.12927: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-719-1455
Thread Cleaner

997191455
NTS14868: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-468-4366
Spanner Wrench

994684366
AE0713: RNCC: 3 | RNVC: 2
27M11963: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-204-8407
Hydraulic J Tumbler

992048407
116720B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-865-9132
Final Drive Assembly Alignment Pin

998659132
70-99-914: RNCC: 3 | RNVC: 2

7 Sep 2007

5120-99-136-1098
Socket Wrench

991361098
558/2/02375/000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-6215
Retaining Ri Pliers

991226215
EXTERNALMINISTRAIGHT1-4IN: RNCC: 3 | RNVC: 2
MINI-1/4": RNCC: 5 | RNVC: 2
1B5880: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-537-6915
Hand Terminal Crimping Tool

995376915
29020: RNCC: 3 | RNVC: 2
451716: RNCC: 5 | RNVC: 2
451716-ENV: RNCC: 5 | RNVC: 2
HT29020: RNCC: 6 | RNVC: 9
FH954M50011: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-020-6244
Seal Inserter

990206244
LC 383-7: RNCC: 3 | RNVC: 2
LC 383-7/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-423-8257
Gland N Pin Spanner

994238257
NO PRIMARY REF 99-423-8257: RNCC: 3 | RNVC: 2
9032-47: RNCC: 5 | RNVC: 2
558848: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-629-6251
Spanner Wrench

5120-99-002-3186
Tap Extractor

5120-99-417-3263

5120-99-200-8466

5120-99-632-4547

5120-99-631-1415
Open End Wrench

5120-99-120-3935

5120-99-256-0794

5120-99-027-0969
Slide Hammer

5120-99-120-3673

5120-99-257-4934
Cap Key

5120-99-573-5641
Seal Inserter

995735641
K4P438A0002: RNCC: 3 | RNVC: 2

17 Nov 1997

5120-99-749-7901
Socket Wrench Extension

997497901
01T-C-11554: RNCC: 3 | RNVC: 2
01TC11554: RNCC: 5 | RNVC: 2
01T-C-11554: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-3954
Extractor

996543954
460009153B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-402-0518
Rea Remover Adaptor

994020518
NO PRIMARY REF 99-402-0518: RNCC: 3 | RNVC: 2
P1021: RNCC: 5 | RNVC: 2
16C6519: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-543-3147
Round Nose Pliers

995433147
NO PRIMARY REF 99-543-3147: RNCC: 3 | RNVC: 2
PA147-5: RNCC: 5 | RNVC: 9
21-2250-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-977-2448
Socket Head Screw Key

999772448
M2568-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-6970
Socket Wrench Handle

997106970
W43: RNCC: 3 | RNVC: 2
AK722: RNCC: 5 | RNVC: 2
18Q937: RNCC: 6 | RNVC: 9
64SY25: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-631-1784
Mechanical Puller

996311784
MVEE35722A3: RNCC: 3 | RNVC: 2
NTS15014: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-775-2513

5120-99-756-0111

5120-99-548-0606
Piston Ring Compressor

995480606
MS1447: RNCC: 3 | RNVC: 2
965-183028: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-3073
Sleeve Holding Tool

991503073
NO PRIMARY REF 99-150-3073: RNCC: 3 | RNVC: 2
AM25067: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-392-7593
Pipe Wrench

993927593
TP938999: RNCC: 3 | RNVC: 2
7992: RNCC: 5 | RNVC: 1
DC IPT/DLOCV/CM1/2/130: RNCC: 6 | RNVC: 9

4 Nov 2002

5120-99-797-5261
Trim Tool Set

5120-99-887-9818
Socket Wrench Socket

998879818
331/33696: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-614-8663
Torque Load Adaptor

5120-99-458-0058
Bearing Instal Tool

994580058
EA3205G028-125: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-99-962-8519
Breech Nut Spanner

999628519
NO PRIMARY REF 99-962-8519: RNCC: 3 | RNVC: 2
SUBGUNPT24: RNCC: 5 | RNVC: 2
411077: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-430-9428
Grub Screw Key

994309428
NO PRIMARY REF 99-430-9428: RNCC: 3 | RNVC: 2
DWS3672F: RNCC: 5 | RNVC: 2
88300-305-371: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-366-6058
Box Wrench

993666058
NO PRIMARY REF 99-366-6058: RNCC: 3 | RNVC: 2
KEN-582-1690K: RNCC: 5 | RNVC: 2
KEN-582-1690K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-968-4450
Torque Wrench Adapter

999684450
FV2260420: RNCC: 3 | RNVC: 2
052XF-022: RNCC: 6 | RNVC: 9

22 Aug 2005

5120-99-577-2319
Spanner Wrench

995772319
T21942: RNCC: 3 | RNVC: 2

11 Jul 2007

5120-99-609-2678

5120-99-315-2232
Clamp Base Bench Vise

993152232
NO PRIMARY REF 99-315-2232: RNCC: 3 | RNVC: 2
146830: RNCC: 5 | RNVC: 2

29 Apr 2010

5120-99-608-3993
Brass Assembly Tool

996083993
S108-1: RNCC: 3 | RNVC: 2

11 Jun 2002

5120-99-945-0234
Box Wrench

999450234
RES228: RNCC: 3 | RNVC: 2
530: RNCC: 5 | RNVC: 2
ERADB82278-2: RNCC: 5 | RNVC: 2
ERADB82278-2: RNCC: 5 | RNVC: 2
H577-704237: RNCC: 6 | RNVC: 9
10AG880: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-766-9616
Open End Wrench

997669616
2JM1819: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-99-120-9535
Extens Ring Spanner

991209535
1209535: RNCC: 3 | RNVC: 2
1704323: RNCC: 5 | RNVC: 2
T2EN6872: RNCC: 5 | RNVC: 2
1L1209535: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-783-0726
Scriber

997830726
E229: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-000-6029
Open End Box Wrench

990006029
S3S14536000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-611-8058
Mechanical Puller

996118058
PE16117: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-197-5811

5120-99-448-7073
Spanner

5120-99-148-8014

5120-99-548-4762
Peg Spanner Adaptor

995484762
NO PRIMARY REF 99-548-4762: RNCC: 3 | RNVC: 2
UX10516A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-657-4081
Lamp Extractor

