What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 96 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 96 of 108

5120-99-052-0806

5120-99-051-1664
Wrench 'T`

5120-99-041-9152

5120-99-718-6873
Cup Adaptor

997186873
XSD1250: RNCC: 3 | RNVC: 2
4Q3287: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-382-6450
Ratch Extension Bar

993826450
FV 3024666: RNCC: 3 | RNVC: 2

22 Jul 1994

5120-99-910-5597
Blacksmith's Punch

999105597
DL-9-A-H1954: RNCC: 2 | RNVC: 2
DL-9-A: RNCC: 5 | RNVC: 2
H1954: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4343
Wrecking Bar

999104343
UKSC4576: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 28: RNCC: 5 | RNVC: 1
A3-9800: RNCC: 5 | RNVC: 1
600378: RNCC: 5 | RNVC: 2
1A523: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H133: RNCC: 6 | RNVC: 9
F1FA10143: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-5957
Socket Wrench Adapter-Extension

994715957
NO PRIMARY REF 99-471-5957: RNCC: 3 | RNVC: 2
KEN-582-6480K: RNCC: 5 | RNVC: 2
KEN-582-6480K: RNCC: 5 | RNVC: 2

5 Sep 2011

5120-99-819-4020
Nipple Forming Tool

998194020
99-80: RNCC: 3 | RNVC: 2
7144-701: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-5020
Socket Wrench Screwdriver Attachment

991365020
H6848: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
840-12-25: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-468-4552

5120-99-734-7390
Extraction Tool

5120-99-522-1594

5120-99-122-5676
Con Extraction Tool

991225676
NO PRIMARY REF 99-122-5676: RNCC: 3 | RNVC: 2
11-8675-22: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-700-1653
Socket Wrench Socket

997001653
FB193804: RNCC: 3 | RNVC: 2
AK50: RNCC: 5 | RNVC: 2
AK50: RNCC: 5 | RNVC: 2
AB445: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-4902
Spanner Wrench

997104902
PE.8705: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-7977
Screwdriver Bit

991227977
NO PRIMARY REF 99-122-7977: RNCC: 3 | RNVC: 2
852: RNCC: 5 | RNVC: 2
852: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-917-0944
Oil Seal Replacer

999170944
LC 550-31A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-830-7986
Assembly Tool

998307986
V3626-69: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-8661
Seal Guide

999108661
453 7785-068: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-429-5606
Box Wrench

994295606
NO PRIMARY REF 99-429-5606: RNCC: 3 | RNVC: 2
KEN-582-1710K: RNCC: 5 | RNVC: 2
KEN-582-1710K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-847-6791

5120-99-787-5521
Crankshaft Replacer

5120-99-221-0721
Extraction Tool

992210721
RX8-1: RNCC: 3 | RNVC: 2
BKB504606: RNCC: 5 | RNVC: 2
1H646: RNCC: 6 | RNVC: 9
RX-8-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-756-1096
Socket Wrench Adapter

997561096
P-892414-009: RNCC: 3 | RNVC: 2
P892414-009: RNCC: 5 | RNVC: 2

18 Jan 2001

5120-99-971-8077
Soc Extraction Tool

999718077
NO PRIMARY REF 99-971-8077: RNCC: 3 | RNVC: 2
558-1-00046: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-655-1689
Torque Wrench Adapter

996551689
P-890303-403: RNCC: 3 | RNVC: 2
P890303-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-612-1416
Speci Socket Wrench

996121416
121E-93-716-00.0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-1633
Extractor

996091633
NO PRIMARY REF 99-609-1633: RNCC: 3 | RNVC: 2
NTS12075-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-702-1366
Crowbar

997021366
46410-838-00-0: RNCC: 3 | RNVC: 2
418/1/53423/000: RNCC: 5 | RNVC: 2

15 May 1996

5120-99-626-6480
Box Ring Co Spanner

996266480
NO PRIMARY REF 99-626-6480: RNCC: 3 | RNVC: 2
077416: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-551-0801
Spindle Assembly

995510801
7494-0400: RNCC: 3 | RNVC: 2
7494-0400: RNCC: 5 | RNVC: 2
7494-0400: RNCC: 5 | RNVC: 9
85-690-4391: RNCC: 6 | RNVC: 9

11 Sep 1991

5120-99-428-8354
Mechani Puller Body

994288354
SGE3210-2330: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-521-1688
Socket Wrench

995211688
954-5683: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-189-2368
Spanner Wrench Set

991892368
PED/ACP/2306: RNCC: 3 | RNVC: 2
15241519: RNCC: 5 | RNVC: 2
A44250: RNCC: 5 | RNVC: 2

10 Feb 2009

5120-99-762-4888
Socket Wrench Screwdriver Attachment

997624888
SW/19/10/12709: RNCC: 3 | RNVC: 2
87143GB: RNCC: 5 | RNVC: 1
19692 AND 5002: RNCC: 5 | RNVC: 2

19 Oct 1984

5120-99-613-3789
Boss

996133789
892/00181: RNCC: 3 | RNVC: 2

22 Jan 2007

5120-99-750-7498
Drive Pin Punch

997507498
2040T054: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-735-7961
Open End Wrench

997357961
OPM 436: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-751-4018
Socket Wrench Adapter-Extension

997514018
MM544: RNCC: 3 | RNVC: 2
IT3304: RNCC: 5 | RNVC: 2
FL000M60136: RNCC: 6 | RNVC: 9

15 Feb 2001

5120-99-751-1125
Socket Wrench Socket

997511125
550096: RNCC: 3 | RNVC: 2

11 Nov 2010

5120-99-725-9815
Socket Wrench Socket

997259815
LSM 241: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

30 May 1992

5120-99-190-7119
Sledge

991907119
06835082: RNCC: 3 | RNVC: 2

4 Aug 2003

5120-99-135-7829
Torque Wrench Adapter

991357829
TME494AF: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-660-2742
Socket

996602742
460003566: RNCC: 3 | RNVC: 2
000DF0152: RNCC: 6 | RNVC: 9

2 Mar 2000

5120-99-124-4725

5120-99-417-3303

5120-99-254-5851
Socket Wrench

5120-99-331-1100

5120-99-223-3532

5120-99-348-0450

5120-99-282-4949
Insertion And Extra

5120-99-443-0364
Socket

994430364
G05205-201D1TEM43: RNCC: 3 | RNVC: 2
4C3467: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-156-2468
Bearing Repl Steady

991562468
90079-2753: RNCC: 3 | RNVC: 2
064QA-002: RNCC: 6 | RNVC: 9

14 Nov 2006

5120-99-983-0746
Socket Wrench Socket

999830746
S161 LOCK-ON: RNCC: 3 | RNVC: 2
S161 LOCK-ON: RNCC: 5 | RNVC: 2

25 Mar 1998

5120-99-756-8843
Spanner Wrench

997568843
T7038-403: RNCC: 3 | RNVC: 2
T7038(HTE): RNCC: 6 | RNVC: 9
99PB02-010: RNCC: 6 | RNVC: 9
XP990BG0489: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-834-8247
Six Point Tip Screwdriver