996574081
3854-36923: RNCC: 3 | RNVC: 2
A3854-36923: RNCC: 5 | RNVC: 2
6C6574081: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-799-8037
Pliers

997998037
732-779: RNCC: 3 | RNVC: 2
302-041883: RNCC: 5 | RNVC: 2

31 Jul 2003

5120-99-750-7894
Screwdriver Bit

997507894
440-TX06: RNCC: 3 | RNVC: 2
440-TX06: RNCC: 5 | RNVC: 2
440-TX-06: RNCC: 6 | RNVC: 9
1C/8627: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-542-1539
Spanner Wrench

995421539
B58/48400: RNCC: 3 | RNVC: 2
560-922944: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-4850
Torque Wrench

991374850
T0RQUELEADERMAJ0RLTB: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 4 | RNVC: 1
T0RQUELEADERMAJ0R: RNCC: 5 | RNVC: 1
TD.148683: RNCC: 5 | RNVC: 2
H517365 8410: RNCC: 5 | RNVC: 2

21 Apr 1987

5120-99-423-4589
Pin Spanner

994234589
NO PRIMARY REF 99-423-4589: RNCC: 3 | RNVC: 2
9032-129: RNCC: 5 | RNVC: 2
558496: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-138-9926
Adaptor Torque Wren

991389926
S0E1-1-16: RNCC: 3 | RNVC: 2
S0E1-1-16: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-921-6832
Torque Wrench

999216832
A37251: RNCC: 3 | RNVC: 2
TBN2 & 8MM O/E-MOD: RNCC: 5 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

26 Oct 2009

5120-99-910-5549
Solid Center Punch

999105549
DL-9-A-H1874: RNCC: 2 | RNVC: 2
CENTREPUNCH51NX1-21N: RNCC: 3 | RNVC: 2
DL-9-A: RNCC: 5 | RNVC: 2
H1874: RNCC: 6 | RNVC: 9
FA15931: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-869-3223
Nut Spinner

998693223
BS4006-TABLE 4 6MM: RNCC: 4 | RNVC: 1
TABLE 4: RNCC: 6 | RNVC: 9

25 May 1995

5120-99-748-0024
Mechanical Puller

997480024
P-891145-405: RNCC: 3 | RNVC: 2
P891145-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-580-5408
Screw Thread Insert Inserter

995805408
A31-3: RNCC: 3 | RNVC: 2
H21468: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-519-6436
Socket Wrench Handle Bar

995196436
NO PRIMARY REF 99-519-6436: RNCC: 3 | RNVC: 2
TA1011: RNCC: 5 | RNVC: 2
5815-99N31-2884: RNCC: 6 | RNVC: 9
0276-22245: RNCC: 6 | RNVC: 9
AP22245: RNCC: 6 | RNVC: 9
10G419: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-568-5750
Open End Wrench

995685750
LRT-12-094: RNCC: 3 | RNVC: 2

18 Aug 1995

5120-99-225-8532
Detector Removal To

992258532
SOLO 200: RNCC: 3 | RNVC: 2
201-3121: RNCC: 5 | RNVC: 2

17 Nov 2003

5120-99-355-4733
Spanner Wrench

993554733
TA30086: RNCC: 3 | RNVC: 2

27 Oct 2010

5120-99-666-8123
Torque Screwdriver

996668123
015903: RNCC: 3 | RNVC: 1
TLS1360 SD ESD: RNCC: 5 | RNVC: 1

8 Feb 2007

5120-99-292-8530
Torque Reactor

992928530
DRT68137: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-99-763-1106
Swivel Screwdriver

5120-99-765-6374
Socket Wrenc Socket

5120-99-719-3178

5120-99-735-1587

5120-99-783-6584
Tool Seat Insertion

997836584
K18749: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-764-0061
Holder

997640061
CH755-051: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-456-2063
Screw Extractor

994562063
F1FA13183: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13183: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-908-2198
Socket Wrench

999082198
T4734M 025: RNCC: 3 | RNVC: 2
4734M: RNCC: 5 | RNVC: 1
281-633: RNCC: 5 | RNVC: 2

8 Oct 1999

5120-99-828-5128
Cylinder Liner Remo

998285128
NO PRIMARY REF 99-828-5128: RNCC: 3 | RNVC: 2
18G227C: RNCC: 5 | RNVC: 9

19 Oct 1989

5120-99-652-1834
Pcb Extractor Tool

996521834
NO PRIMARY REF 99-652-1834: RNCC: 3 | RNVC: 2
SD3-262988: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-957-5597
Spanner Wrench

999575597
452-65236-110: RNCC: 3 | RNVC: 2
FV2206261: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

20 Aug 1997

5120-99-747-3663
Swage Head

997473663
D12916-56: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-779-1683
Universal Hand Tool

997791683
UT910596A-M12: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-641-2805
Inserter And Extrac

996412805
WG1388-0953-101: RNCC: 3 | RNVC: 2
BLD25961NST: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-8867
Cubby Unit

997848867
6019-0012: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-3877
Mechanical Puller

996553877
CHA1072-041-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-923-1191

5120-99-776-3362

5120-99-654-4082
Mechanical Puller

996544082
460009350C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-536-9727
Open End Wrench

995369727
TZ.499 222: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-657-6354
Retractor Assembly

996576354
EA6205G556-041: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-957-6872
Socket Wrench Socket

999576872
STMMD5.5LOCK-ON: RNCC: 3 | RNVC: 2
STMMD5.5LOCK-ON: RNCC: 6 | RNVC: 9
XP98PC01260: RNCC: 6 | RNVC: 9

27 Mar 1998

5120-99-605-8867
Screwdriver

996058867
NO PRIMARY REF 99-605-8867: RNCC: 3 | RNVC: 2
944-9618: RNCC: 5 | RNVC: 2
9350-5401: RNCC: 5 | RNVC: 2

4 Dec 2002

5120-99-651-5890
Hel Extraction Tool

996515890
NO PRIMARY REF 99-651-5890: RNCC: 3 | RNVC: 2
PE57222: RNCC: 5 | RNVC: 2
85-690-0393: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-0419
Crimping To Locater

991300419
611096-1: RNCC: 3 | RNVC: 2
H20781: RNCC: 5 | RNVC: 2
1H409: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-151-0898
Bottom Removal Tool

991510898
PC20922: RNCC: 3 | RNVC: 2
PC20922: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-114-1945
Torque Spanner

991141945
NO PRIMARY REF 99-114-1945: RNCC: 3 | RNVC: 2
T502-031921-510: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-130-1756
Socket Wrench Screwdriver Attachment

991301756
LAW124A: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-719-1893
Torque Wrench

997191893
WB808-8UNC22LBFT024LBF: RNCC: 3 | RNVC: 2

28 Mar 1980

5120-99-829-0431
Sprin Servicing Set

998290431
CD61-1A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-0867
Pin Inserter

997600867
P-891168-405: RNCC: 3 | RNVC: 2
P891168-405: RNCC: 5 | RNVC: 2
BM-P-891168-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-946-0823
Cont Insertion Tool

999460823
NO PRIMARY REF 99-946-0823: RNCC: 3 | RNVC: 2
558-1-00587: RNCC: 5 | RNVC: 2
2CZ139041: RNCC: 5 | RNVC: 2
K678-912408: RNCC: 6 | RNVC: 9
1H232: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-449-0246
Open End Wrench

994490246
BS1842-TABLE 1 5 X 7BA: RNCC: 4 | RNVC: 1
5J1722: RNCC: 5 | RNVC: 2
H20248: RNCC: 5 | RNVC: 2
851752: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-8164
Mechanical Puller

998308164
W20037A01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-874-1716
Adaptorxremoverxrea

998741716
18G134K: RNCC: 3 | RNVC: 2
LV7ML18G134K: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-428-1701

5120-99-428-8907

5120-99-428-8896

5120-99-445-4055
Tyre Lever

994454055
NO PRIMARY REF 99-445-4055: RNCC: 3 | RNVC: 2
KSE153-5: RNCC: 5 | RNVC: 2
4A1305: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-4554
Wrench

996664554
616159: RNCC: 3 | RNVC: 2
M606D ITEM 1-12: RNCC: 5 | RNVC: 2
M606D/1-12: RNCC: 5 | RNVC: 2
012KL-035: RNCC: 6 | RNVC: 9

9 Oct 2001

5120-99-786-3492
Diagnostic Tool Sof

997863492
17229212-0: RNCC: 3 | RNVC: 2
J 43950-1000: RNCC: 5 | RNVC: 2
17229212-0: RNCC: 5 | RNVC: 2
021JB-016: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-481-9678
Socket Wrench Crowfoot Attachment

994819678
C60008307: RNCC: 3 | RNVC: 2
P2076-DG-208: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

26 Sep 2005

5120-99-127-5113
Socket Spanner Set

991275113
F1-5120-99-127-5113: RNCC: 3 | RNVC: 2
SCHEDULE S3025: RNCC: 5 | RNVC: 2
F1-5120-99-127-5113: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-783-1196
Seal Inserter

997831196
LC315: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-847-0622
Spanner Wrench

998470622
S03621: RNCC: 3 | RNVC: 2
P03621: RNCC: 5 | RNVC: 2

18 Jan 2010

5120-99-716-9088
Extension

997169088
NO PRIMARY REF 99-716-9088: RNCC: 3 | RNVC: 2
093119: RNCC: 5 | RNVC: 2
1060: RNCC: 5 | RNVC: 2
931E: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-8328
Socket Wrench Handle Bar

995588328
954061TEM8: RNCC: 3 | RNVC: 2
95406-8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-8418
Box Wrench

991228418
41-47-20-22: RNCC: 3 | RNVC: 2
41-47-20-22: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-748-5872
Mechanical Puller

997485872
48741 M8/405: RNCC: 3 | RNVC: 2
48741M8-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-120-2751
Open End Box Wrench

991202751
1949Z 1X1-1/8: RNCC: 3 | RNVC: 2
DEFSTAN51-11PART 2: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5810: RNCC: 6 | RNVC: 9
1C7065: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-113-7661
Tommy Bar Screw

991137661
PUT212-21: RNCC: 3 | RNVC: 2
26VC96146: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-848-2808

5120-99-844-8250

5120-99-833-4151

5120-99-863-7073
Extend Setting Tool

5120-99-341-4194
Nozzle Pack

993414194
MPO50NP: RNCC: 3 | RNVC: 2
010P60030: RNCC: 6 | RNVC: 9

18 Apr 2001

5120-99-663-8326
Lamp Remover

996638326
300-0002-00: RNCC: 3 | RNVC: 2
300-0002-00: RNCC: 5 | RNVC: 2
WE114A2: RNCC: 6 | RNVC: 9

28 Oct 1997

5120-99-434-1400
Seal Inserter And Remover

994341400
21-121: RNCC: 3 | RNVC: 2

28 May 1993

5120-99-189-2102
Mechanical Puller

991892102
50070-0200: RNCC: 3 | RNVC: 2

12 Jul 2002

5120-99-137-5736
Hand Terminal Crimping Tool

991375736
SK820-2: RNCC: 3 | RNVC: 2
1CT7: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-668-2433
Segment

996682433
201593001EFA-D17-2: RNCC: 3 | RNVC: 2

6 Dec 2011

5120-99-120-5623
Hand Blind Riveter

991205623
TT26 3-321NP0PAND1-81N1MEX: RNCC: 3 | RNVC: 1
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H5915: RNCC: 6 | RNVC: 9
H5915: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6061
Relie Assembly Post

991446061
460001617: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-251-2810
Drive Pin Punch

992512810
HU28401: RNCC: 3 | RNVC: 2
HU28401: RNCC: 5 | RNVC: 2

19 Jun 2002

5120-99-137-8525
Tri Win Screwdriver

991378525
SSTW66: RNCC: 3 | RNVC: 2
TWD2-6: RNCC: 3 | RNVC: 2
1C8351: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-154-5196

5120-99-495-9094
Hand Hydraulic Jack

994959094
616079: RNCC: 3 | RNVC: 2
M606D ITEM 2-19: RNCC: 5 | RNVC: 2
M606D/2-19: RNCC: 5 | RNVC: 2
012KL-044: RNCC: 6 | RNVC: 9