998348247
NO PRIMARY REF 99-834-8247: RNCC: 3 | RNVC: 2
SDO467: RNCC: 5 | RNVC: 2
M0019456: RNCC: 5 | RNVC: 2
662-608: RNCC: 5 | RNVC: 2

4 Sep 2007

5120-99-124-2821
Retaining Ri Pliers

991242821
NO PRIMARY REF 99-124-2821: RNCC: 3 | RNVC: 2
N0D2175-601TEM5: RNCC: 5 | RNVC: 2
223280: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9000
Tube

994119000
NO PRIMARY REF 99-411-9000: RNCC: 3 | RNVC: 2
ST2007: RNCC: 5 | RNVC: 9
27Q13599: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-773-0017
Dual- Inserter Tool

997730017
NO PRIMARY REF 99-773-0017: RNCC: 3 | RNVC: 2
424-276: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-145-0987
Pivot Removal Tool

991450987
NO PRIMARY REF 99-145-0987: RNCC: 3 | RNVC: 2
A0115442: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-110-3134
Wrench

991103134
EA6305G642-041: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-830-7979
Socket Wrench Spanner Attachment

998307979
V3626-34: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-137-0356
Screw Thread Insert Inserter

991370356
DEFSTAN51-17-2B: RNCC: 2 | RNVC: 2
M1P418: RNCC: 3 | RNVC: 2
CH748-2685-4: RNCC: 5 | RNVC: 2
DEFSTAN51-17: RNCC: 5 | RNVC: 2
32H80005: RNCC: 6 | RNVC: 9
2B: RNCC: 6 | RNVC: 9
1C8310: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-734-8937
Contac Removal Tool

997348937
BS9525 F0011-T5052/2: RNCC: 2 | RNVC: 2
T5052/2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-522-1569

5120-99-522-1573

5120-99-522-1580

5120-99-799-2616
Torque Wrench

997992616
ADS 25F: RNCC: 3 | RNVC: 2
DEF STAN 51-11 APRT 32: RNCC: 4 | RNVC: 1
010200: RNCC: 5 | RNVC: 2
H24756: RNCC: 5 | RNVC: 2
TABLE I(D): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-430-8051
Wrench Spanner

994308051
NO PRIMARY REF 99-430-8051: RNCC: 3 | RNVC: 2
EAND110051-1: RNCC: 5 | RNVC: 2
0624-10H4331: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-745-9351
Open End Wrench

997459351
T.7035-407: RNCC: 3 | RNVC: 2
T7035-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-466-0037
Inspection Mirror

994660037
CN2083: RNCC: 3 | RNVC: 2
56978-0006: RNCC: 5 | RNVC: 2
6-56978ACD4: RNCC: 5 | RNVC: 2
M1RR0R1NSPECT10N1: RNCC: 5 | RNVC: 2
A6550: RNCC: 5 | RNVC: 2
363-363472: RNCC: 6 | RNVC: 9
1B5475: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-127-9630
Hand Hammer

5120-99-454-2614
Vice Block

994542614
FHQ762: RNCC: 3 | RNVC: 2
BFHQ762: RNCC: 5 | RNVC: 2
27KF6: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9382
Rack Jack

994119382
0791-504-00-0: RNCC: 3 | RNVC: 2
HA-WMRPJ1000-600: RNCC: 5 | RNVC: 2
102JU-020: RNCC: 6 | RNVC: 9

3 Sep 2010

5120-99-824-0553
B Spring Compressor

998240553
NO PRIMARY REF 99-824-0553: RNCC: 3 | RNVC: 2
VR2139: RNCC: 5 | RNVC: 2
VR2139B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-902-1289
Screw Thread Insert Inserter

999021289
MIP414: RNCC: 3 | RNVC: 2
CH748-2685-2: RNCC: 5 | RNVC: 2
71411078301: RNCC: 5 | RNVC: 2

4 Sep 1991

5120-99-423-8206
Socket Wrench

994238206
9028-21: RNCC: 3 | RNVC: 2
558054: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-6161
Calibrati Ball Set

996666161
NO PRIMARY REF 99-666-6161: RNCC: 3 | RNVC: 2
63B1157: RNCC: 5 | RNVC: 2

23 Feb 2006

5120-99-221-0366
Socket Wrench

992210366
11-6266-8: RNCC: 3 | RNVC: 2
H21223: RNCC: 5 | RNVC: 2
1H615: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-1327
Compressor Tool

994711327
NO PRIMARY REF 99-471-1327: RNCC: 3 | RNVC: 2
37G12528: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-7901

5120-99-910-7913

5120-99-799-5949
Mechanical Puller

997995949
200886252.AFT.9: RNCC: 3 | RNVC: 2
200886252.AFT.9: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-492-8629
Setting Tool

994928629
AML12779: RNCC: 3 | RNVC: 2
001PT-026: RNCC: 6 | RNVC: 9

28 Aug 2000

5120-99-139-2241
Open End Wrench

991392241
0SA240: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1707
Lifting Tool

5120-99-617-1903
Punch

5120-99-617-5491

5120-99-610-0623

5120-99-138-4814
Hand Terminal Crimping Tool

991384814
576783: RNCC: 3 | RNVC: 2
61P00532: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-229-7840
Drift Punch

992297840
EKA20987: RNCC: 3 | RNVC: 2
08020019012: RNCC: 5 | RNVC: 2
08020019012: RNCC: 5 | RNVC: 2

25 Nov 2008

5120-99-173-0170
Puller Tool

991730170
WK3069-0011WW142: RNCC: 3 | RNVC: 2
WK3069-011/WW142: RNCC: 6 | RNVC: 9

14 Sep 1995

5120-99-541-9433
Restraint Spanner

995419433
9002-1347: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-2216
Socket Wrench Crowfoot Attachment

991302216
1950M12MM: RNCC: 3 | RNVC: 2
1950M-12: RNCC: 5 | RNVC: 2
10W50002: RNCC: 6 | RNVC: 9
440-12: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-442-3283
Hose-Wrench

994423283
NO PRIMARY REF 99-442-3283: RNCC: 3 | RNVC: 2
W1WA1580: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-423-8234
Crowfoot Spanner

994238234
NO PRIMARY REF 99-423-8234: RNCC: 3 | RNVC: 2
9029-1: RNCC: 5 | RNVC: 2
558717: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-783-7280
Allen Key

997837280
CES NKCS-04-3/1 1.1.21.2.2.2: RNCC: 3 | RNVC: 2

6 Mar 1987

5120-99-147-9427
Electrical Connector Inserter

991479427
NO PRIMARY REF 99-147-9427: RNCC: 3 | RNVC: 2
55-512: RNCC: 5 | RNVC: 2
SPCISR/11/2/11/15: RNCC: 6 | RNVC: 9
0630U-0015: RNCC: 6 | RNVC: 9

10 Jul 2006

5120-99-867-2927
Pump Handle

998672927
NO PRIMARY REF 99-867-2927: RNCC: 3 | RNVC: 2
1B7-09-101-01-9: RNCC: 5 | RNVC: 2
1039002: RNCC: 5 | RNVC: 2
E677-4 AND E683-17: RNCC: 5 | RNVC: 2
LV9AHYE677-4-5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-2228
Cable Jointin Mould

999232228
NO PRIMARY REF 99-923-2228: RNCC: 3 | RNVC: 2
822-3170: RNCC: 5 | RNVC: 2
0274-923-2228: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6360
Socket Wrench Socket

999106360
BS4006: RNCC: 4 | RNVC: 1
H20850: RNCC: 5 | RNVC: 2
F1FA17442: RNCC: 6 | RNVC: 9
1L112: RNCC: 6 | RNVC: 9
H4474: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
TABLE I(D) 25/32A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-6463
Socket Head Screw Key

991226463
MW22-5: RNCC: 3 | RNVC: 2
BS4168 PART 9-TABLE 1 2.5MM: RNCC: 4 | RNVC: 1
BS4168:PART 9: RNCC: 5 | RNVC: 1
A3146: RNCC: 5 | RNVC: 2
43-04-02-50: RNCC: 5 | RNVC: 2
43-04-00-50: RNCC: 6 | RNVC: 9
99-400-1244: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-1922
Pressing Tool

996171922
NO PRIMARY REF 99-617-1922: RNCC: 3 | RNVC: 2
HU18851-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-764-2820
Open End Wrench

5120-99-782-9640
Spanner Wrench

5120-99-753-2865

5120-99-124-0845

5120-99-794-1989

5120-99-719-2922
Serrated Bar

997192922
PE54334DET3: RNCC: 3 | RNVC: 2
0852 2315: RNCC: 5 | RNVC: 2
8522315: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-111-2111
Lock Ring Remover

991112111
S14-94-1234 51/9: RNCC: 3 | RNVC: 2

6 Apr 1994

5120-99-537-3397
Head Removal Tool

995373397
NO PRIMARY REF 99-537-3397: RNCC: 3 | RNVC: 2
VA49-0006-116: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-8689
Printed Circui Vice

991368689
NO PRIMARY REF 99-136-8689: RNCC: 3 | RNVC: 2
56340-076: RNCC: 5 | RNVC: 2
36863: RNCC: 5 | RNVC: 2

31 Jan 1977

5120-99-466-2821
Bearing Fittin Tool

994662821
TOOL-000.003: RNCC: 3 | RNVC: 2
TOOL-000.003: RNCC: 5 | RNVC: 2
A11666/2: RNCC: 5 | RNVC: 2
FH982SR0008: RNCC: 6 | RNVC: 9

26 Nov 1998

5120-99-454-7675
Spanner Wrench

994547675
AME858-332: RNCC: 3 | RNVC: 2
720647: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-747-5876
Mechanical Puller

997475876
48421A19-407: RNCC: 3 | RNVC: 2

12 Jan 1984

5120-99-800-4205
Socket Wrench

998004205
98608/1001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-468-8386
Hook Spanner

994688386
RS181-39: RNCC: 3 | RNVC: 2
27Y3562: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-700-1445
Socket Wrench

997001445
NO PRIMARY REF 99-700-1445: RNCC: 3 | RNVC: 2
FB205029: RNCC: 5 | RNVC: 9

9 Jul 1990

5120-99-471-2321
Extractor

994712321
NO PRIMARY REF 99-471-2321: RNCC: 3 | RNVC: 2
64Y 223A: RNCC: 5 | RNVC: 2
026DL-95571: RNCC: 6 | RNVC: 9

6 Feb 2002

5120-99-510-6026
Chassi Removal Tool

995106026
ST-DSP15-006: RNCC: 3 | RNVC: 2

9 Aug 2012

5120-99-246-6316
Shovel

992466316
GS10 'T' HANDLE: RNCC: 3 | RNVC: 2
BOF901917: RNCC: 5 | RNVC: 2
030KT-006: RNCC: 6 | RNVC: 9

12 Feb 2003

5120-99-135-9278
Socket Wrench

991359278
BS2558-TABLE 6 24X27MM: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6752: RNCC: 6 | RNVC: 9
TABLE I(A) 24X27MM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4673
Open End Box Wrench

994224673
N43890-6: RNCC: 3 | RNVC: 2
88604-606-102: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-163-5768
Torque Wrench

991635768
OD31920: RNCC: 3 | RNVC: 2

20 Sep 2002

5120-99-725-6467
Valve Spring Compressor

997256467
020150 R1 DL09253: RNCC: 3 | RNVC: 2

7 Sep 2009

5120-99-726-4049
Socket Wrench

997264049
H23171: RNCC: 1 | RNVC: 2
SPB306: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-3004
Adjustable Wrench

997483004
8074C: RNCC: 3 | RNVC: 2
H24822: RNCC: 5 | RNVC: 2
FF980CG0003: RNCC: 6 | RNVC: 9

2 Jul 1998

5120-99-735-0205
Half Shaf Extractor

997350205
LT57: RNCC: 3 | RNVC: 2
ST37346: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-750-7506
Cover Punch

997507506
2067T019: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-923-5923
Peg Spanner Assembl

999235923
MBEU74282: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-957-5679
Mechanical Puller

999575679
CM45603: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-99-146-0063
Wrench

991460063
AT1795: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-887-3448
Screwdriver Bit

5120-99-896-0476

5120-99-942-9597
Elec Alignment Tool

999429597
NO PRIMARY REF 99-942-9597: RNCC: 3 | RNVC: 2
P190033: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-135-4353
Cont Insertion Tool

991354353
22-0229B: RNCC: 3 | RNVC: 2
2150: RNCC: 5 | RNVC: 2
22-0229B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-432-4394
Offset Driver

994324394
NO PRIMARY REF 99-432-4394: RNCC: 3 | RNVC: 2
61-56978: RNCC: 5 | RNVC: 2
61-56978: RNCC: 5 | RNVC: 2
363-432-4394: RNCC: 6 | RNVC: 9
88870-363-158: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6297
Open End Wrench

999106297
BS192-TABLE 1 26X27MM: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4378: RNCC: 6 | RNVC: 9
TABLE I(D) 26X27MM: RNCC: 6 | RNVC: 9
TABLE 1. 26MM X 27MM: RNCC: 6 | RNVC: 9
F1FA17330: RNCC: 6 | RNVC: 9
7S2425: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-631-8213

5120-99-075-8245
Ro Positioning Tool

5120-99-700-2505
Tooth Ring Spanner

997002505
MBEU7202: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-818-7252
Socket Wrench

998187252
FV 614950: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-974-2940
Special Purpose Combination Wrench

999742940
35838D: RNCC: 3 | RNVC: 2

12 Jan 2010

5120-99-977-3525
Box Wrench

999773525
XBM1821: RNCC: 3 | RNVC: 2
XBM1821: RNCC: 5 | RNVC: 2
1C8516: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-896-7131
Woven Cable Grip

998967131
T-LD/10: RNCC: 3 | RNVC: 2
076KY-008: RNCC: 6 | RNVC: 9

7 Feb 2008

5120-99-655-1672
Mechanical Puller

996551672
P-890153-403: RNCC: 3 | RNVC: 2
P890153-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-0366
In Valve Guide Tool

997840366
CES NKCS-04-3/1 1.2.16.25.2: RNCC: 3 | RNVC: 2

6 May 1987

5120-99-814-8276
Road Tool Assembly

998148276
NO PRIMARY REF 99-814-8276: RNCC: 3 | RNVC: 2
FV193541: RNCC: 5 | RNVC: 2
LV9AHYFV193541: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-248-5203
Box Wrench