9 Oct 2001

5120-99-550-9725
Spanner Wrench

995509725
708SH1 ITEM 6: RNCC: 3 | RNVC: 2
708-1-6: RNCC: 5 | RNVC: 2
H896-249955: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-888-3047
Grinding In Handle

998883047
001285379: RNCC: 3 | RNVC: 2
Y/327/40/0402/173: RNCC: 5 | RNVC: 1
001285379 SHEET 001: RNCC: 5 | RNVC: 1
001285379/001: RNCC: 5 | RNVC: 1
Y/327/40/0402/173 SHEET 001: RNCC: 5 | RNVC: 1
Y/327/40/0402/173/001: RNCC: 5 | RNVC: 1
SSK/Y/327/40/0402/173/001: RNCC: 5 | RNVC: 2
SSK/Y/327/40/0402/173 SHEET 001: RNCC: 5 | RNVC: 2
SSK/Y/327/40/0402/173: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-520-2959
Spanner Wrench

995202959
85-25-19-10-1027: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-559-1833
Ring Spanner

995591833
5-79-65H: RNCC: 3 | RNVC: 2
H718-270408: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-215-1318
Hand Screw Jack

992151318
400/FIG.C/SL: RNCC: 3 | RNVC: 2
12031/C: RNCC: 5 | RNVC: 1
400 FIG C: RNCC: 5 | RNVC: 1
400/C: RNCC: 5 | RNVC: 1
12031: RNCC: 5 | RNVC: 1
400: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-715-9461
Spanner Wrench

997159461
S6172-35002-1: RNCC: 3 | RNVC: 2
S6172-35002: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-1818
Socket Wrench

996171818
HU.17443: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-7751
Spanner Wrench

996077751
PE 50748: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-215-3767
Offset Screwdriver

992153767
AH001: RNCC: 3 | RNVC: 2

16 Jun 1993

5120-99-337-1031
Socket Wrench

993371031
51123: RNCC: 3 | RNVC: 2
NCT3: RNCC: 5 | RNVC: 2
20200200: RNCC: 5 | RNVC: 2
FJ9473W0093: RNCC: 6 | RNVC: 9

10 Aug 1995

5120-99-414-1967

5120-99-847-6789

5120-99-735-7972
Open End Wrench

997357972
OPW 215: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-750-7504
Bearing And Bushing Driver

997507504
2067T015: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-297-6044
Reaction Member

992976044
SSK/Y/328/40/0402/152: RNCC: 3 | RNVC: 2
A1011002-A: RNCC: 5 | RNVC: 2

17 Jan 2001

5120-99-796-1459
Socket Spann Socket

997961459
15-514B: RNCC: 3 | RNVC: 2
LC322: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-427-4876
Ratchet Wrench

994274876
2: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-192-5491
Capstan Bar

991925491
710.1.55.221.1: RNCC: 3 | RNVC: 2
710.1.55.221.1: RNCC: 5 | RNVC: 2
710.1.55.221.1: RNCC: 5 | RNVC: 2

14 Sep 1994

5120-99-425-6204
Spanner

994256204
T402A: RNCC: 3 | RNVC: 2
88510-500-770: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-967-7009
Fi Open Jaw Spanner

999677009
0S102293: RNCC: 3 | RNVC: 2
SS20-A414: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-391-3070
Bearing Staking Installation Tool

993913070
T81-0005: RNCC: 3 | RNVC: 2

25 Apr 2012

5120-99-114-6696
Wire Pike

991146696
NO PRIMARY REF 99-114-6696: RNCC: 3 | RNVC: 2
SDB232375: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-729-3068
Removal Tool

997293068
NO PRIMARY REF 99-729-3068: RNCC: 3 | RNVC: 2
50201063: RNCC: 5 | RNVC: 2
O934-LWB021561: RNCC: 6 | RNVC: 9

10 Jul 2001

5120-99-759-9101
Keytop Remover

997599101
KRT1: RNCC: 3 | RNVC: 2
56810-299: RNCC: 5 | RNVC: 2
R06-1734: RNCC: 5 | RNVC: 2

28 Oct 1986

5120-99-202-0542
Mechanical Puller

5120-99-610-2593

5120-99-738-7102
Gaiter Seal

997387102
W133390: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2190
Location Base

997312190
FV2090371: RNCC: 3 | RNVC: 2
AT61424: RNCC: 5 | RNVC: 2

9 May 1986

5120-99-769-5228
Clutch In Protector

997695228
J21362: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-830-9506
Water Overhaul Kit

998309506
MF200-26A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-4956
Stud Inserter

997104956
PE8721: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-256-0385
Vehicul Track Clamp

992560385
FV 2109552: RNCC: 3 | RNVC: 2

5 Jan 1990

5120-99-205-8277
Pump Fulcrum Spigot

992058277
GMB54512: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-230-7899
Socket Wrench Adapter

992307899
70001350: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

10 Sep 2008

5120-99-562-0365
Mini Extractor Tool

995620365
A1473368: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-614-9256
Extractor

996149256
A0113971: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-490-4464
Socket Wrench Spanner Attachment

994904464
T2CJ4952: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-99-521-8675
Open End Wrench

995218675
9031-24: RNCC: 3 | RNVC: 2
SR558990: RNCC: 6 | RNVC: 9
ST40: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-320-1233
Ball-Ended Driver

993201233
FEC 281-580: RNCC: 3 | RNVC: 2

4 Jun 2004

5120-99-052-0358
Pilot

990520358
AO2G1059-52: RNCC: 3 | RNVC: 2

23 Aug 1996

5120-99-608-7544
Spanner Wrench

996087544
E30860: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-514-9316
Spanner Wrench

995149316
FV3028242: RNCC: 3 | RNVC: 2
FH000R40007: RNCC: 6 | RNVC: 9

17 Apr 2000

5120-99-610-5156

5120-99-459-0625
Wheel Adaptor

994590625
HW17290: RNCC: 3 | RNVC: 2
64VV1885: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-775-2508
Inj Puller Assembly

997752508
393201: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-737-2665
Seal Inserter

997372665
3114474C1: RNCC: 3 | RNVC: 2
553933: RNCC: 5 | RNVC: 2
ZTSE4983MIL: RNCC: 5 | RNVC: 2

7 Oct 2009

5120-99-580-5271
Screw Thread Insert Tang Breakoff Tool

995805271
1195-04: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-864-5131
Screwdriver

998645131
NO PRIMARY REF 99-864-5131: RNCC: 3 | RNVC: 2
RSK-1646-05102: RNCC: 5 | RNVC: 2
400012219A: RNCC: 5 | RNVC: 2

9 Aug 2005

5120-99-264-0435
Override Assemb Pin

992640435
EA6705G569-105: RNCC: 3 | RNVC: 2
1MEVGEP: RNCC: 6 | RNVC: 9

10 Apr 2004

5120-99-430-5590
Extractor

994305590
NO PRIMARY REF 99-430-5590: RNCC: 3 | RNVC: 2
Z8510: RNCC: 5 | RNVC: 2
16C6860: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-445-2259

5120-99-851-8002

5120-99-529-8683
Wire R Swaging Tool

995298683
3094: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-560-9005
Ratchet Wrench

995609005
5: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-130-1879
Crimping To Locator

991301879
611189-1: RNCC: 3 | RNVC: 2
1H459: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-6530
Magnetic Retrieving Tool

991226530
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H6531: RNCC: 6 | RNVC: 9
H6531: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-4546
Face Spanner Wrench Socket

996594546
OIT-C-11001: RNCC: 3 | RNVC: 2
01TC11001: RNCC: 6 | RNVC: 9
01TC11001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-363-9796
Spanner Wrench

993639796
SST/Y/581/00/0307/104: RNCC: 3 | RNVC: 2
001293839: RNCC: 5 | RNVC: 1
SST/Y/581/00/0307/000 PART 104: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-119-2041
Communications Equipment Spring Adjuster

991192041
CN2025: RNCC: 3 | RNVC: 2
95-23149: RNCC: 3 | RNVC: 2
ADJUSTERSPR1NG2: RNCC: 5 | RNVC: 2
A95-23149: RNCC: 5 | RNVC: 2
56978-0029: RNCC: 5 | RNVC: 2
N8237: RNCC: 5 | RNVC: 2
0029-56978: RNCC: 5 | RNVC: 2
56978-0029: RNCC: 5 | RNVC: 2
363-363315: RNCC: 6 | RNVC: 9
1H52: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-5421
Cylinder Li Adaptor

998305421
PD 150B-17: RNCC: 3 | RNVC: 2
PD 150B-17A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-402-0577
Ball Join Extractor

994020577
3311-10: RNCC: 3 | RNVC: 2
3311: RNCC: 5 | RNVC: 1
16C2349: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-1858
Socket Wrench Socket

991391858
PALMERA 252-340: RNCC: 3 | RNVC: 2
SFM10: RNCC: 5 | RNVC: 9
FCFCFGCFCHGCFHG: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-9877
Bli Riveter Mandrel

991209877
NO PRIMARY REF 99-120-9877: RNCC: 3 | RNVC: 2
13G11: RNCC: 5 | RNVC: 2
7161-6005: RNCC: 5 | RNVC: 2
1C5848: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-8403
Torque Wrench Adapter

991358403
SFN15: RNCC: 3 | RNVC: 2
SFN15: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-356-4647
Torque Wrench Adapter

993564647
954.18539: RNCC: 3 | RNVC: 2
WE123A1: RNCC: 6 | RNVC: 9

12 Mar 1997

5120-99-530-5809
Spanner Wrench

995305809
37996: RNCC: 3 | RNVC: 2
511100-1: RNCC: 5 | RNVC: 2
106-203083: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-250-1749
Intr Inspection Kit

992501749
L3C60107: RNCC: 3 | RNVC: 2

1 Sep 2006

5120-99-136-1931
Socket Wrench

991361931
AML40123: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-962-1353
Open End Wrench

999621353
RGF11283-120: RNCC: 3 | RNVC: 1
M4MC1600: RNCC: 6 | RNVC: 9
257689: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-700-7662
Box Wrench

997007662
353-7026-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-820-6918
Disc Brake Pis Tool

998206918
NO PRIMARY REF 99-820-6918: RNCC: 3 | RNVC: 2
18G672: RNCC: 5 | RNVC: 2

20 Nov 1986

5120-99-826-2732
Mandrel Special De

998262732
NO PRIMARY REF 99-826-2732: RNCC: 3 | RNVC: 2
0324-4F1G3: RNCC: 5 | RNVC: 2

22 Dec 1980

5120-99-122-5144
Socket Spanner Tip

991225144
FA5A2: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 5 | RNVC: 1
1L538: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-346-9147
Chisel

993469147
NO PRIMARY REF 99-346-9147: RNCC: 3 | RNVC: 2
NUK0220269T046: RNCC: 5 | RNVC: 2
O938-LWW013541: RNCC: 6 | RNVC: 9

17 Jul 2001

5120-99-330-0701

5120-99-376-4809

5120-99-761-5942
Outer Guide

997615942
CP14285: RNCC: 3 | RNVC: 2
114831ST: RNCC: 5 | RNVC: 2
FV1048074: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-958-0276
Insertion Tool

999580276
110079SHT2821: RNCC: 3 | RNVC: 2
26VC-95688: RNCC: 6 | RNVC: 9

6 Oct 2004

5120-99-862-2633
Tool Nipple Assembl

998622633
320185579201: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-846-6377
Seal Inserter

998466377
MC1248771: RNCC: 3 | RNVC: 2

31 Jan 2011

5120-99-770-6481
Torque Wrench Adapter

997706481
29903: RNCC: 3 | RNVC: 2

25 Aug 2005

5120-99-887-6470
Hydraul Service Kit

998876470
122059: RNCC: 3 | RNVC: 2

27 Feb 1992

5120-99-764-6305
Packing Retainer To

997646305
23957: RNCC: 3 | RNVC: 2
23957C: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-762-3331
Gearbox Adj Bracket

997623331
002354: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-770-6142
Limiter