992485203
NO PRIMARY REF 99-248-5203: RNCC: 3 | RNVC: 2
W008110018: RNCC: 5 | RNVC: 2
W008110018: RNCC: 5 | RNVC: 9

1 Jun 2011

5120-99-310-9447
Ratchet Spanner

993109447
NO PRIMARY REF 99-310-9447: RNCC: 3 | RNVC: 2
UKSL4724: RNCC: 5 | RNVC: 2
4336-89: RNCC: 6 | RNVC: 9

13 Aug 2012

5120-99-408-3049
Socket Wrench Socket

994083049
NM35LA: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-641-7692
Pliers

996417692
CSDE/19240/6/13/GSS/FIG2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-422-4586
Spanner Wrench

994224586
N37270-2: RNCC: 3 | RNVC: 2
88604-606-015: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-932-7166
Mounting Ri Trolley

5120-99-923-8159
Socket Wrench Socket

999238159
BS4006: RNCC: 3 | RNVC: 1
ED710: RNCC: 3 | RNVC: 2
0277-277013: RNCC: 6 | RNVC: 9
0277-923-8159: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-5594
Spanner Wrench

994225594
N0D2175-85DET4-10: RNCC: 3 | RNVC: 2
119337: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-254-4376
Rivet Squeezer Set

992544376
AT109-AS: RNCC: 3 | RNVC: 2
AT109-AS: RNCC: 6 | RNVC: 9
1C-8758: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-109-8903
Setting Adaptor

991098903
A13275: RNCC: 3 | RNVC: 2
A13270: RNCC: 5 | RNVC: 1
992G2-0052: RNCC: 6 | RNVC: 9

7 Dec 1999

5120-99-819-8792
Removal And Fi Tool

998198792
NO PRIMARY REF 99-819-8792: RNCC: 3 | RNVC: 2
94243: RNCC: 5 | RNVC: 2
94243: RNCC: 5 | RNVC: 9

28 Jan 2010

5120-99-827-9943
Slide Hammer

998279943
NO PRIMARY REF 99-827-9943: RNCC: 3 | RNVC: 2
KMJ7004: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-442-7697
Spanner

994427697
NO PRIMARY REF 99-442-7697: RNCC: 3 | RNVC: 2
107250: RNCC: 5 | RNVC: 9

3 Aug 1983

5120-99-456-0651
Bearing A Extractor

994560651
NO PRIMARY REF 99-456-0651: RNCC: 3 | RNVC: 2
A0103176: RNCC: 5 | RNVC: 2
27A4287: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-051-2728
Socket Wrenc Socket

5120-99-781-6849

5120-99-780-7388

5120-99-962-2636
Drive Pin Punch

5120-99-931-9598

5120-99-130-1866
Gasoline Blowtorch

991301866
2235: RNCC: 3 | RNVC: 2
2235N: RNCC: 5 | RNVC: 2
259-96800: RNCC: 5 | RNVC: 2
2235: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-796-7725
Wheel Dru Extractor

997967725
CSK787: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-786-2818
Open End Wrench

997862818
NEU461: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-802-2653
Mechanical Puller

998022653
CK2926: RNCC: 3 | RNVC: 2
FV453717: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-231-7221
Mechanical Puller

992317221
15390000: RNCC: 3 | RNVC: 2

8 Feb 2006

5120-99-227-8579
Tommy Bar Assembly

992278579
ACHA592: RNCC: 3 | RNVC: 2

23 Mar 1995

5120-99-679-8276
Socket Wrench Adapter

996798276
NO PRIMARY REF 99-679-8276: RNCC: 3 | RNVC: 2
60079: RNCC: 5 | RNVC: 2

10 Jun 2004

5120-99-601-7168
Bolt Puller

996017168
453 7408-217: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-667-5980
Socket Wrench Socket

996675980
4305M-15: RNCC: 3 | RNVC: 2
3711511C1: RNCC: 5 | RNVC: 2
KK4305M-15: RNCC: 5 | RNVC: 2
KK4305M-15: RNCC: 5 | RNVC: 2

23 Mar 2010

5120-99-136-4220
Delivery Extractor

991364220
7244/50: RNCC: 3 | RNVC: 2
300-937886: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-1070
Bench Fitter Vice

994661070
NO PRIMARY REF 99-466-1070: RNCC: 3 | RNVC: 2
4673-00: RNCC: 5 | RNVC: 2
1C6833: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-642-2550
Torque Wrench Adapter

996422550
3-0WE67745: RNCC: 3 | RNVC: 2
GSE88: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-201-8737
Ratchet W Extractor

992018737
NO PRIMARY REF 99-201-8737: RNCC: 3 | RNVC: 2
444-31-814-0: RNCC: 5 | RNVC: 9
W3-00001-04535: RNCC: 6 | RNVC: 9

1 Mar 1977

5120-99-250-1553
O-Ring Install Tool

992501553
EB6505G508-101: RNCC: 3 | RNVC: 2
1MEVH2M: RNCC: 6 | RNVC: 9

22 Sep 2004

5120-99-120-9027
Hand Blind Riveter

991209027
7300-0008: RNCC: 3 | RNVC: 2
AHJ0SRF249F260: RNCC: 5 | RNVC: 2
7300-0008: RNCC: 5 | RNVC: 2
AHJ0SRF249: RNCC: 5 | RNVC: 9
EF1-4: RNCC: 5 | RNVC: 9
7300-0008: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-527-0446
Socket Wrench

995270446
296920: RNCC: 3 | RNVC: 2
296920: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-717-5394
Mandrel

997175394
T530: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-3128
Socket Wrench

991363128
1911-3386: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-870-1984
Mechanical Puller Step Plate

998701984
99360263: RNCC: 3 | RNVC: 2
CV177190: RNCC: 5 | RNVC: 2

16 Sep 2010

5120-99-773-5512
Open End Wrench

5120-99-783-1266

5120-99-632-4306

5120-99-548-1687
Stator Wi Extractor

995481687
557935: RNCC: 3 | RNVC: 2
B3176601: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-932-7682
Screwdriver Bit

999327682
030240: RNCC: 3 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

26 Oct 2009

5120-99-702-4140
Gear Tool Assembly

997024140
EB001361: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-832-2015

5120-99-942-9649
Socket Head Screw Key

999429649
P221013: RNCC: 3 | RNVC: 2
024-9730-00: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-953-7541
Cont Insertion Tool

999537541
NO PRIMARY REF 99-953-7541: RNCC: 3 | RNVC: 2
380430-2L: RNCC: 5 | RNVC: 2
R30-0719-51: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-147-1773
Box Wrench