997706142
00863000: RNCC: 3 | RNVC: 2

13 Aug 1999

5120-99-761-5885
Circlip Remova Tool

997615885
1631LMT: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-855-1308
Bearing And Bushing Inserter

998551308
CBD10335G01: RNCC: 3 | RNVC: 2

6 Apr 2001

5120-99-126-5127
Bar

991265127
EB001238: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-659-6928
Bearing And Bushing Driver

996596928
T4243-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-422-5732
Socket Wrench

994225732
N0D2107-90 ITEM 1: RNCC: 3 | RNVC: 2
N21-1: RNCC: 5 | RNVC: 2
121451: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-371-9002
Lifting Bar

993719002
21825816: RNCC: 3 | RNVC: 2
GA13: RNCC: 5 | RNVC: 9
729-719002: RNCC: 6 | RNVC: 9
18Q944: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-6722
Socket Head Screw Key

997606722
3613-A12-405: RNCC: 3 | RNVC: 2
3613A12-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-891-9898
Crimping Tool Die

998919898
30206: RNCC: 3 | RNVC: 2
DEF STAN 59-71: RNCC: 4 | RNVC: 1
DEF STAN 59-71 ISSUE 1: RNCC: 6 | RNVC: 9
DEF STAN 59-59: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-532-6022
Socket Wrench

995326022
C83464/1/2: RNCC: 3 | RNVC: 2
737-442927: RNCC: 6 | RNVC: 9
C83464: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-075-1846
Shear Screw Re Tool

990751846
3201-10803-20-2: RNCC: 3 | RNVC: 2
3201-10803-20-2-01: RNCC: 5 | RNVC: 2
A833-88-3002282: RNCC: 6 | RNVC: 9

15 May 1990

5120-99-209-8427
Nipple Forming Kit

992098427
99-86: RNCC: 3 | RNVC: 2
99-86-A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-254-4361
Flexible Extension

992544361
7162-2700: RNCC: 3 | RNVC: 2
1C-8725: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-545-4128
Torque Wrench

995454128
SLO/TH-A: RNCC: 3 | RNVC: 2
023400: RNCC: 5 | RNVC: 2
9646-592: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-870-6489
Face Spanner Wrench Socket

998706489
6-4Y-905A: RNCC: 3 | RNVC: 2
64Y905A: RNCC: 5 | RNVC: 2
26DL95575: RNCC: 6 | RNVC: 9

19 May 1994

5120-99-855-1295
Setting Adaptor

998551295
P-892414-007: RNCC: 3 | RNVC: 2
P892414-007: RNCC: 5 | RNVC: 2

18 Jan 2001

5120-99-944-1472
Spanner Wrench

999441472
2Z138874-14: RNCC: 3 | RNVC: 2
BKB2543-3: RNCC: 5 | RNVC: 2
2CZ138874-14: RNCC: 5 | RNVC: 2
558-2-00577-012: RNCC: 5 | RNVC: 2
1H236: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-744-1418
Actuator Co Adaptor

5120-99-615-4629
Torque Wrench Adapter

996154629
ZJEF005553SST-ITEM-035: RNCC: 3 | RNVC: 2
ZJEF005553SST/035: RNCC: 5 | RNVC: 2

27 Feb 2002

5120-99-139-7791
Socket Head Screw Key

991397791
100182-0000-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-3024
Press Dolly

997693024
CP13491-2: RNCC: 3 | RNVC: 2
FV1048071-2: RNCC: 5 | RNVC: 2
113987ST: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-148-0902
Flat Tip Screwdriver

991480902
T-69217: RNCC: 3 | RNVC: 2
T-69217: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-315-8768
Leveling-Support Jack

993158768
EU0905G051-065: RNCC: 3 | RNVC: 2

31 Jul 2013

5120-99-421-8298

5120-99-773-6905
Bear Driving Sleeve

997736905
65379: RNCC: 3 | RNVC: 2
311130: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-643-3680
Unwrapping Tool Ter

996433680
MWH5: RNCC: 3 | RNVC: 2
B4130-21209: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-5780

5120-99-124-3942

5120-99-553-5243
Torque Wrench

995535243
TWH54NRH80SP: RNCC: 3 | RNVC: 2

15 Dec 2011

5120-99-640-0127
Socket Wrench Handle

996400127
CH49904: RNCC: 3 | RNVC: 2
67A124: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-195-5312
Screw Driver Right

991955312
BRL4159J: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-847-0486
Installation Mandre

998470486
P39339: RNCC: 3 | RNVC: 2
ITEL/3413/0290: RNCC: 5 | RNVC: 2
082T9-056: RNCC: 6 | RNVC: 9

26 Mar 2008

5120-99-096-3590
Wheel Nut Wrench

990963590
76-00011-000: RNCC: 3 | RNVC: 2
76-00011: RNCC: 5 | RNVC: 1
S1004303: RNCC: 6 | RNVC: 9

14 Jul 1994

5120-99-953-8872

5120-99-120-0965

5120-99-455-9602
Combination Box And Open End Wrench

994559602
NO PRIMARY REF 99-455-9602: RNCC: 3 | RNVC: 2
495-3510: RNCC: 5 | RNVC: 2

8 Feb 2011

5120-99-923-8162
Screwdriver Bit

999238162
HSD216: RNCC: 3 | RNVC: 2
0277-12629: RNCC: 6 | RNVC: 9
0277-923-8162: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-194-3964

5120-99-737-5225
Wrench Spanner

997375225
U46: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-730-7862
Open End Wrench

997307862
D321: RNCC: 3 | RNVC: 2
3AP5136: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-811-6814
Open End Wrench

998116814
39683T: RNCC: 3 | RNVC: 2
LV1VSM39683T: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-737-3426
Protection Tool

997373426
YN74948: RNCC: 3 | RNVC: 2

13 Oct 2010

5120-99-462-6604
Bench Spanner

994626604
AML16649: RNCC: 3 | RNVC: 2

21 May 1997

5120-99-466-1082
Socket Wrench Handle

994661082
BS4006-TABLE 26 25MM: RNCC: 4 | RNVC: 1
OD17845P3P4: RNCC: 5 | RNVC: 2
OD17845P4: RNCC: 5 | RNVC: 2
G70: RNCC: 5 | RNVC: 2
181902C: RNCC: 6 | RNVC: 9
G70: RNCC: 6 | RNVC: 9
1C9103: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-219-2776
Hand Socket