991471773
1040-0063 GA: RNCC: 3 | RNVC: 2
10400063: RNCC: 5 | RNVC: 2

11 Jan 1995

5120-99-734-6869
Bearing And Bushing Driver

997346869
460009502-D: RNCC: 3 | RNVC: 2
460009502D: RNCC: 5 | RNVC: 2

23 Jan 1991

5120-99-559-5421

5120-99-653-3866
Socket Head Scr Key

5120-99-741-9450
Drive Pin Punch

5120-99-145-0811

5120-99-135-6215

5120-99-733-6722

5120-99-727-8311
Hand Hydraulic Jack

997278311
JAH660SR: RNCC: 3 | RNVC: 2

15 Dec 1995

5120-99-730-0712
Plug Tool

997300712
FV2030546: RNCC: 3 | RNVC: 2

18 Aug 1986

5120-99-151-8337
Socket Wrench

991518337
NO PRIMARY REF 99-151-8337: RNCC: 3 | RNVC: 2
KEY-04: RNCC: 5 | RNVC: 2
298-8671: RNCC: 5 | RNVC: 9

4 Nov 2010

5120-99-138-9369
Gear Puller Leg

991389369
NO PRIMARY REF 99-138-9369: RNCC: 3 | RNVC: 2
1194: RNCC: 5 | RNVC: 2
833L: RNCC: 6 | RNVC: 9

2 Nov 1979

5120-99-434-7205
Tap Extractor Set

994347205
NO PRIMARY REF 99-434-7205: RNCC: 3 | RNVC: 2
SCHEDULE S0120: RNCC: 6 | RNVC: 9
F1FA13205: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-355-4221
Insertion Tool

993554221
NO PRIMARY REF 99-355-4221: RNCC: 3 | RNVC: 2
AT1012: RNCC: 5 | RNVC: 2
AT1012: RNCC: 6 | RNVC: 9
A887-88-8874120: RNCC: 6 | RNVC: 9
AT1012: RNCC: 6 | RNVC: 9

26 Jun 2002

5120-99-978-1593
Screwdriver Bit

999781593
1USS3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-978-1591
Screwdriver Bit

999781591
1USB187: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4708
Hand Hammer

999104708
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
3 LB: RNCC: 5 | RNVC: 1
DEFSTAN 51-11 (PART 31): RNCC: 6 | RNVC: 9
FA14271: RNCC: 6 | RNVC: 9
0274: RNCC: 6 | RNVC: 9
910-4708: RNCC: 6 | RNVC: 9
1B1385: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-839-7012
Input Bearing Punch

998397012
FV 2014716: RNCC: 3 | RNVC: 2

19 Jun 1986

5120-99-830-4237
Adaptor Set

998304237
LC64-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-460-9719
Spanner Wrench

994609719
AME6400-8: RNCC: 3 | RNVC: 2
161284: RNCC: 6 | RNVC: 9
CJ284: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-551-6628
Pliers

995516628
T-68883: RNCC: 3 | RNVC: 2
T-68883: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-474-6030
Socket Wrench Socket

994746030
8199557-1: RNCC: 3 | RNVC: 2

4 Feb 2005

5120-99-760-6497

5120-99-710-4945
Screw Thread Insert Inserter

997104945
BA1P2: RNCC: 3 | RNVC: 2
PE8753: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
1C6984: RNCC: 6 | RNVC: 9
88620-617-291: RNCC: 6 | RNVC: 9

5 Mar 1991

5120-99-300-0119
Combination Tool

993000119
FV 2149725: RNCC: 3 | RNVC: 2
FV 2149725: RNCC: 5 | RNVC: 2

13 Feb 1990

5120-99-051-9104
Adaptor Assembly

990519104
S3S18418000: RNCC: 3 | RNVC: 1

28 Jun 1995

5120-99-666-3520
Drill And Driver Bi

996663520
705315: RNCC: 3 | RNVC: 2

21 Jan 2005

5120-99-610-4846
Socket Wrench Crowfoot Attachment

996104846
GU21921: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-427-6828

5120-99-414-1970
Anti-Torque Wrench

5120-99-166-5545
Box Wrench

991665545
110079-4571: RNCC: 3 | RNVC: 2
26VC-95567: RNCC: 6 | RNVC: 9

2 Mar 2002

5120-99-410-4017
Flat Tip Screwdriver

994104017
DB100614: RNCC: 3 | RNVC: 2
DB100123 ITEM 11: RNCC: 5 | RNVC: 2
DB100123/11: RNCC: 5 | RNVC: 2
UWS4N: RNCC: 6 | RNVC: 9

9 Jul 2004

5120-99-136-3630
Lever Lifting

991363630
YJ 70049 B: RNCC: 3 | RNVC: 2
678-937899: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-234-2981
Hand Hammer Head

992342981
6220: RNCC: 3 | RNVC: 2
12630: RNCC: 5 | RNVC: 2
5010559126309: RNCC: 5 | RNVC: 2

7 Mar 1992

5120-99-659-7991

5120-99-659-3617

5120-99-925-0065
Spanner

999250065
MBEU163479: RNCC: 3 | RNVC: 2
MBEU163479: RNCC: 5 | RNVC: 2

14 Jan 2002

5120-99-609-1654
Bearing And H Punch

996091654
NTS10908: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-198-7056
Peening Punch

991987056
T 455295: RNCC: 3 | RNVC: 2

14 Nov 1991

5120-99-130-1886
Contact Cleaner

991301886
56978-0594: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-870-4482
Pliers

998704482
NO PRIMARY REF 99-870-4482: RNCC: 3 | RNVC: 2
0100057: RNCC: 3 | RNVC: 2
4830: RNCC: 3 | RNVC: 2
00.16.08.56: RNCC: 5 | RNVC: 2
243-522: RNCC: 5 | RNVC: 2

22 Mar 2000

5120-99-702-0690
Box Wood

997020690
NO PRIMARY REF 99-702-0690: RNCC: 3 | RNVC: 2
10454: RNCC: 5 | RNVC: 9

11 Dec 1995

5120-99-760-6644
Mechanical Puller

997606644
PM3306-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-760-0160
Mechanical Puller

997600160
ESK 5029 20: RNCC: 3 | RNVC: 2
209-042334: RNCC: 5 | RNVC: 2

19 Feb 2002

5120-99-900-7217
Socket Wrench Socket

999007217
NMT-176: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-282-0871
Spanner Wrench

992820871
85/119/19/10/13002: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-560-2448
Socket Wrench

995602448
S1286A7: RNCC: 3 | RNVC: 2
H933-297656: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6246
Open End Wrench

999106246
BS192: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-137-5720
Socket Wrench Socket

991375720
PES937: RNCC: 3 | RNVC: 2
5230: RNCC: 5 | RNVC: 2
PES937: RNCC: 5 | RNVC: 2
1L612: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-551-3849
Socket Wrench Crowfoot Attachment

995513849
P5J 1524742: RNCC: 3 | RNVC: 2
0625P-239: RNCC: 6 | RNVC: 9
062CE-110: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-454-7670
Spanner Wrench

994547670
MDSK853-265: RNCC: 3 | RNVC: 2
720517: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-440-0000
React Tool Assembly

994400000
EA6405G512-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-136-3618
Piston Band Assembl

991363618
Y3J 70601: RNCC: 3 | RNVC: 2
678-280067: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6115
Hold Block

991446115
460002090-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-463-4055
Socket Wrenc Socket

5120-99-468-8378
Hook Spanner

994688378
NO PRIMARY REF 99-468-8378: RNCC: 3 | RNVC: 2
RS181-19: RNCC: 5 | RNVC: 9
27Y2363: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-413-8131