992192776
CHA729-776: RNCC: 3 | RNVC: 2

7 Jun 1994

5120-99-738-4742
Extractor Ring

997384742
EA6305G604-109: RNCC: 3 | RNVC: 2

14 Mar 2004

5120-99-523-9157
Socket Wrench Handle Bar

995239157
ARLB4777-13B: RNCC: 3 | RNVC: 2
0552-2814: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9011
Extractor

994119011
NO PRIMARY REF 99-411-9011: RNCC: 3 | RNVC: 2
ST2860: RNCC: 5 | RNVC: 9
27Q17554: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-869-3602
Nut Spinner Handle

998693602
5490-06-HANDLE: RNCC: 3 | RNVC: 2

15 Aug 1995

5120-99-120-9479

5120-99-120-9847

5120-99-120-2687

5120-99-120-9054
Rivet Nose Assembly

5120-99-776-3510
Spanner Wrench

5120-99-780-2374

5120-99-824-3596

5120-99-773-7781

5120-99-758-6036
Socket Head Scr Key

5120-99-120-4745

5120-99-120-4731

5120-99-120-4728

5120-99-556-8261
Socket Wrench

995568261
C1695: RNCC: 3 | RNVC: 2
A4874C1695: RNCC: 5 | RNVC: 2
190-075783: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-133-6262
Retaining Ring Pliers Set

991336262
NO PRIMARY REF 99-133-6262: RNCC: 3 | RNVC: 2
269-4332: RNCC: 5 | RNVC: 2
3803: RNCC: 5 | RNVC: 2
053YA-0012: RNCC: 6 | RNVC: 9

23 Nov 2005

5120-99-135-6339
Splicing Sleeve Compressing Tool

991356339
2450-0278-011: RNCC: 3 | RNVC: 2
2450-0278-011: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-137-4393
Cocking Tool

991374393
NO PRIMARY REF 99-137-4393: RNCC: 3 | RNVC: 2
AATDCA3-4398: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-790-2314
Hand Screw Jack

997902314
CP30088/2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-224-6761
Snap Locating Tool

992246761
373357: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-1042
Socket Wrench Crowfoot Attachment

997601042
T10103-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-1081
Open End Wrench

997601081
T10075-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-146-0058
Mechanical Puller

991460058
S6170-70160-041: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-433-4537
Fuse Extractor

994334537
NO PRIMARY REF 99-433-4537: RNCC: 3 | RNVC: 2
EEM750: RNCC: 5 | RNVC: 2
0275-19237: RNCC: 6 | RNVC: 9

4 Apr 1989

5120-99-871-6042
Spanner

998716042
NO PRIMARY REF 99-871-6042: RNCC: 3 | RNVC: 2
SA321-95-0026-00: RNCC: 5 | RNVC: 2
26MM95490: RNCC: 6 | RNVC: 9

26 Sep 2002

5120-99-423-5129
Engine Valve Seat Insert Knockout Tool

994235129
A0904H0423-14: RNCC: 3 | RNVC: 2

31 Aug 2011

5120-99-411-9070
Assembly Tool

994119070
NO PRIMARY REF 99-411-9070: RNCC: 3 | RNVC: 2
ST1043: RNCC: 5 | RNVC: 9
27Q10392: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-124-1010
Electrical Contact Remover

991241010
M15515-20: RNCC: 3 | RNVC: 2
H21244: RNCC: 5 | RNVC: 2
1H390: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-052-3358

5120-99-004-0720
Test Clip

990040720
XM1BLACK: RNCC: 3 | RNVC: 2

6 Mar 1992

5120-99-428-7621
Hammer Handle Wedge

994287621
DEF STAN 51-11(PART 31): RNCC: 4 | RNVC: 1
F1FA14437: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-612-7021
Pipe Co Spanner Set

996127021
NO PRIMARY REF 99-612-7021: RNCC: 3 | RNVC: 2
HTE2900: RNCC: 5 | RNVC: 2

26 Jan 1981

5120-99-470-4559
Spanner

994704559
NO PRIMARY REF 99-470-4559: RNCC: 3 | RNVC: 2
AE0802: RNCC: 5 | RNVC: 2
27M11969: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-241-6303
Seal Assembly Tool

992416303
3203T000-001: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-99-436-0420
Special Spanner

994360420
NO PRIMARY REF 99-436-0420: RNCC: 3 | RNVC: 2
NTS10180: RNCC: 5 | RNVC: 2
5UA9358: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-537-0008

5120-99-455-9927

5120-99-456-0830

5120-99-924-5830
Screw Thread Insert Inserter

999245830
535-20: RNCC: 3 | RNVC: 2
85-25-19-10-1746: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9967
Sock Wrench Key Bit

991209967
A33-156: RNCC: 3 | RNVC: 2

20 Oct 1978

5120-99-256-6788
End Plug

992566788
80 461-02100-405: RNCC: 3 | RNVC: 2
461-02100-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-139-5673
Torque Wrench

991395673
QS45: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-257-9036
Spanner Wrench

5120-99-101-1566

5120-99-124-0994

5120-99-051-8194
Shaft Nut Tool

5120-99-122-1823

5120-99-719-2177
Stave Bearing

997192177
90537: RNCC: 3 | RNVC: 2

10 Jun 1980

5120-99-714-3423
Ha Riveter Cone Tip

997143423
7140-2104: RNCC: 3 | RNVC: 2
17G14-1: RNCC: 5 | RNVC: 2
7140-2104: RNCC: 5 | RNVC: 2
17G14-1: RNCC: 5 | RNVC: 2
7140-2104: RNCC: 5 | RNVC: 9
1C7021: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-983-1672
Socket Wrench Extension