5120-99-169-4581
Fitting And Removal

991694581
POG015729: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-99-652-1207
Box Wrench

996521207
132690: RNCC: 3 | RNVC: 9
SSK10148: RNCC: 5 | RNVC: 2
CN2271: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-221-8885

5120-99-915-6544

5120-99-761-3720
Open End Box Wrench

997613720
P461S1448: RNCC: 3 | RNVC: 2
T.746/2: RNCC: 5 | RNVC: 2
11/P461S1448: RNCC: 5 | RNVC: 2
H727-460346: RNCC: 6 | RNVC: 9
998113261: RNCC: 6 | RNVC: 9
5120-99-010-0882: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-570-0725
Ratchet Wrench

995700725
B5775/12L: RNCC: 3 | RNVC: 2
001294889: RNCC: 5 | RNVC: 1
SST/Y/500/00/A002/000: RNCC: 5 | RNVC: 1
Y/500/00/A002/000: RNCC: 5 | RNVC: 1
B5775: RNCC: 5 | RNVC: 1
B5775 ITEM 12L: RNCC: 5 | RNVC: 1
B5775/12-13: RNCC: 5 | RNVC: 1
EM44315 ITEM 85: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5548
Solid Center Punch

999105548
CENTREPUNCH4INX3-8IN: RNCC: 3 | RNVC: 2
H20314: RNCC: 5 | RNVC: 2
FA15930: RNCC: 6 | RNVC: 9
1B1821: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1873: RNCC: 6 | RNVC: 9
H1873: RNCC: 6 | RNVC: 9
NIL CP316: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-657-3729
Bearing And Bushing Driver Plug

996573729
CHA750-278-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-533-1569
Special Spanner

995331569
NO PRIMARY REF 99-533-1569: RNCC: 3 | RNVC: 2
SK189: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-338-8037
Punch And Die

993388037
00163G: RNCC: 3 | RNVC: 2
E4/00163G: RNCC: 5 | RNVC: 2

5 Jan 1996

5120-99-654-5291
Umbilical Detaching

996545291
4017/675.10: RNCC: 3 | RNVC: 2
A2/4017/675.10: RNCC: 5 | RNVC: 2
4017/675.10: RNCC: 5 | RNVC: 2
A2/4017/675.10: RNCC: 5 | RNVC: 2
99PG01 392: RNCC: 6 | RNVC: 9

27 Jul 1999

5120-99-721-9201
Washer

997219201
460009275-3: RNCC: 3 | RNVC: 2
460009275DETAIL3: RNCC: 6 | RNVC: 9

4 Dec 1985

5120-99-008-0294
Axle Shaft Adaptor

990080294
RG16A-6: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-984-7031
Inserter Assembly

999847031
PE59813: RNCC: 3 | RNVC: 2
64DE1116: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-977-3704
Mechanical Puller

999773704
01TC11026: RNCC: 3 | RNVC: 2
01TC11026: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-991-2229
Foot Alignment Jig

999912229
AJ.375: RNCC: 3 | RNVC: 2
3AP5221: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-978-1596
Screwdriver Bit

999781596
1UPZD1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-981-6489
Manual Impact Wrench

999816489
NK300: RNCC: 3 | RNVC: 2

18 May 2006

5120-99-212-6135
Bag

992126135
517.001.228: RNCC: 3 | RNVC: 2

9 Sep 2003

5120-99-500-1896
Socket Head Screw Key

995001896
FV 2106724: RNCC: 3 | RNVC: 2
043724: RNCC: 5 | RNVC: 2
FV 2106724: RNCC: 5 | RNVC: 2

5 Jan 1995

5120-99-467-4735
Mechanical Puller

994674735
ST2477: RNCC: 3 | RNVC: 2
27Q17824: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-319-5011
Socket Wrench Crowfoot Attachment

993195011
N09689: RNCC: 3 | RNVC: 2

17 Dec 1998

5120-99-517-5012
Screwdriver Bit Set And Handle

995175012
9002-1897: RNCC: 3 | RNVC: 2

25 Jun 1998

5120-99-729-2187
Wrench Socket

997292187
104-089-0: RNCC: 3 | RNVC: 2

6 Dec 2001

5120-99-562-5067
Hand Terminal Crimping Tool

995625067
13656: RNCC: 3 | RNVC: 2
13656: RNCC: 5 | RNVC: 2
011E1 - 001: RNCC: 6 | RNVC: 9

5 Jun 2001

5120-99-105-3117

5120-99-454-7681
Spanner Wrench

5120-99-454-7752

5120-99-459-0799
Box Wrench

5120-99-454-7659

5120-99-454-7639
Spanner Wrench

5120-99-759-9251
Ratchet Wrench

997599251
4: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-836-1260
Spanner Wrench

998361260
V4164-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-641-2076
Socket Wrench Spanner Attachment

996412076
PERTHLYNXGSE71-5: RNCC: 3 | RNVC: 2
AL40104: RNCC: 5 | RNVC: 2
GSE71-5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-715-1718
Hammer

997151718
NO PRIMARY REF 99-715-1718: RNCC: 3 | RNVC: 2
F1FA14098: RNCC: 5 | RNVC: 2
T20N7-39: RNCC: 5 | RNVC: 2

15 Apr 1977

5120-99-942-9648
Wrench Key

999429648
NO PRIMARY REF 99-942-9648: RNCC: 3 | RNVC: 2
P221011: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-810-6217
Socket Wrench Socket

998106217
BS4006-TABLE 23: RNCC: 4 | RNVC: 1
FV 2209181: RNCC: 5 | RNVC: 2

12 Mar 1997

5120-99-136-4551
Torque Wrench Adapter

991364551
0TH820: RNCC: 3 | RNVC: 2
29707: RNCC: 5 | RNVC: 2
H6846: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-103-5315
Socket Wrench Adapter-Extension

991035315
17103-186: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-911-7122
Spanner Peg

999117122
MBJ9146: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-333-3183

5120-99-333-3174

5120-99-419-9471

5120-99-558-8332
Box Wrench

995588332
95406 ITEM 12: RNCC: 3 | RNVC: 2
95406-12: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-723-0299
Spanner Wrench

997230299
7143 053 030: RNCC: 3 | RNVC: 2
C/7143 053 030: RNCC: 5 | RNVC: 2
SU-7143-053-030: RNCC: 5 | RNVC: 2
7143 053 030: RNCC: 6 | RNVC: 9
FJ9519C0004: RNCC: 6 | RNVC: 9

21 Dec 1995

5120-99-122-9531
Coil Thread Nozzle

991229531
A30-5: RNCC: 3 | RNVC: 2
1C7549: RNCC: 6 | RNVC: 9
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-427-8117
Cross Tip Screwdriver

994278117
T-67864: RNCC: 3 | RNVC: 2
T-67864: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-548-1171
Hand Hammer

995481171
KEN-525-6270K: RNCC: 3 | RNVC: 2
525-6270K: RNCC: 5 | RNVC: 2
FS990IO0050: RNCC: 6 | RNVC: 9

10 Mar 1999

5120-99-100-1176
Open End Wrench

5120-99-304-5246
Socket Head Scr Key

5120-99-419-1255

5120-99-127-5591

5120-99-459-3271
Spanner

5120-99-724-3933
Torque Tool

997243933
CHA139539: RNCC: 3 | RNVC: 2
4TU4930005: RNCC: 6 | RNVC: 9

20 Aug 2005

5120-99-435-7021
Spanner Wrench

994357021
S2036A06: RNCC: 3 | RNVC: 2
5UA7913: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-8821

5120-99-827-2607

5120-99-222-1801

5120-99-253-5958
Torque Wrench

5120-99-588-1339
Socket Wrench Socket

995881339
4305A-1/2: RNCC: 3 | RNVC: 2
3687412C1: RNCC: 5 | RNVC: 2
KK4305A-1/2: RNCC: 5 | RNVC: 2
KK4305A-1/2: RNCC: 5 | RNVC: 2

19 Nov 2009

5120-99-738-8122
Bearing And Bushing Inserter And Remover

997388122
EA6305G605-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-133-3595
Hand Tool

991333595
STD419D/3Y: RNCC: 3 | RNVC: 2
26DL-95974: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-164-4210
Machinist's Scriber

991644210
TL-502-284: RNCC: 3 | RNVC: 2

28 Nov 2007

5120-99-299-0297
Fine Rachet

992990297
NO PRIMARY REF 99-299-0297: RNCC: 3 | RNVC: 2
S713A: RNCC: 5 | RNVC: 2
C569-70T269309: RNCC: 6 | RNVC: 9

10 Apr 2002

5120-99-227-5698
Drive Pin Punch

992275698
W 5747 309: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-401-3872
Different Extractor

994013872
262757: RNCC: 3 | RNVC: 2
262757: RNCC: 5 | RNVC: 2
262757: RNCC: 5 | RNVC: 2
LRT-54-505: RNCC: 5 | RNVC: 2
262757: RNCC: 5 | RNVC: 2
R0262757A: RNCC: 5 | RNVC: 9
16C5471: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-593-8961
Letting Down Tool

995938961
WKA37021: RNCC: 3 | RNVC: 2

1 Sep 2009

5120-99-983-1210
Waveguide Kit

999831210
3924-23083: RNCC: 3 | RNVC: 2

26 Jan 2007

5120-99-382-5545
Spanner Wrench

993825545
SST/Y/581/00/0106/103: RNCC: 3 | RNVC: 2
001293661: RNCC: 5 | RNVC: 1
SST/Y/581/00/0106/000: RNCC: 5 | RNVC: 1
Y/581/00/0106/000: RNCC: 5 | RNVC: 1
Y/581/00/0106/000 PART 103: RNCC: 5 | RNVC: 1
Y/581/00/0106/000-103: RNCC: 5 | RNVC: 1
Y/581/00/0106/103: RNCC: 5 | RNVC: 1
SST/Y/581/00/0106/000 PART 103: RNCC: 5 | RNVC: 2
SST/Y/581/00/0106/000-103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-126-1803
Int Extraction Tool

991261803
HT4241-007: RNCC: 3 | RNVC: 2
39-8804: RNCC: 5 | RNVC: 2
109-152: RNCC: 5 | RNVC: 2

31 Aug 1995

5120-99-136-5022
Socket Wrench Screwdriver Attachment

991365022
H6850: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
K7C-M50-3MM: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-216-2427
Cross Tip Screwdriver

992162427
EA6305G664-107: RNCC: 3 | RNVC: 2

29 Mar 2013

5120-99-801-8790
Spanner Wrench

998018790
FV 438694/8: RNCC: 3 | RNVC: 2
AT581: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-746-8678
Socket Wrench Socket

997468678
AK77: RNCC: 3 | RNVC: 2
85-101-2435: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-125-5015
Cleaner And Burnish

991255015
NO PRIMARY REF 99-125-5015: RNCC: 3 | RNVC: 2
K8124-7: RNCC: 5 | RNVC: 2
1A4639: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-5504
Mechanical Puller

996595504
CHA749-162-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-740-6531
Core Plug Remover

997406531
BR90-13-34-01-0005: RNCC: 3 | RNVC: 2

27 Apr 1995

5120-99-819-1780
Drift

998191780
FV719627-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-956-4931
Skeleton Mastic Gun

999564931
31 6124: RNCC: 3 | RNVC: 2

4 Feb 1993

5120-99-957-6805
Spanner Attachment

999576805
213747: RNCC: 3 | RNVC: 2

27 Feb 1998

5120-99-614-8874
Hexagon Bit

996148874
A1010015: RNCC: 3 | RNVC: 2

26 Apr 2001

5120-99-168-6470

5120-99-136-9252

5120-99-139-1032

5120-99-864-5559
Seal Inserter

998645559
892/00891: RNCC: 3 | RNVC: 2

28 Sep 2012

5120-99-208-8942
Front Tie Down Bar

992088942
NO PRIMARY REF 99-208-8942: RNCC: 3 | RNVC: 2
GMC76002: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-962-2550
Open End Wrench

999622550
RGF11283-146: RNCC: 3 | RNVC: 1
257676: RNCC: 6 | RNVC: 9
M4MC1614: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6166
Box Wrench

999106166
BS3555: RNCC: 4 | RNVC: 1
H20960: RNCC: 5 | RNVC: 2
640-4-14101: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H2430: RNCC: 6 | RNVC: 9
F1FA17155: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-1071
Nuts And Brackets

994661071
H: RNCC: 3 | RNVC: 2
1C6868: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-883-5717
Spanner Wrench

998835717
FEN-NG-211: RNCC: 3 | RNVC: 2

27 Oct 1992

5120-99-935-3558
Pull Shaft Assembly

999353558
SGE3210-1330: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-910-4628
Hand Hammer

999104628
DL9A-H1180: RNCC: 2 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
H1180: RNCC: 6 | RNVC: 9
1B1306: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-795-5354
Mechanical Puller

997955354
CHA754-521-407: RNCC: 3 | RNVC: 2

14 Sep 1989

5120-99-829-8867
Shaft Remover

998298867
V3609-12: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-819-1797
Mechanical Puller

998191797
FV719119-1SSUE1: RNCC: 3 | RNVC: 2
AT849: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-224-0266

5120-99-332-9653

5120-99-001-4867
Wrench Key

990014867
NKT003: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-899-9392
Torque Wrench

998999392
TL167: RNCC: 3 | RNVC: 2

4 Mar 2013

5120-99-391-2344
Block

993912344
EA6405G512-101: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-99-462-4898
Spanner Wrench

994624898
12057: RNCC: 3 | RNVC: 2
0612-3253: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-905-9719
Cable Type Ratchet Lever Puller

999059719
J5: RNCC: 3 | RNVC: 1
CM9926: RNCC: 5 | RNVC: 2
AB/5/2/13203: RNCC: 5 | RNVC: 2
AB/5/2/13203: RNCC: 5 | RNVC: 2