999831672
CEDC/224/120: RNCC: 3 | RNVC: 2

5 Jul 2012

5120-99-711-1578
Socket Head Screw Key

997111578
NMT-190: RNCC: 3 | RNVC: 2

27 Nov 1998

5120-99-973-9210
Pad Wear Adjus Tool

999739210
331/33442: RNCC: 3 | RNVC: 2
031F6-012: RNCC: 6 | RNVC: 9

31 Mar 2003

5120-99-990-0575
Hand Blind Riveter

999900575
7165-3501: RNCC: 3 | RNVC: 2

21 Sep 2011

5120-99-498-9321
Piston Ring Expander

994989321
91754710: RNCC: 3 | RNVC: 2
020170 R1 AS11014: RNCC: 5 | RNVC: 2

11 Jun 2010

5120-99-388-8158
Connector

993888158
EA6505G502-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-527-2039
Spanner Wrench

995272039
11-454-19-10-1007: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-454-7341
Socket Wrench Handle Bar

994547341
MDSK855-3: RNCC: 3 | RNVC: 2
719512: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-510-3829
Aligning Punch

995103829
MBEU171827: RNCC: 3 | RNVC: 2
991MQ-135: RNCC: 5 | RNVC: 2
MBEU171827: RNCC: 5 | RNVC: 2
BMBEU171827: RNCC: 5 | RNVC: 2
XA991MQ0135: RNCC: 6 | RNVC: 9

7 Sep 1999

5120-99-828-6742
Valve Guide Punch

998286742
NO PRIMARY REF 99-828-6742: RNCC: 3 | RNVC: 2
3375: RNCC: 5 | RNVC: 2
Z8378: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-797-8710
Drift

5120-99-138-2895
Socket Wrench Socket

991382895
F241: RNCC: 3 | RNVC: 2
F241: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-812-4083
Serrated Ti Spanner

998124083
NO PRIMARY REF 99-812-4083: RNCC: 3 | RNVC: 2
ME18794: RNCC: 5 | RNVC: 2
LV3RRME18794: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-722-4635
Spanner Wrench

997224635
7609-44: RNCC: 3 | RNVC: 2
FF952LN0002: RNCC: 6 | RNVC: 9

29 Sep 1995

5120-99-710-7633
Socket Spanner

997107633
NO PRIMARY REF 99-710-7633: RNCC: 3 | RNVC: 2
RT20899: RNCC: 5 | RNVC: 2
KU12804A: RNCC: 5 | RNVC: 2
64TN16: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-446-7329
Peg Spanner

994467329
NO PRIMARY REF 99-446-7329: RNCC: 3 | RNVC: 2
UL8936: RNCC: 5 | RNVC: 2
88634-617-343: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-8264
Piv Nut Pin Spanner

994238264
NO PRIMARY REF 99-423-8264: RNCC: 3 | RNVC: 2
9032-56: RNCC: 5 | RNVC: 2
558978: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-769-3007
Annulus Press Dolly

997693007
CP13491/3: RNCC: 3 | RNVC: 2
113988ST: RNCC: 5 | RNVC: 2
FV1048O71/3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-433-4616
Ratchet Wrench

994334616
VB106613A1-3-4: RNCC: 3 | RNVC: 2
0277-258: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-156-3583
Ring Gear Puller

991563583
145G0079-11: RNCC: 3 | RNVC: 2

14 Mar 1996

5120-99-134-7837
Nut Driver

991347837
FEC 281-670: RNCC: 3 | RNVC: 2

4 Jun 2004

5120-99-546-3945
Socket Wrench

995463945
FC100: RNCC: 3 | RNVC: 2
22900000: RNCC: 5 | RNVC: 2
TBS52: RNCC: 5 | RNVC: 2
TA20: RNCC: 6 | RNVC: 9
SW172A1A: RNCC: 6 | RNVC: 9
650-914943: RNCC: 6 | RNVC: 9
K650-914943: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-406-2505
Turnlock Fastener Clinching Punch

994062505
A3TOOL1: RNCC: 3 | RNVC: 2
28FP402: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-5100
Screwdriver Bit

991365100
11382: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-9068
Screwdriver Bit

991229068
H6743: RNCC: 2 | RNVC: 2
HTS5: RNCC: 3 | RNVC: 2
HTS5: RNCC: 5 | RNVC: 2
HTS5: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-960-7563

5120-99-963-0261
Open End Wrench

5120-99-438-6107

5120-99-204-0727
Hydraulic Ja Handle

992040727
NO PRIMARY REF 99-204-0727: RNCC: 3 | RNVC: 2
NW20: RNCC: 5 | RNVC: 2
4Q3395: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-5646
Socket Wrench Extension

991225646
1225646: RNCC: 3 | RNVC: 2
KPS12: RNCC: 3 | RNVC: 2
BS4006-TABLE 28 12.50MM: RNCC: 4 | RNVC: 1
SXK11: RNCC: 5 | RNVC: 2
T2EC3322: RNCC: 5 | RNVC: 2
170052: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-8833
Wrench Key

997848833
CESNKCS-04-6/1 1.1.17.6: RNCC: 3 | RNVC: 2

12 Jul 1984

5120-99-551-5684
Socket Wrench

995515684
T.212: RNCC: 3 | RNVC: 2
T1212: RNCC: 5 | RNVC: 2

6 Feb 2008

5120-99-750-0243
Spanner

997500243
NO PRIMARY REF 99-750-0243: RNCC: 3 | RNVC: 2
55682: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-316-3673
Socket Head Screw Key Blade

993163673
027-152: RNCC: 3 | RNVC: 2
90/99-21BP: RNCC: 5 | RNVC: 2

31 Jan 1995

5120-99-829-4309
Retaining Ri Pliers

998294309
NO PRIMARY REF 99-829-4309: RNCC: 3 | RNVC: 2
AAU7812: RNCC: 5 | RNVC: 2

17 Aug 1983

5120-99-924-5859
Rubbe Hose Stripper

999245859
NO PRIMARY REF 99-924-5859: RNCC: 3 | RNVC: 2
MK3: RNCC: 5 | RNVC: 2
85-25-19-10-1789: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-9546
Coil Thread Nozzle

991229546
A30-7: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

10 Mar 1988

5120-99-551-6947
Socket Head Screw Key

995516947
AWBMCG1605: RNCC: 3 | RNVC: 2
091SD-001: RNCC: 6 | RNVC: 9

29 Apr 2009

5120-99-605-2911

Load More Results