15 Mar 1996

5120-99-131-2245
Tube Brush

991312245
2IN.: RNCC: 3 | RNVC: 2
B125-7773344: RNCC: 6 | RNVC: 9

9 Jan 2002

5120-99-666-4871
Fixture Tool

996664871
558-1-05615: RNCC: 3 | RNVC: 2
4TU4901005: RNCC: 6 | RNVC: 9

2 Aug 2005

5120-99-224-1012
Opt Riveting Hammer

992241012
NO PRIMARY REF 99-224-1012: RNCC: 3 | RNVC: 2
4B02220: RNCC: 5 | RNVC: 2

3 Jul 1989

5120-99-136-5904
Retaining Ring Pliers

991365904
EBS: RNCC: 3 | RNVC: 2
11-454-19-10-1762: RNCC: 5 | RNVC: 2
MODEL EBS: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-109-7519
Socket Wrench Handle Bar

991097519
51-12-719: RNCC: 3 | RNVC: 2

9 Sep 1991

5120-99-333-1291

5120-99-436-0351
Torque Adaptor

994360351
NTS9011: RNCC: 3 | RNVC: 2
5UA9160: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-930-2139
Hand Hydraulic Jack

999302139
132094 MODIFIED TO 20 TONNE SWL: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-938-8160
Torque Wrench Adapter

999388160
29716: RNCC: 3 | RNVC: 2

8 May 2012

5120-99-395-8562
Hand Hammer

993958562
NO PRIMARY REF 99-395-8562: RNCC: 3 | RNVC: 2
63350: RNCC: 5 | RNVC: 2

8 Jun 2004

5120-99-910-8005
Pick Head Non Magne

999108005
UCW3089/57: RNCC: 3 | RNVC: 2
0279-15142: RNCC: 6 | RNVC: 9
15142: RNCC: 6 | RNVC: 9
AP 15142: RNCC: 6 | RNVC: 9

17 May 1994

5120-99-987-8471
Hand Rivet Snap

999878471
8040/0632/AC: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-99-797-4130
Socket Head Driver

997974130
703-18-2-12546/2: RNCC: 3 | RNVC: 2

7 Aug 1985

5120-99-659-5506
Mechanical Puller

996595506
CHA749-167-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-710-9316
Ratchet Wrench

5120-99-910-6461
Textile Marki Stamp

5120-99-496-6387
Probe Tool

994966387
DW 9203: RNCC: 3 | RNVC: 2

15 Nov 2007

5120-99-051-2170
Pis Protection Tool

990512170
PC19077: RNCC: 3 | RNVC: 2
PC19077: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-1735
Mechanical Puller

996171735
HU17157: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-718-9494
Socket Wrench Socket

997189494
AHM8: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-688-1328
Socket Wrench Screwdriver Attachment

996881328
00806022: RNCC: 3 | RNVC: 2

13 Feb 2003

5120-99-954-3195
Socket Head Screw Key

999543195
W2: RNCC: 3 | RNVC: 2
H01172: RNCC: 5 | RNVC: 2
EDA902596-3: RNCC: 5 | RNVC: 2
WR10000-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-954-3005
Cont Insertion Tool

999543005
NO PRIMARY REF 99-954-3005: RNCC: 3 | RNVC: 2
558-1-00579: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-398-9215
Leveling-Support Jack

993989215
B364-A0008: RNCC: 3 | RNVC: 2
1169G-004: RNCC: 6 | RNVC: 9

23 Sep 2011

5120-99-905-9190
Torque Wrench

999059190
016000: RNCC: 3 | RNVC: 2
S14-80-0001XAA/99/1: RNCC: 5 | RNVC: 2
3P223829: RNCC: 5 | RNVC: 2
016000: RNCC: 5 | RNVC: 2
6880-5280: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-108-3582
Spanner Wrench

991083582
SST/Y/581/00/0207/104: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-916-4189
Spanner Wrench Handle

999164189
WG1488-0154-103: RNCC: 3 | RNVC: 2

22 Dec 2012

5120-99-710-7231
Socket Wrench Socket

997107231
PE16163: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-2368
Flat Tip Screwdriver

991362368
DEF STAN 51-11 (PART 17): RNCC: 4 | RNVC: 1
BS2559:PART 1: RNCC: 4 | RNVC: 1
2484-9000-022: RNCC: 5 | RNVC: 2
453 7094-009: RNCC: 5 | RNVC: 2
5006-8: RNCC: 5 | RNVC: 2
145-145: RNCC: 5 | RNVC: 2
H6877: RNCC: 6 | RNVC: 9
99-782-7622: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-277-6624
Clutch Ti Baseplate

992776624
CP13737: RNCC: 3 | RNVC: 2
118267ST: RNCC: 6 | RNVC: 9

5 Feb 1990

5120-99-654-6913
Torque Wrench Adapter

996546913
A0118088-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-7996
Open End Wrench

997357996
SLM 6460: RNCC: 3 | RNVC: 2
T2AB4103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-735-7971
Open End Wrench

997357971
OPW 214: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-540-0468
Socket Wrench Handle Bar

995400468
TZ499070: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-7077
Torque Wrench

991207077
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
EVT600A: RNCC: 5 | RNVC: 2
575-453: RNCC: 5 | RNVC: 2
04-6953-9: RNCC: 5 | RNVC: 2
H22492: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H5989: RNCC: 6 | RNVC: 9
H21311: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-251-9199
Torque Tool Assembl

992519199
904802-0835-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-714-1820
Torque Wrench

997141820
C1CALIBRATED: RNCC: 3 | RNVC: 1
DSR1662-17: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-9268
Leg

997219268
460009231-9: RNCC: 3 | RNVC: 2
460009231DETAIL9: RNCC: 6 | RNVC: 9

2 Sep 1989

5120-99-250-5182
Centering Tool

992505182
006-01-05-0/0M1: RNCC: 3 | RNVC: 2
002FZ0003: RNCC: 6 | RNVC: 9

28 Nov 2000

5120-99-701-3868
Bearing And Driver

997013868
01T C 12916: RNCC: 3 | RNVC: 2

28 Jul 1992

5120-99-297-5959
Drill Guide

992975959
784825-AC: RNCC: 3 | RNVC: 2
784825-AC: RNCC: 5 | RNVC: 2
NPPO(S)3B3: RNCC: 6 | RNVC: 9

30 Aug 2000

5120-99-886-5327
Socket Wrench Socket

998865327
4305A-3/4: RNCC: 3 | RNVC: 2
3687415C1: RNCC: 5 | RNVC: 2
KK4305A-3/4: RNCC: 5 | RNVC: 2
KK4305A-3/4: RNCC: 5 | RNVC: 2

19 Nov 2009

5120-99-127-6331
C Clamp

991276331
119-2 1-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-937-1355
Socket Wrench Handle Sliding T-Head

999371355
T-13256: RNCC: 3 | RNVC: 2
T-13256: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-461-9714
Assembly Sleeve

994619714
HP224: RNCC: 3 | RNVC: 2
D368: RNCC: 5 | RNVC: 2
27Z1056: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-838-3251
Flywheel Be Remover

998383251
NO PRIMARY REF 99-838-3251: RNCC: 3 | RNVC: 2
7600: RNCC: 5 | RNVC: 2
LV7RT7600: RNCC: 6 | RNVC: 9

7 Aug 1990

5120-99-422-4641
Open End Wrench

5120-99-418-4896

5120-99-415-5738

5120-99-418-4851
Bearing Pusher

5120-99-423-7957
Socket Spanner

5120-99-307-1736
Wrench Spanner

Load More Results